Jump to content
SAU Community

Recommended Posts

  • Replies 237
  • Created
  • Last Reply

Top Posters In This Topic

I was gonna head out and watch a flick at the cinemas, but why head out when I can be entertained at home with this thread!!!

Me, I'm heading out the door to the workshop to finish making the Stagea air deflector. Doing work on the car is much more rewarding.:rofl:

BTW- thanks for the pm entitled stupid ****. it went alot like this.

hahahahahaha. thanks for this awefully funny pm, i nearly cried laughing.

TJ SHUT THE **** UP!!!!! Seriously man just shut your fingers down(only because you never say it in person to ANY of the guys) and relax.

You know i am a neutral person as does everyone but seriously man, shut the **** up, you have dribbled more shit in the last few posts(and weeks) than more assholes output in their entire lifetimes...

Leave Steve and SST alone, or i will have words, you are just going beyond reasonable and your being a ****ing child. What you are doing is called "slander" and a good lawyer could have your ass for it. Look it up if you dont belive me.

Nice cut and paste above about the injectors by the way, very informative shame its not your own writing.

If you have something as bad to say as you can say on the internet maybe you should pop down sometime and have a say in person like a real man and not some internet ****ing hero.

Just relax, take your pills and calm the **** down, no one wants to hear it. I have always been nice to you no matter what other shit was going on but looking at this, dude your just being a **** head.

Im not going to check this for a reply as i dont have a skyline anymore but feel free to pm me or come see me in person about anything i have said as i will tell it to your face. Pull your head in

- Jack Campbell :flamed:

Ps. Aidwin says he isnt going to change your spark plugs for you anymore...

Leave Steve and SST alone, or i will have words, you are just going beyond reasonable and your being a ****ing child. What you are doing is called "slander" and a good lawyer could have your ass for it. Look it up if you dont belive me.

Jack, please check my posts carefully. I have NOT bagged SST anyhwhere, i have merely said its wrong to come on, brag, then refuse to share the info. Steve just happens to have done that. If it was Lumpy, AJ, Mick Munro, Lane, or anyone i would be saying the same. That isnt slander, as slander cannot be based on an opinion. I did law at uni Jack, but thanks for that either way. Oh yeah, that and my godfathers son is one of Perths best lawyers. Feel free to sue. Court allows me an open arena to say everything I wish. :rofl:

Nice cut and paste above about the injectors by the way, very informative shame its not your own writing.

I never professed to having the knowledge, but at least im trying to help. Sure means alot then someone who does have the knowledge and refuses to share it. Its very obvious people want to know how this works, why cant we even get a simple explanation?

If you have something as bad to say as you can say on the internet maybe you should pop down sometime and have a say in person like a real man and not some internet ****ing hero.

I cant. Im "banned" - Give me special permission and ill come by.

Just relax, take your pills and calm the **** down, no one wants to hear it. I have always been nice to you no matter what other shit was going on but looking at this, dude your just being a **** head.

The number of pm's professing support for me beg to differ. End of the day my only two issues are this

1- Why use customers as pawns to promote your business without permission and then throw them into a shitfight that they didnt want to be in.

2- Why not share the knowledge - Id rather see 20 Skylines around Aus doing this much power and times, then 2 in Perth and 100 other V8's because sharing the info is refused.

Ill say this again, I would have bagged anyone regardless of who they were if they had of posted in this manner. We are all performance enthusiasts, im sure it would be of great benefit to share the info.

It shouldnt be us versus them (perth vs east) hell it shouldnt be anyone versus anyone in this sort of angry mood. But I havnt been the starter of this.

Like I said id be willing to apologise but whats it going to achieve?

Tom

Expert coments from a guy that cant even change his own plugs or or pads eh tj?

tj works his way around workshops trying to get freebies and when they dont happen when he says this stuff .Tj started the bagging about Hyperdrive calling them Dypercry etc till he needed them so dont fell good about tj being pro hyperdrive Lump unless you keep his freebies up to him.Sour grapes eh tj.

Lets keep the personal attacks out of the thread guys. I think in the interest of diplomacy and maintaining a good forum the guys doing the mud slinging from both sides should delete their posts that contain nothing but 'hate mail'.

Expert coments from a guy that cant even change his own plugs or or pads eh tj?

tj works his way around workshops trying to get freebies and when they dont happen when he says this stuff .Tj started the bagging about Hyperdrive calling them Dypercry etc till he needed them so dont fell good about tj being pro hyperdrive Lump unless you keep his freebies up to him.Sour grapes eh tj.

my how the bullshit flies

1. i happily paid ken for dyno time

2. i go to most shops because thats how i find cars to feature.

3. the rest i wont quantify with an answer. ive got the balls to tell ken to his face the real story.

Me, I'm heading out the door to the workshop to finish making the Stagea air deflector.  Doing work on the car is much more rewarding.;)

I would but my gtr is sitting there in pieces, waiting for my engine builder to finalise all his other obligations first. GRRR!! I might go and sit in it just to remember what it was like ;)

well i think on one thing TJ is right ,we all would like to further our cars and this is the place to do it by sharing information ,i would like to think i practise wot i preech as anyone of my threads would show and i have talked to many very helpful knowledgable people on here and i'm greatfull for that ie sydneykid,wreckedhead,gtrken,lumpy etc etc BUT if you come on here and post something and dont want to share the imfo the only motive i see is for bragging rights and well GROW UP

AND JUST FOR THE RECORD I DONT WANT TO KNOW ABOUT STOCK INJECTORS ITS THE PRINCIPLES THAT SHIT ME (plus i got apexi pfc that can drive large injectors all date long idle to full throddle)

Expert coments from a guy that cant even change his own plugs or or pads eh tj?

tj works his way around workshops trying to get freebies and when they dont happen when he says this stuff .Tj started the bagging about Hyperdrive calling them Dypercry etc till he needed them so dont fell good about tj being pro hyperdrive Lump unless you keep his freebies up to him.Sour grapes eh tj.

Interesting....... We dont give any freebies. Workshop ****s must pay! It's also interesting that people can bag a premesis that they have only ever used for a quick dyno pull or plug swap........I mean that really is a good indication of a shops potential isnt it! Notice to all that I didnt mention any names here. Jeese, now I've started....... :headspin:

This forum has showen the bad side of me and very much so some of you guys and the shops that have been feeding some ppl from WA so they can have their say with out putting their name to their words so i am going to log off SAU for good and thank the many ppl that have sent me support and if those ppl need help they can email me and ill leave you guys to it.

No big loss, entertaining old wive's tales though. Might tell the grandkids one day.

PS... arent you gone already? Ive seen more posts from you since you said this.

JK

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
×
×
  • Create New...