Jump to content
SAU Community

Recommended Posts

  • Replies 86
  • Created
  • Last Reply

Top Posters In This Topic

Originally posted by osc@r

Firstly...

Rev210...  lol  I almost forgot about that.. we got chewed out by that cop good and proper huh..  well we were doing just a tad over the limit.

I'm thinking the reading is a bit high, as a month or two earlier, same mods except 14 psi, i got 219 at Fuel Inj Services, in Belmont.    who knows..?

Yes, we did get an ear bashing. What was he talking about anyway?

219rwhp sounds about right for the car, you don't need much to go quick in the s13's and thats enough power to run 13s easy in your car.

Guys, its simple really. If you want feel good #'s so you think you have a big HP monster, go to Myaree Dyno, if you want the most accurate # you can really get go to Genie(because u can only turn a 3 ton concrete roller so fast). If you want good basis # that you can compare with pretty much rest of australia(which id a Dyno Dynamic dyno #) then go to PSi or Formaz... and both have a 4wd dyno. Or if you want something special go to Speedworks for the Dynapack dyno(but involves taking rims off and lotsa work etc)

SST Anyone ??

They looked after the Silvia WA guys.

I went to a dyno day at PSI and they boosted my car WITHOUT asking me. They boosted it no less with a t piece tube. Then to add insult to injury left the t-piece on my car WITHOUT telling me. I drove off and the car was overboosting. Pulled up and discovered the T-Piece.

Go to PSI if you guys want but it is at your own perril ........

SST dyno reads the same as PSI anyhow .... REAL FIGURES.

Oh and another thing, we almost died watchin the dyno runs at PSI. PSI has no extractor fan and the workshop filled with exhaust fumes. Cough Cough :(

The screen was excellent though. Were ever u go, orginise that !!

Originally posted by Butters

Oh and another thing, we almost died watchin the dyno runs at PSI. PSI has no extractor fan and the workshop filled with exhaust fumes.  Cough Cough :(  

should be HAD no fan.

It was pretty bad though. Not only is it well ventilated now, but they have actually moved to diff location. And newer Dyno.. (as mentioned)

Summoner.. i actually went to Myaree cause it was the only one that i could book at an hours notice, was cheap (50 bucks for three runs).. and he printed the A/F ratio on the dyno sheet, so i could see that i wasn't leaning out too much in the top end.

I needed to know the a/f before i took it down to the Plex that night and thrashed the hell out of it.

but.... that said, to anyone who didn't know better, it does bring a smile to ya face.

righto

Rob u call and organise for a mid december weekend day at speedworks.

post a new thread in events when u have all your details and we'll start taking names.

if you say your in and forget to show without a valid reason poor form and it makes it alot harder for us to sort these things in the future as a poor turn out, after much hype from the guy organising it can get the tune shops off side.

also we can organise another in late janurary as that date sounds like it suited the other two shops anyway.

settled after rob has details posted i'm closing this thread.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
    • After @Kinkstaah debacle, I'd never want to try and get it right 😛
    • The hood lines up with the fenders. The front bar doesn't perfectly line up with the fenders where the wheel arch is. You have to 'squeeze' the front bar 'in' as it wants to naturally flare out and be longer on the sides. There's a few threads where people notice this when they only swap a GTR style bumper and front bar. Unless you have genuine OEM items - you may be better served getting conversion kits. There are GTT bumpers to fit GTR hoods. There are GTR hoods (non genuine) to fit the GTT bracketry. MAY  
×
×
  • Create New...