Jump to content
SAU Community

Recommended Posts

Hey guys,

I want to get custom plates on my upcoming R33, I don't like the standard full size WA plates at the back or the front (too ghey)

To anyone that has custom plates, what size do you have ?

I understand there is 1/4 size, 1/2 size, 3/14 size and normal size..

I'm thinkin of getting 1/4size at the front, and 3/4 size at the rear. this sound about right ?

-Kym

Link to comment
https://www.sau.com.au/forums/topic/5937-custom-plates-on-r33-size/
Share on other sites

Ahh dont wanna let the wind outta ure sails but imho these are some bad points with personal pl8s.

1/ ppl recognise the car wether its good guys (cops) or bad guys (theives) ure better off remaining anonymous.

2/ they (like everything) cost money which could be put to better use under the bonnet.

3/ U run the risk of gettin the pl8s i had planned:lol:

my $0.02

Not entirely true.

You can have slimline at the back, you just have to make up a plate which covers the massive space left there and also to cover the big nut which holds the rear bar on. Have a look at mine next time you see me (bring on the next crooze!) to see what the hell i'm talking about.

Cheers!

Dave

I don't know what the story with the sticker type number plates are. I know that in order to get 3/4 size or 1/2 size plates you can only have a certain number of charaters on your plate. Mine had too many thus had to pay maximum $$ for polycarbonate as well.

Boostzor: Nope, wasn't me in Kings Park. Sorry. I was totally asleep at that time! :P

Strich9: I know it's not 100% official but is that car from Melville Auto Imports? Think I saw one line it there when I drove past the other day.

Cheers all :)

Dave

If you get the slimline ones at the front and normal at the back - does the rear one use the same letters as the front and what colours is it?

I was looking at getting the $110 slimline (the one where you dont get to choose the letters) so I get a slim plate up front to minimise airflow disruption to the intercooler, but the fullsize plate would look better at the back, depending on the style.

Or is it a full custom choice to get the slimline and fullsize plate (eg expensive) ?

Ta

Conrad

Guest GR33DyMANGO

i ordered some plates a few weeks ago. this is what i understood.

u can get those slimline plates for 110 or so bucks but they choose the letters. both plates are slimline.

or u can u the slimline plate where u can choose 2 numbers and 2 letters. both plates are slimline.

or u can get custom plates for 275 bucks(steel). u can choose the colour and size. there are about 14 different colours to choose from. front and back plates can be different sizes.

u can track down the wa licensing centre online to get all the details. i think i searched "custom plates wa."

hope that can help.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kinkstah, no, coilovers aren't illegal, especially as a bolt straight in. The illegal part will be if they're altering suspension geometry beyond factory limits, or the ride height is not legal.   Sounds like the blue slipper just didn't want to deal with any later possibility of mods appearing on the car.
    • The problem has always been that coilovers are able to be adjusted, almost at any time, to be too low. Most people who ever get/got defected for/with coilovers were actually afoul of the minimum ride height rule. So the interpretation by cops/inspectors was always that it is pointless to allow numpty to raise his coilovers and get the car inspected/cleared, then just drop them back down again as soon as they get around the corner from the inspection station.  This led to the interpretation that they were illegal unless rendered such that they can't be adjusted (ie, collars welded to the body, that sort of thing). That may or may not have ever actually been the official line, but I'm pretty sure it's not considered to be a solution these days. Coilovers themselves fall under clause 3.2 b of that manual, because they are an "installation of a variable ride height system" and they don't fit the exclusions in that clause (which point to air springs and other pneumatic adjusters). So, as per previous statements, they require engineering cert to be legal on the road. Once you have such cert, provided you do not adjust them outside the height range covered by the cert, you are OK. Without, you have an unroadworthy vehicle.
    • Here E10 is the cheapest fuel. And general advice is to not use it unless you hate your car. From what I remember it clogs up stuff in the fuel system or injectors?  With US/Canada being E10 across the board, does that mean that all fuel there is terrible?
    • Sorry, are coilovers ACTUALLY ILLEGAL in NSW? They aren't in Vic, as long as they retain 70% of stock travel and the car is above 100mm off the ground. Does NSW actually have a law making coilovers actually illegal? RWC/Blue Slip/Engineering people not knowing the actual f**king laws boils my blood. Demand them to point to the documentation that states a coilover is illegal. (it may exist in NSW ) Edit: I checked. They aren't. https://www.nsw.gov.au/sites/default/files/2021-02/RMS-infosheet-light-vehicle-modifications-manual-suspension-and-ride-height.pdf
×
×
  • Create New...