Jump to content
SAU Community

Recommended Posts

Well my bad luck continues

I got defected today

Pod or intercooler to be removed, and battery to be secured

The cop was really decent about it, I dont need a roadworthy, I didnt get a fine, and I can drive the car till the 30th and its a minor, not a major

Oh well these things happen

Im seriously thinking about going back to the stock airbox with a panel filter

Link to comment
https://www.sau.com.au/forums/topic/56584-d-d-d-d-d-deeefected/
Share on other sites

I think its because most people who have a POD just have it sitting there without a proper CAI - i assumed the same until i read the post where you said otherwise.

Stock airbox is good :( less defects, power increase from a POD would be so small if at all, so not worth it IMO.

:( your luck is starting to get almost as good as mine back last year when i got defected, EPA'ed and then crashed into in about 2 weeks... lets hope this is not the start of the VIC curse for your car! Better get those voodoo mofos to sacrifice some chickens on your car or something before its too late!

guess its the last week of the month, have to expect the revenue police to be out in force. Pretty much a "why bother" defect though, other than the funds.. the sphincter of the universe munchers!

:( your luck is starting to get almost as good as mine back last year when i got defected, EPA'ed and then crashed into in about 2 weeks... lets hope this is not the start of the VIC curse for your car! Better get those voodoo mofos to sacrifice some chickens on your car or something before its too late!

guess its the last week of the month, have to expect the revenue police to be out in force. Pretty much a "why bother" defect though, other than the funds.. the sphincter of the universe munchers!

true, but he didnt fine me and I dont need a roadworthy...Ill live

but yes I agree

babies will be sacrificed tonite

Horus, I suggest you get yourself an APS CAI. It's just a small pipe extension that juts out from the stock airbox. You need someone to cut a hole for you on the S15 airbox though. The end of the extension goes into the hole where the radiator overflow bottle is located (right hand side looking towards passenger's side). There's a high pressure airflow point there with air coming in from the headlights area. It does wonders, I had one put on my S14, could feel the instant throttle response straightaway. Don't worry, it's the same item for the S14 and S15, even the airboxes are the exact same.

ON hard throttle you'll hear the 'swhooosh' sound but it's still softer then the POD, and it'll keep you out of trouble because it's still using the stock airbox and it isn't exposed.

well how can they defect you for the pod then?

if its proper CAI it should be boxed up, then they cant pin you for it as its in an enclosure

The EPA only allow ONE intake modification. It doesn't matter how legit your CAI is if you have an FMIC.

seems to be the most missed point of this whole thread... dont u people read? ;)

and modifying ur stock box counts as a MOD... so if the cop wanted to be anal u could still be raped if u modified the stock box.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...