Jump to content
SAU Community

Recommended Posts

hi im trying to get a graph up... umm the tuner reckoned he couldnt stop it knocking at 18psi no matter wat he did... thats y its only 16, thats weired aye.. its alittle laggy

Well id be inclined to run a Bosch fuel pump, and run the std manifold. Pinging at 18psi seems a little strange...did he suggest the reson why it was pinging..

he said i should get some plugs a heat range colder...

are u talking about a standard exhaust manifold?

they just cheap weld n grind cams, standard cam gears..

a strange thing is the cas if nearly fully turned anti clockwise (Advanced?)

I would most definitely be checking the cam timing. Ensure it has been setup correctly and then drop a set of adj cam gears on it and see how u go.

How is the power curve when it wants to ping? Does it want to only ping at a certian rpm range? i.e in my case 4000rpm

I have had valve float issues where i bumped boost up and it would always want to ping at 4000rpm + the power curve would go flat from then onwards.

The last I highly doubt. But a few things to look at.

Hey RB power...what is your car like to drive on the streets?

tail happy?

Do you have any suspension/brake mods to match, 238rwkw is alot to stop with standard brakes :woot::blink:

Edited by bigtim11
just quickly....

whats everyone got their rev limiter set at??

since i got the highflow and having full boost at 4000rpm i hit the rev limiter alot!!!

i just dont feel power loss to change gear

street, 6800rpm

track 7500rpm

roy uses a nice rev limit

just quickly....

whats everyone got their rev limiter set at??

since i got the highflow and having full boost at 4000rpm i hit the rev limiter alot!!!

i just dont feel power loss to change gear

LOL...i keep mine at around 8,300rpm. I dont rev 3rd and 4th that hard, but i sure do rev 1st and 2nd gear out to make sure that when i grab the next cog i have as many revs on board as possible. The difference between 4,000rpm and 5,000rpm on my engine is proabably about 100rwkws so worth revving out the lower gears to fall into the meat of the power curve

If your turbo can flow the air, the std cams dotn seem to fall off too abruptly....mine still feels as though its pullign pretty well at 8,000rpm. i thnk it makes about 210rwkws at thoe revs?!?!?!

got the same problem as roy, need to keep the revs nice and high to bypass the lag. mines set at 7500 and is still climbing rather well. cams would definately help but might look at raising it another 300 or so.

i was revving to 8.5 on the old motor before she went.

proly will take the rebuild to a max of 8.3, but this time round with uprated oilpump and valve springs to suit.

gotta remember that rb20's are short oil drive motors so the posibility to destroy the oil pump is very good at high rpms/hp.

Hey RB power...what is your car like to drive on the streets?

tail happy?

Do you have any suspension/brake mods to match, 238rwkw is alot to stop with standard brakes :O:)

hey it seams to be ok alittle loose...lol....stock brakes and suspension apart from lowered springs and drift pinapples lol

my revs are set a 7000 rpm

i was revving to 8.5 on the old motor before she went.

proly will take the rebuild to a max of 8.3, but this time round with uprated oilpump and valve springs to suit.

gotta remember that rb20's are short oil drive motors so the posibility to destroy the oil pump is very good at high rpms/hp.

what year was car? and how many km had it done before it let go?

also, were u driving it everyday at 8000+rpm?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That is surely the biggest gathering of Stageas in North America, ever!
    • Remember kids - if you can't afford to buy 2 GTRs......
    • I know people cry at the price of the Getrag 12-14k for a conversion now, but it really is a nice mid point. Not going to get change from 10k on a gearset installed.  $30k++ for sequential.   I know you run the risk of a damaged used one and parts are hard to get but as a street car gearbox its really hard to beat. If you enjoy a more traditional manual, its the choice no question.     
    • Time to decide what’s more import, your power level or your budget because you’re going to struggle to keep both 
    • Our Southern Highlands Cruise is proudly registered with “R U OK?” Day.  Sometimes the best way to check in on your mates is by getting out for a drive together. Sharing a common passion like cars creates the perfect space to chat, connect, and support each other.  A simple “R U OK?” can make all the difference. Let's enjoy the drive, the company, and look out for one another. PLEASE WEAR YELLOW FOR “R U OK?” DAY Sunday 14th September 2025 9:30AM Meeting Crossroads Homemaker Centre 10:00AM Cruise Departure Via Old Hume Hwy 11:45AM Arrival at Mittagong RSL Club Meet Location: Crossroads Homemaker Centre Final Destination: Mittagong RSL Club *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...