Jump to content
SAU Community

Recommended Posts

Hey guys, I'm in the process of shopping around for a new fmic and was wondering about which is the best 'cooler to get. I've been looking at ordering a Trust one from Japan which sounds pretty good but I also saw Xspeed had HKS Type S kits for a reasonable price (if they have them in stock). Which would be the better choice? I was also considering a Hybrid kit as I've heard they are pretty good. But the Hybrid kit is a bar & plate design where as the Trust and the HKS ones are tube & fin (pretty sure). Is there much difference between these designs? Any thoughts guys?

"If I had one wish in the world, it would be to feel what it was like to wear something that had been ironed."

Link to comment
https://www.sau.com.au/forums/topic/53608-cooler-stuff/
Share on other sites

hehe, i know what your on about Loz :P

I think though that Kym (strechnine) has devised a plan after his DIY install.

I will be checking out his handy work and see if i should attempt the master feat :( and if i find it easy enough... Loz, for your birthday...whenever that is... and with Paulies permission... i will do your piping as a gesture of good will :D

God bless,

Nate

Link to comment
https://www.sau.com.au/forums/topic/53608-cooler-stuff/#findComment-1052085
Share on other sites

awww thanks Nate :grouphug: Im good at handing out tools and passing beer or lemonade ..... whatever your poison may be :D

P.S - Bday is in May ...... how about chrissy present haha

i will be installing mine this christmas holidays after i get all the piping gear.

I will be checking out Kym's install at the dyno shootout on sunday... trying to get all the help he can offer ;)

I will keep you informed though Loz.

im just worried about cutting the Bomex front bar to make the cooler fit behind :(

See you sunday,

God Bless,

Nate

Link to comment
https://www.sau.com.au/forums/topic/53608-cooler-stuff/#findComment-1052981
Share on other sites

I decided to go with the Trust/Greddy intercooler kit. Only gonna cost me $1264 for the kit itself, but that's not including the shipping from Japan which I reckon will be about 19500 Yen (roughly $247 maybe?) Good value!

"paaaaaaaaanch the caaaaaaaant!"

Link to comment
https://www.sau.com.au/forums/topic/53608-cooler-stuff/#findComment-1061589
Share on other sites

'Good value' as in excellent, not good value as in value for money. It's just one of my sayings, like mintox. Remember mintox? After I've put the 'cooler in I was going to look at tuning options. Would a S-afc be better, or should I go the whole hog and get a Power FC or similar setup as they would give me more tuning options. Any recommendations?

Can you name the car with four wheel drive?

Smells like a steak and seats thirty five!

Canyonero! Canyonero!

Well, it goes real slow with the hammer down.

It's a country-fried truck endorsed by a clown!

Canyonero! Canyonero!

Twelve yards long and two lanes wide,

Sixty five tonnes of American pride!

Canyonero! Canyonero!

Top of the line in utility sports!

Unexplaned fires are a matter for the courts!

Canyonero! Canyonero!

She blinds everybody with her super-high beam,

She's a squirrel-squashin', deer smackin' drivin' machine!

Canyonero! Canyonero!

Link to comment
https://www.sau.com.au/forums/topic/53608-cooler-stuff/#findComment-1063276
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Dredgggggeeee time; I have recently finally started driving the car. It sat for so long that the fuel tank gave birth to rust sludge and blocked my lift pump sock and one of my walbro 460's and left grime, rust chunks and muck all through the surge tank and system. I decided to commit and pull the trigger on an oem r32 gtr fuel tank and Frenchys twin 460 / sender / surge tank hanger combo and all new larger lines and fittings etc, also boost doc heater hose kit / new heater core and a heap of other bits and shits like wideband sensor installed in the dump and Syltech iacv + lines and all wired and added to current tune. now having lightly driven it a couple times without issue, I can happily report on the hta3076 in its current tune. still no boost control switched on, 20psi gate springs, car makes 22psi at 3200rpm in 6th gear with 30-50% TPS from cruise at 100kmh. Going by the old graph, this means it should be making 300-325whp at the same numbers above. Very very responsive setup under true road driving loads. all that's left for the build is body loom + PDM, finish the remote aircon setup, install carbon fibre parts and go for full tune and 30psi. the 315 rear tyres are now performing like they're 195's, wheel spin in any gear at almost any rpm, whereas my previous setup hooked up in 3rd no issue, albeit Nt01's back then / RB25 5spd vs (new) old date r888r's Z34 6spd now, + obviously all the support upgrades I listed in the quoted post above. car sits at 1-3psi on cruise at 100kmh, expectations totally exceeded and I'm beyond stoked with all this so far. IMG_4848.mov
    • I've also been eyeing their rear axles for my car. I purchased seat mounts from them about 7 years ago and they were hot garbage so I've been a little wary about purchasing them. With that being said, please buy them and get back to us haha. 
    • Can a moderator please move this into the right category.. I've accidently put this into racing build thread 🤦🏽‍♂️
    • Being a manual, we very quickly ordered new R34 gearbox (From Nissan) and remaining parts from Kudos motorsports. Would highly recommend the team there. Ultra helpful and quick to share advice and upgrades. We are in the middle of taking the Auto out (Genuine 94,000/kms) and putting the Manual in this weekend. Part 2 of the build will include likely a Plazaman Intercooler and Plenium, Hks Exhaust with Tomei Dump (ordered).
×
×
  • Create New...