Jump to content
SAU Community

compliance goldcoast?

predator

By predator,
in Queensland

 Share

Recommended Posts

predator Grand Master

predator

Posted
Posted

Anybody know of anywhere good on the goldcoast to get a car complied? Preferably somewhere where somebody has had their car complied in the last 12 months and has some first hand experience.

Mine shall be here in a couple of weeks.. just wondering whether there were any places down here that came recommended at a good price, with as little dodginess as possible.

Might be nice to get it done somewhere locally. Then again I might just get it all done up in Brisbane, then I just can go up there and pick it up.

p.s. my car is in the yellow dot right now :)

Animation06.gif

:D

Link to comment
https://www.sau.com.au/forums/topic/55285-compliance-goldcoast/
Share on other sites
Nexus9 Grand Master

Nexus9

Posted
Posted

I just heard on the news that there was a Tsunami around the area of the yellow dot Gordo :D

Seriously though PM Jason (JLNewton) as I think he had all three of his cars complied on the Coast

predator Grand Master

predator

Posted
  • Author
Posted

yeah, its 15 year..

I thought about doing the work myself, replacing things like cat, seatbelts, brake light, etc.. then getting engineer to do intrusion bars. I have room here to work on it.

Just got to weigh up cost of somebody else doing it for $1200 or so, or doing it myself, buying the parts, and go from there. I have a feeling the DIY may be up around $700 (any idea exactly how much it will cost me ??).. if I can just take it somewhere and in a week pick it up all done and ready to register, that is very tempting.

Shipping could be around $100 just to get it to the goldcoast though from the docks. Guess that is not too bad if I end up doing much of the compliance myself.

If I get it done up brissie though, I just pick the car up, take it to the nearest transport dept, and straight to the goldcoast.

*dilema*

jlnewton Grand Master

jlnewton

Posted
Posted

Yeah, got both my cars complied down the Coast. If you need any details or info drop us a PM Gordon. I found this guy good to deal with, other people have had different experiences though, but personally I found him upfront and easy going.

rsx84 Veteran

rsx84

Posted
Posted

theres a place at nerang thats will do it i think its around the $500 mark ( don't know where i got that figure from??) post up a contact # tonight for you, but i'm talking to a place tomorrow about a compliance plate for my car, engine swap and the other bits, but i'll ask for a price on the import compliance your looking for tomorrow..

predator Grand Master

predator

Posted
  • Author
Posted

That would be great... at the moment its at Brisbane docks getting looked at by customs. Once that's done (few days more I think) going to get it shipped down via car carrier to my place, where I might do some of the work myself.

Then can just get it taken to a place that can write out the engineers, and then to the transport dept. for rego.

rsx84 Veteran

rsx84

Posted
Posted

from the place i'm going to talk to tomorrow i was told its $165 for the inspection and mod plate through them but i'll confirm that first. the blokes name is Jason Ruse, automotive techique ph # 07 5537 1515 there in labrador just off brisbane road, round the road from Dyson rotorary...

pentae Mentor

pentae

Posted
Posted

I dont mean to hijack the thread or anything, but instead of starting another one about compliance centers in brisbane i'm sure if ANYONE in either gold coast or brisbane has had their r32 gtr complianced under 15yo rule, how much did it cost you and what needed to be done?

My GTR is completely stock standard, stock muffler etc. I have a local muffler guy who will swap the cat to a new one virtually for free, but if its the stock cat do you still have to change it?

Yotis Experienced

Yotis

Posted
Posted

Predator: good stuff.. I would be very interested in your experience from gettin the car complied to getting it on the road. Mine's at the customs atm too (no its not a line.. :) ) so I will have to go throught the same thing as you soon. :( Diff is that the person that is importing my car will also be arranging compliancing.

Pentae: I believe there is a threat at the "Importation, Laws and Regulations section" on what needs to be done for a R32 GTR's compliancing, it might even be a DIY use the search option man. :)

I would also be interested to see how long your car took going throught the custom, as I have been told its anywhere between 4 days till 3 weeks. :)

  • 8 months later...
predator Grand Master

predator

Posted
  • Author
Posted

Hey matt.. um its the one behind smith street in Southport..

adrenaline i think it was.. they didn't do my actual compliance, but they were friendly about letting the engineer they use tick off my work.. and they looked quite legit, and had decent service.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • PranK
      R35 GT-R production ends after 18 years

      By PranK · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...