Jump to content
SAU Community

options for my car

linxus40

By linxus40,
in Engines & Forced Induction

 Share

Recommended Posts

linxus40 Community Regular

linxus40

Posted
Posted

basicaly i have a r32 gts-t that has an upgraded turbo (looks like a t3) that atm is very late on boost (set to 1bar) i need to be at just under 5000rpm to feel the kick.

it has a stock cooler, 3" exhaust and extra injectors attached to the intake running of a rebic ii fule computer.

been playing with the rebic and even the almost lowest setting it seems to be overfuleing because as soon is it kicks in i can feel the power loss. driving with the rebic not on, once im above 6000rpm i can feel the car sort of slowing for a second then acelerating, slowing again then acelerating. (i think that means im getting lean so prefer to let the rebic overfule to be on the safe side).

what im planning is to get a front mount into the car the lift boos a bit, to maybe 1.1 bar it a tad under.

i hear the the greedy e-manage can controll the extra injectors and uses the cars sensors to fule the car correctly as well as being programable and tuneable. maybe in effect making it possible to get the car to come on boost a lot sooner.

what do you guys think about this, is this the best option or is there something better i could spend my cash on. prolly looking at 200-220rwkw in the end (maybe more) with a car that is not going to explode within a week.

Link to comment
https://www.sau.com.au/forums/topic/53900-options-for-my-car/
Share on other sites
Bass Junky Grand Master

Bass Junky

Posted
Posted

Get it on a dyno and put a computer on that people know how to tune easily.

You shouldn't really need extra injectors on 1.1 bar on your engine, they should juuust be enough for the engine.

Get it on a dyno.

cameron Mentor

cameron

Posted
Posted

Why on earth would you have an extra injector ? - Cold fuel helps engine performance, Engine is leaning out, One injector might be cloged or broken. :confused:

Sure its not a NOS solinoid ?

You can use adjustable cam gears to help bring on boost earlier. Other than that sounds like a R34 GTT turbo to me. :D What are the numbers on the compressor housing ? If you have any pictures that would be great if you need identification.

:D

Jun

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Duncan
      What brakes on R34 GTT(Europe)

      By Duncan · Posted

      Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • 04-LOOX
      R34 GTR Vspec Garage Sale - All must go!

      By 04-LOOX · Posted

      Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...