Jump to content
SAU Community

Recommended Posts

OK thats 10 short shift kits so far. :rolleyes:

Monday (6-12-2004) I will call the last day for this batch becase I know some of you are keen to get the kit installed... I will email everyone on monday.

There is still room for more people. If you want one better get in while its cheap...

  • Replies 69
  • Created
  • Last Reply

Top Posters In This Topic

My mate wants one aswell - so now I'll grab 2 for R33. What is the postage costs for 2?I reckon we'll hit the $110 mark at this rate. 15 now 5 more to go.... :(

At this rate I reckon we will hit the $120 dollar mark... awesome.. Unfortunately I  will have a lot of posting to do :(

I have just notified everyone who was interested. If you have not received an email or PM then PM me so I can send you the details.

Also I have extended the deadline till the end of the week possible early depending on when people get back to me. So if somebody out there still wants a short shift kit let me know. They will be $120 each plus 13 for p&h.

Those that got Rafael's e-mail will now know there is some doubt whether these kits will fit an R32 GTR. I've indicated that I'm not prepared to continue with my purchase unless it can be confirmed that it will fit without problems - is there someone in Brisbane with an R32 GTR and who is planning to buy that can get the situation confirmed one way or another ??.

With the number planning to purchase I don't see why one or two dropping out should make any difference to the final price.

Good Luck.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...