Jump to content
SAU Community

Recommended Posts

On a stinker of a day this result was achieved:

IMG_0478.JPG

Mods are:

- 3" turbo back exhaust

- hybrid fmic

- pod filter (not enclosed and was sucking alot of hot air)

- bleed valve set to ~11.5psi

I know there will be skeptics, but UAS are a very good workshop and I'm sure alot of people here can vouch for them. The car is incredible to drive and response is magnificent.

The only problem is.... it's addictive I now want ~ 280kw at the wheels haha

Link to comment
https://www.sau.com.au/forums/topic/55961-r33-gtst-dyno-results/
Share on other sites

Yours isn't doing the weird crap mine was doing high up in the rev range too. Series 2 as well yeah?

cause whoa... your car's got some power there. You made about 30rwkw more than my car with the same mods!! Same front mount too, and your intake temp is 10 degrees higher!!!!! :P hehehe

My timing is stock @ 15degrees... How the? what the? LOL :D great result dude. :D

mate what happened to the RUF tune

They only knocked the CAS at a 'guess' to overcome 100kw and get a peak of 169.1kw and didn't bother doing anything else with it.

Today John and the boys at UAS played around with it having around 20 runs on the dyno and thats the figure I achieved, they played around with air flow meters and bleeding off fuel to overcome the too rich problem but the power figure as is now and in road condition is slightly over 200kw.

PowerFC and HKS2530 here I come! :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome Thomas! Sounds like you've made some progress. Are you able to drive it and enjoy it a bit now ? 
    • HUMVEE are fine in big open areas, but they are problematic on the street and tight areas As for reliability, some of the  US Army guys I have chatted with have said that when they were working they were fine, but, the do spend alot of time in workshops for multiple reasons, admittedly, they did get a hard time by the boys and girls who drove them I would definitely put them in the "buyer beware" category  They do look tough as nails though 
    • Just don't use ChatGPT or any other artificial stupidity for the equivalent of googling. Their demonstrated inability to discriminate reality from hallucination should be enough to make them totally untrusted. LLMs don't know anything and cannot think to even the smallest extent. They are just predictors of the next word, and that should never be confused with capability.
    • I think, given the usage model described in the OP, I'd never ever experience the wonders of the 400kW upgrade. What I really need is boost from 2000rpm and probably no more than 260-270rwkW. But I suspect that the highflow is not actually the turbo for that purpose, so I may in fact need to get a G25 or 30 or something right sized and very spooly. We shall see after it is tuned. I've had to back the boost and boost ramp off to stop the thing from pinging since the highflow went on, so I've been almost living the NA life for 9 months now! Injectors are recently in hand. AFM is in hand. Dyno is fixed. Just need to clear a queue of f**king Supras out of the way (and probably fit my new gearbox). So....some time this year? Lol.
    • For what I gather is a Sunday/summer car....braided is fine. You're not going to be left without a vehicle and you have plenty of time for inspection/maintenance. Oof. I wouldn't use them that way. They can probably handle the temperature** but the internal corrugations means that their flow characteristics are a bit shit. Lots of extra friction and pressure loss. Makes them flow like the next pipe size down. ** They are stainless, and the stainless can usually be at least something like 304L, which is pretty good at higher temperatures (unlike 316L, which I would use for a wrt/corrosive environment, but not a particularly hot environment). But the welding needs to be top notch. And even then, because you usually need at least one cone-seat end on them (because you can twist the hose and do up both ends at the same time unless one of them is a union) they can be prone to coming loose with heat cycles.
×
×
  • Create New...