Jump to content
SAU Community

Recommended Posts

hi im trying to get a graph up... umm the tuner reckoned he couldnt stop it knocking at 18psi no matter wat he did... thats y its only 16, thats weired aye.. its alittle laggy

Well id be inclined to run a Bosch fuel pump, and run the std manifold. Pinging at 18psi seems a little strange...did he suggest the reson why it was pinging..

he said i should get some plugs a heat range colder...

are u talking about a standard exhaust manifold?

they just cheap weld n grind cams, standard cam gears..

a strange thing is the cas if nearly fully turned anti clockwise (Advanced?)

I would most definitely be checking the cam timing. Ensure it has been setup correctly and then drop a set of adj cam gears on it and see how u go.

How is the power curve when it wants to ping? Does it want to only ping at a certian rpm range? i.e in my case 4000rpm

I have had valve float issues where i bumped boost up and it would always want to ping at 4000rpm + the power curve would go flat from then onwards.

The last I highly doubt. But a few things to look at.

Hey RB power...what is your car like to drive on the streets?

tail happy?

Do you have any suspension/brake mods to match, 238rwkw is alot to stop with standard brakes :woot::blink:

Edited by bigtim11
just quickly....

whats everyone got their rev limiter set at??

since i got the highflow and having full boost at 4000rpm i hit the rev limiter alot!!!

i just dont feel power loss to change gear

street, 6800rpm

track 7500rpm

roy uses a nice rev limit

just quickly....

whats everyone got their rev limiter set at??

since i got the highflow and having full boost at 4000rpm i hit the rev limiter alot!!!

i just dont feel power loss to change gear

LOL...i keep mine at around 8,300rpm. I dont rev 3rd and 4th that hard, but i sure do rev 1st and 2nd gear out to make sure that when i grab the next cog i have as many revs on board as possible. The difference between 4,000rpm and 5,000rpm on my engine is proabably about 100rwkws so worth revving out the lower gears to fall into the meat of the power curve

If your turbo can flow the air, the std cams dotn seem to fall off too abruptly....mine still feels as though its pullign pretty well at 8,000rpm. i thnk it makes about 210rwkws at thoe revs?!?!?!

got the same problem as roy, need to keep the revs nice and high to bypass the lag. mines set at 7500 and is still climbing rather well. cams would definately help but might look at raising it another 300 or so.

i was revving to 8.5 on the old motor before she went.

proly will take the rebuild to a max of 8.3, but this time round with uprated oilpump and valve springs to suit.

gotta remember that rb20's are short oil drive motors so the posibility to destroy the oil pump is very good at high rpms/hp.

Hey RB power...what is your car like to drive on the streets?

tail happy?

Do you have any suspension/brake mods to match, 238rwkw is alot to stop with standard brakes :O:)

hey it seams to be ok alittle loose...lol....stock brakes and suspension apart from lowered springs and drift pinapples lol

my revs are set a 7000 rpm

i was revving to 8.5 on the old motor before she went.

proly will take the rebuild to a max of 8.3, but this time round with uprated oilpump and valve springs to suit.

gotta remember that rb20's are short oil drive motors so the posibility to destroy the oil pump is very good at high rpms/hp.

what year was car? and how many km had it done before it let go?

also, were u driving it everyday at 8000+rpm?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...