Jump to content
SAU Community

who to call for water pump & timing belt?


NickR33
 Share

Recommended Posts

Hi guys, been getting most of the parts for my rebuild from Rocket but they don't stock water pumps or timing belts... anyone know of somewhere that does or should I just call Nissan...

Anyone have the part numbers for a timing belt and water pump for the RB25DET?

Thanks guys

(off topic... anyone watch the new southpark on the other night... :spcartman ...so funny it hurt)

Link to comment
Share on other sites

you can get the belt from nissan about $83, the pump about $160.

 

try blacburn nissan they usually have them in stock.

Thanks JETDAT... you were correct to the dollar... and they had them in stock... rebuild is complete, just waiting to go back in the car

:headspin: :headspin: :headspin: :headspin: :headspin:

Link to comment
Share on other sites

Stock turbo unfortunately...still not 100% on how I killed it with the stock turbo, must just be a special talent hey...

They have done a complete head and bottom end recondition, bored out the cylinders etc, etc... Chose to leave the rods standard but upgraded to some 20 thou oversize Arias pistons and rings, and some (156) Tomei Poncams but the cams aren't here yet so may have to go in later...doh!

other mods are pretty basic, Blitz SBC spec R, SAFC2, Blitz 3.5 dump back zorst, Pod... yada yada... was waiting on a FMIC to arrive from Japan when it went bang... well it didn't really go bang, more of a clunk, clunk, rattle... lol!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Anyone know anything about a r34 350z lsd diff conversion?.  I have 350z lsd conversion layin around and thought about chucking it in my r34 I got all the offset adapters but am having trouble figuring out on how to get a speedo reading. Any help would be appreciated thanks   (I have both speedo sensors from r34 and 350z)  
    • Like dis? https://justjap.com/collections/silicone-joiners
    • Hmmm, seems like these things are car of the week....we bought a q50 Red Sport today too (ironically, the one I said a few posts above is probably dodgy  ) Goes good for a stocker. Brakes and tyres need doing all round and it is way overdue for an oil change, but it seems good otherwise. It was weird to be able to see (and even drive!) a car before I bought it, most stuff I get 2 or 3 grainy pics and an auction sheet I can't read, followed by a 4 month wait to see what I ended up with
    • I was able to improve to a 3:46.7 which was .5 slower than silver. I just couldn't do any better but then I was able to just link the sections so nicely and got a 3:44.6. stoked with that.  AMG around Barcelona looks good. I'll save that for the weekend.
    • hey GTSboy thanks for the quick reply. im on stock ECU  Surprisngly enough i unplug everything and replug everything, readings are still off but the car drove...ok haha So far this is what i have done. - Replaced ECU (still 1.5v) - Replaced Boost sensor (still 1.5v) Now the next thing i tried is to unplug the TPS and only plug in the Boost sensor to see if it reads 5v. No it still only read 1.5v.  Its a new boost sensor and i know i have 5v if i dont plug the sensor back in, so that means the power wire is good. So now im thinking that it might be a bad ground on the boost sensor plug.  on the FSM says the ground to the boost sensor is  a sensor ground, can i add a ground wire from the boost sensor ground wire to the the engine itself to ground it? or chassis?
×
×
  • Create New...