Jump to content
SAU Community

Recommended Posts

sorry if it sounds like a stupid q, but can't you get that sort of power out of your gtr without an ecu upgrade? or do you want it for other reasons, ie saftey of motor?

na not a stupid questions at all i rekon its very possible to get that power with a stock ecu but id like to know if its worth the money to upgrade the ecu for the reason you said safety plus,idle,driveability etc

Just wondering what you guys are using or would recommend..

The car is going to be used for street use only with the idea to run 200-250kw @ the wheels..

Personally ive heard the Power Fc is the way to go?

Any comments would be appericiated.

Power FC is the way to go. Trust me when you have "200-250kw" for a while, you will want more....then a little bit more...then just squeeze some low mounts in there......and so on, and so on.

Stock ecu may cope. Power FC all the way. Do it once, do it right.

If your only going for that much power just get the standard chip remapped.

thats where it get tricky caus a chips is say $800-900..

aiming for 240kw@wheels..

but say i plan to keep the car for a while longer and I have the cash for a turbo up grade later on il most liklely need a computer uprgade? Correct

Power FC is the way to go. Trust me when you have "200-250kw" for a while, you will want more....then a little bit more...then just squeeze some low mounts in there......and so on, and so on.

Stock ecu may cope. Power FC all the way. Do it once, do it right.

I think you are getting my drift now, i have had the car for about a year and a half and ive just cleaned it up to my liking..

Id rather do it once as you say because you just end up spending twice too many times...

I got a R32 GTR with just under 250kw's at the wheels, currently running a tuned Power FC. Extremely happy with it, made a big improvement. Best thing is, that basically anymore performance upgrades I do, is totally within the power FC's limits :(

I got a R32 GTR with just under 250kw's at the wheels, currently running a tuned Power FC. Extremely happy with it, made a big improvement. Best thing is, that basically anymore performance upgrades I do, is totally within the power FC's limits :)

What other mods have you done to your car?

Totally agree about the potential of the power fc thats why i wouldnt rush out and get just a chip..

The only prob i believe is the pfc is not plug in and its pretty expensive to tune..

What other mods have you done to your car?

Totally agree about the potential of the power fc thats why i wouldnt rush out and get just a chip..

The only prob i believe is the pfc is not plug in and its pretty expensive to tune..

Power FC is definitely Plug in!

Other mods are..

HKS front pipes

Trust cat back exhaust

'Steel Wheel' stock turbo's

Apexi pod filters

HKS cam gears

11.5psi made 220 rwkw's and 14psi made 248rwkw's.

And I disagree with the power Fc being expensive to tune. BUT it does all depend on who you take it too AND what mods you have.

Power FC is definitely Plug in!

Other mods are..

HKS front pipes

Trust cat back exhaust

'Steel Wheel' stock turbo's

Apexi pod filters

HKS cam gears

11.5psi made 220 rwkw's and 14psi made 248rwkw's.

And I disagree with the power Fc being expensive to tune. BUT it does all depend on who you take it too AND what mods you have.

Hi there;

this is exactly the type of build I'm going to do and the bost level I'm wanting to run with the exception that I have N1s. can I ask where you got it tuned please?

Power FC is definitely Plug in!

Other mods are..

HKS front pipes

Trust cat back exhaust

'Steel Wheel' stock turbo's

Apexi pod filters

HKS cam gears

11.5psi made 220 rwkw's and 14psi made 248rwkw's.

And I disagree with the power Fc being expensive to tune. BUT it does all depend on who you take it too AND what mods you have.

Once again thanks heaps for the info!

I have been quoted around $600-700 to get the Power Fc and tuned?

Do you thinks that is around the mark..

Yeah, I can't believe PFC with tune =$600-700 too, that's more likely is the price for the remap chip + tune. PFC is good, but Motec is much better.

sorry guys my mistake around $400 to get it tuned and around hopefully around $1200-1400 for the pfc...

Know anyone thats sells them cheaper???

Nengun / Greenline will be the cheapest you will find (new).  

If that is too much then try and source yourself a second hand FC, but even then, they wont be all that much cheaper.

i have got a quote of brent@ nengun $850 my only concen ordering direct out of japan is warranty side of things?? Has anyone ordered out direct out of japan??

Any one have a web page for Greenline is he in Aus?

$850 would be without the hand controller. Warranty shouldn't be an issue. If you have a problem just send it back and he should sort it out. He is pretty good like that....

Greenline is in Japan also. www.greenline.jp

Im waiting on a price from a mates workshop if its too expensive il most likely go throught brent..

Do you think i should buy it with a hand controller, ive managed to finda few places in melb that have a hand controller to tune it?

Why spend the money now??? What mods does your car have? to give you an example, my car made 230rwkw on 10psi. Stock ECU, AFM's, pump, injectors, turbos, I/C. Aftermarket pods, front pipes, 3inch exhaust.

If I were you I would stick with the stock ECU UNTIL you are ready to upgrade the parts that require a different ECU (being injectors, AFM's, Turbos). That is what I am doing. I'll be getting the PFC once I upgrade a few parts.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...