Jump to content
SAU Community

**Night Cruise Friday 8/11**

Drift Spec

By Drift Spec,
in South Australia

 Share

Recommended Posts

Drift Spec Community Regular

Drift Spec

Posted
Posted

Hi all,

I am looking at doing a bit of a night cruise this friday, its going to be awesome weather and a nice warm night... good for a bit of light cruising.

It will be the same as our old Friday cruises

Start : 8pm

Depart 8:30pm

From: Anzac Rd Mitre 10 Glenelg

Route either down towards port rd and into the hills, or down south... decide on the night what everyone pref is.

I know it is short notice, hope to see all who can make it.

And Yes I will definity be going to this on :P

Link to comment
https://www.sau.com.au/forums/topic/5626-night-cruise-friday-811/
Share on other sites
GFXman Experienced

GFXman

Posted
Posted

DOH! What shitty timing Drifty :P

Jaffa has his car in at GMH getting the motor re-build done. The Jaffamobile will be off the road for three weeks or so :D

Could take the old VR out for a thrash *shudder* and get left behind :)

Might just have to give it a miss... be plenty more ;)

GFXman

jaffa.gif

whatsisname Grand Master

whatsisname

Posted
Posted
Originally posted by GFXman

Jaffa has his car in at GMH getting the motor re-build done.

GFX,

So the Jaffamobile suffered the dreaded LS1 high oil consumption!? Good to see GMH doing the right thing. It'd be a good time to do a H/C package :P

GFXman Experienced

GFXman

Posted
Posted

Yeah, it's one of the oil consumers. So yep they are fixing it up. However lets just say it isn't just having the rebuild... if you know what i mean... :D

But you didn't hear that from me :P

I'll let him fill you in next time we're out :P

GFXman

jaffa.gif

Drift Spec Community Regular

Drift Spec

Posted
  • Author
Posted

Andy

Will be good to see you there if u can make it... dont worry I will be watching my car for any foreign materials making there way to the rear of it ....no GTR rice for me :)

Sly33

would love to see you make it mate , dont think I have met you yet?

Joolz

Cool mate I cant wait to see it... hey bring you car out instead... nothing wrong with your beast...more the better.

So who else is coming? , I know Nitrate is going , and Bugs hopefully can get a leave pass.... Joel, whatisname? , Dooky?...clint?... what about you guys.

GTR King

Dont worry wont be happening again, just well was out of my contol last time for certain reasons.

Hmm anyone who reads this have a Series II white R33 with a GTR wing and 18" wheels that happened to be down on the Melbourne St last night?...... it took off on the rev limiter all the way down the road.... thats what I like to see :(

whatsisname Grand Master

whatsisname

Posted
Posted
Originally posted by GFXman

Yeah, it's one of the oil consumers. So yep they are fixing it up. However lets just say it isn't just having the rebuild... if you know what i mean... :)

But you didn't hear that from me :)

I'll let him fill you in next time we're out :)

H/C....hmmm nice! May as well while the motor's apart :(

Rob,

Friday sounds good. I'll see how I go?

Out of interest is anyone else going to see JAMIROQUAI on Sat' night? Should be a good night :) :headbang: :headspin: :Party: :singer:

SLY33 Mentor

SLY33

Posted
Posted

drift spec, can you PM me a mobile no. or something?? as its not uncommon for flights to be delayed, i might have to meet you guys on the run.

as it stands the plane should get in at 7.20pm. So by the time i get my luggage, drop it home, quick catch up with the family, and warm up the 'line, i could be cutting it fine :D

Bugalugs Enthusiast

Bugalugs

Posted
Posted

Sly-It usually takes us forever to get going on these cruises cause were all looking and talking about everyones mods they have done since the last time we caught up.

Matt(Whatsisname)-Well,can ya get a leave pass?

Have to park on the road cause of chains that have been put up at Mitre10(no hassle though)

Matt

doglet Enthusiast

doglet

Posted
Posted

I'll come along as I haven't taken my car on a cruise for a while.

whatsisname....I'm going to Jamiroquai on Saturday night. :D Can't wait...:Party:...warm evening....hot venue....good music....:headbang:....lots of ladies...and hopefully.....:boobs:...:cuddle:...:love:....:sperm:....but most probably.....:whackit: hahahahaha

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • Kinkstaah
      From Japan and back to Europe, my sh*tbox R34 GTT

      By Kinkstaah · Posted

      You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
    • Dose Pipe Sutututu
      From Japan and back to Europe, my sh*tbox R34 GTT

      By Dose Pipe Sutututu · Posted

      LOL.... you are correct there.
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      It's been quite the ordeal but hey, at least you figured it out.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
×
×
  • Create New...