Jump to content
SAU Community

Recommended Posts

hi, thinking about moving the family to the ACT, just wanting to find out what areas have good/bad reputations.

any info appreciated.

p.s. who has good insurance prices in canberra, just got a quote for my R32 GTS4 from suncorp metway and they say that in Chifley (PC 2606) that my car would cost $1500, at moment it costs $700. Is CHifley a good/bad area???

Stephen

Link to comment
https://www.sau.com.au/forums/topic/57498-good-areas-to-live-in-canberra/
Share on other sites

this will hopefully be my field of expertise in a few years, depends on how much you want to spend? if you have a couple of mil you could probably find somewhere fairly civilised.

but canberra in general is quite nice. the better areas are places like Manuka, Forrest, Kingston etc. probably looking to pay around 400k to get into the market in manuka or kingston (i think kingston may have a few crummy parts though, correct me if im wrong?)

somewhere fairly nice and simple would be like gordon, gunghalin or Jerrabomberra (where alot of our members live) its nice, clean and affordable. but obviously it all depends on how much your willing to spend?

if u want your car broken into, move to queanbeyan

but seriously, chifley is ok. its close to woden center. but there are better areas. depends on how much u can afford

kingston doesnt have any crummy areas through it that i know of. looks nicer with the new apartments on the shoreline

Canberra is best for services and education. I beleive it is the best in Australia to raise a family.

Hey - Jerrabomberra is Great. We have a good collection of lines out this way. Prices $300k upwards. No real wankers out his way.

Have a look at a map of Canberra to understand the areas. It's made up of satelite towns. Belconnen (Just sucks), Gungahlin (new but sucks) City (pricey/slummy areas and sucks), Manuka/Kingston (pricey) $500k upwards, Woden (hmmm! Chifley is here and it's a mix), Tuggeranong (newish with new areas going up) $275k upwards.

As Veilside said, in general all of Canberra is good it will boil down to what you want to spend (Rent or Buy) Queanbeyan is cheaper (commonly known as struggle town). Another place down here to avoid is a suburb known as Charnwood. Also stay clear of Kambah.

I'd say anywhere round Tuggeranong for newer places 15years n younger housing.

Take a trip down and have a look round, chat to the natives.

As for insurance I reckon anywhere in Canberra is going to be $1500 upwards. No matter the postcode.

Tuggs is in the middle of no where but, woden is centrel , bleco is not that bad depens on the area, but yes stay away from charnwood and kambarr, shop around well for a house if your looking to buy there are some bargins at the moment

whats wrong with kambah?

well it is regarded as the drugo place of southside i guess + dodgy people hehe well thats the stigmata about it.

it really depends on what you are after

something cheaper but still good eg banks, gordon etc

something cheap and dodgy richardson, kambah

etc etc

ps this is southside only as i know nothing of northside

yeh...what's wrong with kambah!!!!! :)

it rocks!! (i live there, i have to say that heh)

nah i think kambah is a lot better than it used to be when it got a reputation...i've lived here a while and never had a problem - a lot of the dodgy gov housing has been sold off and done up by the new owners.

Stephen, Chifley is fine...anywhere around there is good - Woden's a nice area and close to everything. Curtin would be my pick of the suburbs there (only cos i grew up there :) ). It's an older area and you'll find most houses have huge blocks, but on the downside some places might need a little TLC. Woden Plaza is right at your door, as well as movies/restaurants, and literally over the road is Phillip which has car dealerships, tyre places, hardwear shops etc..

Course not.

Negative in the single digits ain't cold. It's when it goes to _two_ digit negatives.

Canberra's a nice place. Lived/worked there for almost 3 years. Coming from a bigger city, it doesn't matter where you live. Everything is close. It's no more than 20 mins to get to anywhere. Even from one end of town to another. Hell, I spend more time driving into work now in 1 day than I did driving into work for a week in ACT.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • (it is a brand new ported mellings pump) I suspect the lack of pressure is due to the leak. It was *not* that low in other logs of oil pressure in the past. It wasn't that hot either, but not far off.
    • Would a Mellings oil pump be a viable option  From my time with a LS, and talking to tuners and LS specialists, the "weak" OEM oil pump is one of the first things they recommend to swap out if I was going to give the engine any high RPM I opted for a Mellings high volume, with the high pressure springs and I never had a issue with it Cost wise they are not expensive in the scheme of things 
    • Just bought a 2002 Stagea 250tRS VR-X Four AERO VQ25DET and spent the last two weekends cleaning and detailing it.. still have to do the wheels and the engine bay but the rest of it came up nice. Imported 2011 to S.A. and I'm the third owner since it was imported. I met the guy who brought it over, he went to Japan and picked out the car, bought it and ordered the wheels. He also gave me a list of stuff he did to the car with receipts. Coil overs (I have the original springs), 3" exhaust from the dump pipe back no cat, Custom dump pipe,(I have the original exhaust), Plenum spacer, 18" custom Work XSA wheels (need restoring, I've made a start..), Shift kit put through the 5 speed tiptronic auto, TV and menus/screens changed to english, Australian DTV tuner installed in rear. I've just had four new discs and new pads as well as all the fluids including the brake fluid replaced. I have all the receipts for the last 15 years and the import papers in a nice folder. Car looks great, goes like hell but fuel economy is not a thing lol.. pics next..
    • I ended up in this rut again lol, and used a shit ton of filler. One thing I can't understand is, even after using a big long block and going in long X pattern strokes, I always end up at bare metal again with no filler, and my repair started at one end of the door and now I've chased my tail to almost the other end of the door. I was thinking of hitting the panel with a hammer where it might be a high spot and making everything low then filling it, I did this on a small section on my other door by mistake and I think I fixed it lol. Is this a bad idea? The other thing is with guidecoat, whether it's the powder or spray, after I sand all the guide coat off, it doesn't reveal anything for me in terms of high spots and low spots and makes it especially hard when it's bare metal (at least in powdered form), am I doing something wrong here, or likely a high spot I keep going over and creating valleys? Lastly, stupid question but, is it possible that after sanding if I only sand over the filler area where I know to be a dent that it's impossible for me to dig into that dent? Unless there are other problems which I missed.  
×
×
  • Create New...