Jump to content
SAU Community

Recommended Posts

Hey guys,

I bought some spitfire ignition coils from nengun, gave them to my tuner to chuck in, and they fit just fine.

Probelm is they dont fire, then with the terminals swapped over they just contiunously arc.

I know there is different packs for S1 and S2 R33 Lines, but my car is definately a series 1, although the ignition setup looks different to my mates s1 93 model (mine is 95).

Is there a way to find out FOR sure if my motor is a S1 or S2, (either visually or on the compliance plate?)and what are the odds of being able to make the coilpacks work in my motor if indeed is a S2.

I bought the S1 packs.

Any feed back greatly appreciated cheers.

Link to comment
https://www.sau.com.au/forums/topic/58197-spitfire-coil-pack-issue/
Share on other sites

Nah thats the thing thats different its not there on mine but is on my mates, just did a bit of browsing at http://www.perfectrun.com.au/performance%2...systemframe.htm, according to that i shoudld have the 005 coils, i have the 001's. Is there anyway I can change to an igniter pack to get them to work, i cant imagine the head ache of trying to send them back to Japan?

Sweet ok, where can I get one of these modules? I live in sydney. Any instructions you could give me would be really helpful.

BTW cant send em back, cause the guy from nengun actually emailed me to ask me what series motor I had, he was too helpful, I couldnt shaft the bloke now.

Umm EDIT : not running stock ECU am running EMS stinger.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...