Jump to content
SAU Community

Recommended Posts

hi, thinking about moving the family to the ACT, just wanting to find out what areas have good/bad reputations.

any info appreciated.

p.s. who has good insurance prices in canberra, just got a quote for my R32 GTS4 from suncorp metway and they say that in Chifley (PC 2606) that my car would cost $1500, at moment it costs $700. Is CHifley a good/bad area???

Stephen

Link to comment
https://www.sau.com.au/forums/topic/57498-good-areas-to-live-in-canberra/
Share on other sites

this will hopefully be my field of expertise in a few years, depends on how much you want to spend? if you have a couple of mil you could probably find somewhere fairly civilised.

but canberra in general is quite nice. the better areas are places like Manuka, Forrest, Kingston etc. probably looking to pay around 400k to get into the market in manuka or kingston (i think kingston may have a few crummy parts though, correct me if im wrong?)

somewhere fairly nice and simple would be like gordon, gunghalin or Jerrabomberra (where alot of our members live) its nice, clean and affordable. but obviously it all depends on how much your willing to spend?

if u want your car broken into, move to queanbeyan

but seriously, chifley is ok. its close to woden center. but there are better areas. depends on how much u can afford

kingston doesnt have any crummy areas through it that i know of. looks nicer with the new apartments on the shoreline

Canberra is best for services and education. I beleive it is the best in Australia to raise a family.

Hey - Jerrabomberra is Great. We have a good collection of lines out this way. Prices $300k upwards. No real wankers out his way.

Have a look at a map of Canberra to understand the areas. It's made up of satelite towns. Belconnen (Just sucks), Gungahlin (new but sucks) City (pricey/slummy areas and sucks), Manuka/Kingston (pricey) $500k upwards, Woden (hmmm! Chifley is here and it's a mix), Tuggeranong (newish with new areas going up) $275k upwards.

As Veilside said, in general all of Canberra is good it will boil down to what you want to spend (Rent or Buy) Queanbeyan is cheaper (commonly known as struggle town). Another place down here to avoid is a suburb known as Charnwood. Also stay clear of Kambah.

I'd say anywhere round Tuggeranong for newer places 15years n younger housing.

Take a trip down and have a look round, chat to the natives.

As for insurance I reckon anywhere in Canberra is going to be $1500 upwards. No matter the postcode.

Tuggs is in the middle of no where but, woden is centrel , bleco is not that bad depens on the area, but yes stay away from charnwood and kambarr, shop around well for a house if your looking to buy there are some bargins at the moment

whats wrong with kambah?

well it is regarded as the drugo place of southside i guess + dodgy people hehe well thats the stigmata about it.

it really depends on what you are after

something cheaper but still good eg banks, gordon etc

something cheap and dodgy richardson, kambah

etc etc

ps this is southside only as i know nothing of northside

yeh...what's wrong with kambah!!!!! :)

it rocks!! (i live there, i have to say that heh)

nah i think kambah is a lot better than it used to be when it got a reputation...i've lived here a while and never had a problem - a lot of the dodgy gov housing has been sold off and done up by the new owners.

Stephen, Chifley is fine...anywhere around there is good - Woden's a nice area and close to everything. Curtin would be my pick of the suburbs there (only cos i grew up there :) ). It's an older area and you'll find most houses have huge blocks, but on the downside some places might need a little TLC. Woden Plaza is right at your door, as well as movies/restaurants, and literally over the road is Phillip which has car dealerships, tyre places, hardwear shops etc..

Course not.

Negative in the single digits ain't cold. It's when it goes to _two_ digit negatives.

Canberra's a nice place. Lived/worked there for almost 3 years. Coming from a bigger city, it doesn't matter where you live. Everything is close. It's no more than 20 mins to get to anywhere. Even from one end of town to another. Hell, I spend more time driving into work now in 1 day than I did driving into work for a week in ACT.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So been ocd with timing mark but checked from few angle and seems both cam are on and crank is matching as well to the slot on sump and crank pully   i noticed crankshaft cover has been robbed as per attached pic. Any ideas why? Could my balancer or harmonic be on its way out? should I replace the cover? https://ibb.co/ZR1JFYRR
    • So now doing the change and first time dealing with rb so little nervous giving engine power and potential for screwing it up When you align all marks and then remove crank bolt, timing move little I assume you can put the bolt back in once you have removed the pully to get timing to where you want?   here is pic of my both intake and exchust cam aligned, depending on angle you look they seem to be either aligned or a half tooth or so out. Any thoughts? Should you angle your face and look at each mark that way as if looking straight rather than from above as it can be misleading   <a href="https://ibb.co/ZpnhcvbF"><img src="https://i.ibb.co/HfWrGR9b/IMG-4447.jpg" alt="IMG-4447" border="0"></a> <a href="https://ibb.co/4wm2wn4q"><img src="https://i.ibb.co/JWBqWwr1/IMG-4445.jpg" alt="IMG-4445" border="0"></a>   https://ibb.co/ZpnhcvbF https://ibb.co/4wm2wn4q
    • Thanks for the reply @GTSBoy Haven't really thought of that yet, but you are right. If the hose was damaged it should be absolutely pissing by now. I'll put some heat sleeve around it for good measure since I'm already removing the line anyway.  Maybe I'll put on some of the stock hardlines if I ever fully remove the turbos again. Maybe when T51R modding the compressor housings? Might be a fun mod on GT28s for that "fake single turbo" effect.
    • Update 1: I did some work on the car already before finalizing this post and my "issues" list. I dropped the Tomei exhaust in favor of the HKS Hi Power Silent. Sounds nice and I can actually hear myself think now. Also gives me a realistic chance to legally drive without silencer inserts. A bit of cheating was necessary to still be able to mount the Top Secret style diffuser. Some malusage of washers and a bit of "convincing" toward the brackets and exhaust hanger seemed to do the trick. The shaky steering wheel has been resolved as various suspension components were worn, like sway bar bushings and link bars. Most notably the two steering tie rod ends. Had some trouble finding bushings because my sway bars are not OEM thickness, 23.x up front and 27 rear. But non adjustable, so no aftermarket I suppose. Maybe they are nismo units? Turbo oil drain hoses were definitely still the originals and are new now. Wasn't the cause of the turbo oil leak sadly. Currently removing the rear turbo because of it, I suspect the braided oil feed line is the culprit. This issue needs to be dealt with so I can work towards actually getting the turbo setup legal and inspected. Two new issues to add to the list as well. Rear Main seal is probably leaking. Time will show how bad it is, I don't really want to drop the gearbox right now just for the stupid seal. Could fix a few other things in one go once I do that. Front right driveshaft grease is going past the cv boot, so at some point I'll fix that too.
    • Ok so no 4cyl clutch... Yeah it is a factory manual. So if iam correct i need clutch and flywheel too? I can use something that suits something like R32 GTST?   EDIT: https://www.ebay.com/itm/224291042776 Is this ok?   EDIT2: i maybe forget to mention this(dk how important it is) but the trans will be behind RB25DET NEO(iam doing swap) It will be there for a little while. Iam planing to do bigbox or BMW tranny..
×
×
  • Create New...