Jump to content
SAU Community

Recommended Posts

Anyone had any problems ?

I parked my car today next too a bunch of hill billies getting into a rusty old magna and went into the shop for 5 minutes when i came back there was a dirty big golly running from the top of the passenger side window all the way down to the side skirts.

I dont understand how these jelous assholes can just do that to peoples nice cars.

Oh and they banged the trolley on the rear of my car and left it there.

Straight to car lovers to wash it off.. was late back to work from lunch..

What can you do ?

Totally friggin sad if you ask me.

:):rolleyes:;) ;)

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

Hell, I park my car opportunely all the time..

Next to a concrete pole - Only ONE numbnut that can dent your car

Next to a disabled bay - AMPLE clearance on one side.

In a single spot between two concrete colums (underground)

Right at the END of the carpark, next to a kerb -- One numbnut equation again

or If i'm going to sticksville, i'll park in 2 spaces on purpose. especially if there's SHITBOX cars either side..

just my tips :)

Originally posted by GR33DyMANGO

u should try and park it where there arent as many cars, which is usually further from the entrance to the shopping centre, so u have to walk a bit further..... prolly worth it though.

Yup couldn't agree with ya more! i park my car and the far end of the shopping centre where there are hardly any other cars stupid enough to park... then i also take up to car bays... i know that this is annoying for shoppers but i only do it in places where there are NO other cars around...so no one can complain then...

Unfortunately though sometimes we have to park next to crappy cars who don't give a rats about ours... it's inevitable.. i just wish people would respect our cars a bit more thats all....

Guest GR33DyMANGO

hhHAHhaa.. wtf?????? i dunno about u guys but i sorta bought my car so i dont have to walk places. ie the shopping centre. uve got 2 b practical.

Unfortunately though sometimes we have to park next to crappy cars who don't give a rats about ours... it's inevitable.. i just wish people would respect our cars a bit more thats all....

yer couldnt agree with u more. its the same as that guy who stole all the performance cars in perth. they dont have any respect for our cars because they;ve never worked hard enough to understand what we went through to get it. ;)

Even though I hate the risk of shopping centres, I would advise against taking up 2 spots unless the car park was nearly empty. Reason being it pisses people off, and they would be more inclined to key your car.

Just follow all the other suggestions, ie find spots where you are less likely to get hit, ie far from the entrance, and nowhere near the trolley return bay or any stray trolleys. Sure someone could just wheel their trolley up and hit your car with it anyway but your chances of being hit are massively increased even if there is one stray trolley nearby (whether by accident or on purpose).

Originally posted by Timmy G

But if your car is out of sight, wouldn't it make it more appealing for theives and people to vandalise your car?

That's too far away ;)

A happy medium needs to be struck. You just have to use your spider sense in car parks and figure out where the lowest risk areas are. Touch wood mine has worked very well so far. (touch wood again!)

Originally posted by BY BY

Parking a skyline at a shopping centre?

NEVER

I cannot agree with you more... kind of eliminates the problem.

Unless you want it to be scratched, stolen, or vandilised, don't take a chance... secure parking all the way.

Duncan also has a good point ;)

Hmmm,

I don't like parking my Line at Shopping Centres either - But take a different approach to you guys.

I park as close as I can to the entrance of shopping centres, where there are lots of people walking though. Must be very well lit. I do this so my car is in full view of everyone. I also look for security cameras and where the guards are patroling. I make a point of turning my alarm on in from on everyone.

I DONT like parking far away from other cars as it would increase the chance of getting it pinched. (ie easy for no-one to notice or see)

I also watch our for people/groups who are scoping my Line - if I see them, I'm gone. They maybe just admiring, but who can take the risk.

If all else fails, take Nick's advice - Don't even go there !!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The attached document is fine. I just downloaded & opened it.
    • Hello, sorry for being late to join the discussion, but my clock just died on me.   Ive tried to look at Michaels digital clock repair.docx and it doesnt work maybe the file has expired.   Please let me know if you can re upload it or take some youtube videos to show us how to get the clock installed? thanks
    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
×
×
  • Create New...