Jump to content
SAU Community

PowerFC ECUs w/ Hand Controllers (NEW & under $1000!)


Recommended Posts

  • Replies 247
  • Created
  • Last Reply

Top Posters In This Topic

I am semi-interested in one for R33 gts-t..

but like somebody said.. they're only ~$60 cheaper than normal R33 GTS-t s1 price (these are cheaper than other models).

Can somebody explain why i should be buying one right now to save $60 (meh) rather than just ordering at any other time?

Why has he removed the PFC + Handcontroller package for R33 advertised on there for $1060 delivered about 2 days ago??

If the one on their advertised is $997.85 (current exchange rate as @ today) WITH handcontroller (?) and delivery (?).. what are we saving?

AP engineering version? hope this dosent apply to me
i got a R32 GTS-T and if i can get one definately put me down for one at that price.

I'd be down for that too

Don't forget to cross these off the list, or in fact anybody on the list with an R32.. as you DO NEED the AP engineering version if you have an R32 GTS-T .. come on - you guys should know that!

Predator: as I said in answer to the same question earlier, its about $100 cheaper than normal for an R33 GTS-t unit by the time you add shipping and use the correct exchange rate. As you mentioned, its cheaper again for other models.

Yes it includes handcontroller and shipping.

No offence, but its not my job to convince you :P

I didn't add the R32 GTS-t guys to the list if you check the first post.

2GU UP 2: It should be ok if its one of these..?:

IMPREZIA GC8/GF8 A-C 92/11-96/8 EJ20G PFC 414-F001 H/C 415-X001

IMPREZIA GC8/GF8 D-E 96/9-98/8 EJ20G PFC 414-F005 H/C 415-X001

IMPREZIA GC8/GF8 F-G 98/9-00/7 EJ20G PFC 414-F003 H/C 415-X001

babs: added, and I will keep in touch via SMS or phone.

As for increasing the size of the group buy, lets just be happy if we get 20 people to pay and worry about extras later :D I will now contact Brent to let him know we have the numbers and get some details as to where we go now

Lucien.

The previous price was around $1050.. with whatever the exchange rate was (its better now).. WITH shipping included AND handcontroller.. That was advertised for nearly 2 months.. .and then about 2 days ago that price was removed :confused:

13_devil: no problems matey. Suspension is much more important.

[[d a n n y]]: Unless its significantly bigger, I doubt it. There is only so much margin that can be taken off these items.

Anyway, I have emailed Brent. I will let everyone know how it goes.

Lucien.

is it too late to get one now????

ummm

just a quick question if anyone can help me with..

what's the deal with having one of these, if my car only has an exhaust, pod..bov?

like basically what imtrying to ask, is there any use of getting one of these if my car is fairly stock?

I was planning to get one of these in the future when i get more mods..but this deal is too tempting to miss....!!sooo thinking about getting one

hey lwells, all the answers that were directed to ferni, does that apply to an R33 Gts-t s2 as they were referring to the GTR?

umm im on stand-by...still weighing up my options and also checking finances, but when you get the exact cut-off date, ill let you know....have to do some further research first

The same basic theory applies. A PowerFC will basically enable you to make the most of any modifications you make to your car and even on fairly stock cars it allows you much finer tuning possibilities such as achieving ~12:1 air/fuel ratios which will likely net you both fuel and power gains. The more your modify, the more useful the PFC gets, so in that sense its 'future-proof'.

I am not trying to convince you or anyone else to purchase: that's entirely up to you. If you do some searching there should be ample threads to help you makeup your mind :P

Lucien.

yup thanks lucien, i posted a thred up on the forced induction section to get some specific and more detailed advantages....hopefully some experts my give me some advice...

but i am leaning towards getting one..so when u no the cut-off date, let us know

thanks

Hi All,

I am currently in the market for a PowerFC and have noticed a couple of other people are, besides which there always seems to be a demand for these units.

With that in mind, who would be interested in a group buy?

I have spoken to Brent @ Nengun -- who a lot of people have bought parts through over the years -- to get an idea of the discount involved.  Here is what he had to say:

Now obviously there are some considerations:

  • We need 20 people.
  • The exchange rate is a determining factor.
  • The offer is only good for one week.

 

The benefits, however, are:

  • The units are $987.75: I have never seen new PFCs w/ hand controllers for <$1000.  That's almost AVC-R money.
  • The price includes individual delivery
  • The items are duty exempt
  • Any PFC except the AP Engineering units (and D-Jetro/Pro too I imagine)

Edit: Re GST Charges, this is what Brent had to say:

So, if you interested and have (or will have) the funds available, please say so and include your preferred model.  I may as well start the list:

Buyers List: -- 23 and counting :(

  • lwells - Skyline R32 GT-R
  • P1E - Skyline R33 S1 GTS-25t
  • Bullant47 - 180SX Red Top SR20
  • Bullant47 -  Skyline R33 GTS-t S2
  • brett33 - Skyline R33 GTS-t(?)
  • gofur - Skyline R33 GTS-t S2
  • mzgtst - Skyline R33 GTS-t S2
  • babia - Skyline R33 GTS-t S1
  • cowie165 - Skyline R32 GT-R
  • SIR-JD - RB25DET S1
  • Craved - Skyline R33 RB25DET S1 (Pro if possible)
  • Nemesis - Skyline R33 GTS-t
  • kasanoff - Skyline R33 GTS-t S1
  • ECL27 - Silvia S15
  • rs73 - Skyline R33 GTS-t S1
  • DrewR33GTR - Skyline R33 GT-R
  • fane - Skyline R33 GTS-t S1
  • Reedy - Skyline R33 GTS-t S2
  • SLYSX - 180SX Blacktop (1994)
  • babbs - Skyline R33 GTS-t S1
  • babbs - Silvia S13 SR20 Redtop (1993)
  • JUN-S15 - Silvia S15 Blacktop (2001)
  • RichyR32GTR - Skyline R32 GT-R
  • 4R33L- Skyline R33 4Door

If you have any questions, post them up.

Lucien.

Ill take 1 count me in, R33 s1 turbo manual

4R33L

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...