Jump to content
SAU Community

Recommended Posts

Brand new front mount intercooler kit with all piping, brackets and adaptors.

Generic Hybrid brand.

Very efficient bar and plate core 600mm x 300 mmx 76 mm

cool down from 125 degree to 29 degree!!!

Comes with all pipes in anodised alloy in blue colour with all the hose clamps, silicon hoses and screws ready to install.

Key features:

High flow

High power handle supported upto 700hp

Big inlet 76mm or 3"

High efficiency big core with internal fins!!

Low pressure drop 0.2psi at 15psi

80 psi tested

Dimensions Details:

Core Length : 24" (600mm)

Core Height: 12" (300mm)

Core Thickness: 3" (76mm)

Inlet Size: 3" o/d (76mm)

Outlet Size: 3" o/d (76mm)

"End to End" Length: 32" (800mm)

Condition:

Some of the fins on one side have some slight bends but none are damaged and all plumbing is in great condition.

It is a cheapy kit compared to some intercoolers but it should function well.

I bought the kit about 4 months ago and have had it stored in a box since. Reason Im selling is because I am getting a custom with larger alloy end tanks as opposed to the cast.

Price = $700 delivered (Australia only)

pics....

http://photos.imageevent.com/kadepunk/skyl...ize/49_1_bb.JPG

http://photos.imageevent.com/kadepunk/skyl...20kit%20001.jpg

http://photos.imageevent.com/kadepunk/skyl...20kit%20002.jpg

http://photos.imageevent.com/kadepunk/skyl...20kit%20003.jpg

http://photos.imageevent.com/kadepunk/skyl...20kit%20004.jpg

http://photos.imageevent.com/kadepunk/skyl...20kit%20005.jpg

http://photos.imageevent.com/kadepunk/skyl...20kit%20006.jpg

http://photos.imageevent.com/kadepunk/skyl...ize/17_1_1_.JPG

http://photos.imageevent.com/kadepunk/skyl...bsize/82_1b.JPG

:cheers:

Guest RedLineGTR

Just wondering are these the ones from ebay??? or something different??

Also could you get some more pics of it, the ones that you have atm don’t give me justification of what it looks like (it just reminds me of some coolers on ebay a while ago).

Sorry dont want to hamper you sale, i myself have money waiting and am very keen on the kit. CHeers Rob

yep these are the same ones from ebay.

heres a link > ebay The bid price is at $750 delivered or the buy it now price is at $850 delivered. coming in from Hong Kong. The one I have available is here ready to be sent.

I bought it about 4 months ago for about $800 and have never used it.

Reason Im selling is because I am getting a custom with larger alloy end tanks as opposed to the cast.

I'll get some more pics up shortly.

:)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...