Jump to content
SAU Community

Recommended Posts

Originally posted by adam 32

i had 4 of them in my car when it came over from jap, and i managed to break every A/C vent getting them out. why dont jap car manufacturers just DESIGN CUP HOLDERS!

on that note.. in the R32's, the thing in the centre console behind the gear stick.. is that a cop holder when you pull the flap up and lock it in?

thats the only thing i can think it is.. cans fit ok, but not perfectly.. stupid design if it is though..

Shaun

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

No offense but if any of you have seen "BY BY" which is a UAS car I believe, very few cars are as "JAP" as that.

White, stickers everywhere, GT wing, carbon bonnet, big 18" rims...

btw. I have bronze Rays Volk TE37 Mag Challenge rims coming on my car? Is that too "JAP"?

T.

Originally posted by tlai909

No offense but if any of you have seen "BY BY" which is a UAS car I believe, very few cars are as "JAP" as that.

White, stickers everywhere, GT wing, carbon bonnet, big 18" rims...

btw. I have bronze Rays Volk TE37 Mag Challenge rims coming on my car? Is that too "JAP"?

T.

Pardon me? are you blind mate cos last time i looked i hadnt bought a GT wing for my car.

As for stickers everywhere id love to know how 5 small black decals down my door classifies as "stickers everywhere" - you obviously havent seen GTR80Y :uh-huh: (no offence loz) :(

Originally posted by adam 32

i duno. mine doesnt have a flap.... everyone puts the phones in there in my car

yer same.. but a thing folds up *shrug*.. ill take a pic of it sometime. probably is just a weird cup holder.

Shaun

Originally posted by tlai909

No offense but if any of you have seen "BY BY" which is a UAS car I believe, very few cars are as "JAP" as that.

White, stickers everywhere, GT wing, carbon bonnet, big 18" rims...

btw. I have bronze Rays Volk TE37 Mag Challenge rims coming on my car? Is that too "JAP"?

T.

you say 'jap' like its a bad thing :P

loz is the perfect example of the jap look! :P

gtr80y looks like its going fast even when its parked lol :)

when he was over at my place in the garage of my units, one of my neighbours walked past and went "oooooh going racing are we boys?" :lol:

<rant>

nothing says jap more than a see thru plastic phone holder and matching cup holder jammed into your center a/c vent to the point where the fokin thing crumbles the moment you pull it out and have to wait for years to meet up with OOHSAM to get a replacement one.

Then there's the tissue dispenser thingy in a bamboo box.

And MD/CD Double DIN player with purple (why purple always?) led display.

A pingu thingy somewhere in the car.

Some sort of ioniser thing which creates ozone molecules that bind to smoke particles and neutralises them.

Brace pads on either side of your knees (if youre captain dorifto)

A HKS guage readout thingy in your glovebox which conceals itself when the glovebox is closed (this is very nifty actually, coz u the gauges are there only when u need em)

A Sat-nav thing which again makes no fokin sense except in kanji which sucks coz you can't read anythign but harigana. And the manufacturers never imagined the car ever leaving Japan and don't sell any plugin modules for any other country except korea.

An HKS or Blitz airbox or air filter.

A sticker that says your a member of the Japanese Automobile Community or sumfin (with either 3 to 5 skulls or a dog with a thumb up)

A jap number plate and a authentic Nissan Skyline Jap numberplate surround

A numberplate relocator for the front bumper to allow more air into your FMIC

A emergency toolkit that includes a white flag which you tie between your car and the car towing you or being towed by you so no Japanese men on bikes or on foot try to go between the two fo you.

Oh and the most important one, the Round sticker on windscreen with a big number that tells you what month of what year the car was registered on.

And a couple of other stickers for jap parking permits and automoticve clubs, stickers for every friggen garage that services your car including the local petrol station. And an ETC card to allow you access to something or other jammed way into the recesses of the driver side sun block flappy thingy.

</rant>

oh and if you wanna look dorifto l33t then apply a shitload of bog to the corners of your car, esp the rear corners, don't bother smoothing it out... whack it on and scrape it off in the general angle of the panel.

then apply a shitload of bog to the corners of your car, esp the rear corners, don't bother smoothing it out... whack it on and scrape it off in the general angle of the panel.

did you think of this just now or have you done this before eh :P

when i was in the process of respraying my 180, there was a stage that the whole back half was in pink spray putty, after all the back was straight and i hadnt moved up to the doors yet, the doors forward were black still.

I went through a maccas drive through and it was a classic, the guy said,

"been doing a bit of drifting eh mate?"

i wish i had a pic of all the stages my car has been in, it looked like a jap accident.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...