Jump to content
SAU Community

Recommended Posts

If you think Oz is unselfish at $10m at first place, U.K. donated $2.1m for 68 million ppl...

even in pounds thats pathetic.

glad to see australia has stepped it up to 35m

Yeah I got some family in Malaysia as well, but they are all ok. Hope everything starts getting better, a lot of ppl affected in many diff. countries.

Glad to hear that Nick. I got family in Penang but thankfully they all live in Georgetown and to the east. As an aside, one of my cousins was New York during S11 and survived; I think we're a pretty lucky bunch!

Good to see Australia more than tripled their original amount; still waiting on the tight-fisted US though...

go norway!!

One measure by the Paris-based Organisation for Economic Cooperation and Development shows that none of the world's richest countries donated even 1 per cent of its gross national income. The highest, as of April, was Norway, at 0.92 per cent; the lowest was the United States, at 0.14 per cent.

Looks like we're all doing our bit at least- apparently Australians have donated nearly $1million each day since the start of the disaster. CARE Australia got some cash from us but there are lots of worthy charities collecting.

UN is putting together a global pledge of $2.5 billion from 40 countries in the World Bank.

Japan is single biggest contributor!

hmm :D, num of recoverd bodies are officialy up to 123,100, thats around 80,000+ in indonesia and around 28,000+ in Sri Lanka. we donated so much of clothing and money to Sri Lanka (sorry if i am too on to Sri Lanka, but thats where i am from). :). but im glad none of the people back in sri lanka i knw is hurt.

The geological cause of the earthquake is plain: Indonesia has long been plagued by earthquakes and the volcanoes that usually attend such massive fissures in the earth. Giant plates bearing India and Australia have been moving north for millenniums, colliding with the Eurasian landmass near Indonesia. As a result of the immense pressure that was built up, the southern plate is dug like a bulldozer blade under the northern plate.

When that happened, pressure that had accumulated for years or decades was released in an instant. As the earth convulsed, the ocean floor probably fell rapidly in some places and rose elsewhere along a fissure hundreds of miles in length. Areas that collapsed saw tons of water plunge in, causing what is known as a depression wave. Elsewhere, the ocean floor reared up, causing water to be displaced -- an elevation wave. It is likely that both effects fed the tsunamis.

Think of a kid's plastic swimming pool and sliding your hand underneath -- pushing up on the plastic. It would cause a wave to spread throughout the pool. That's what happens on the ocean floor after an earthquake.

24712004_Indonesia_Tsunami.gif

This gives you and good idea of who was hit and how bad.

globe-plates.GIF

This shows the concentration of earthquakes around the world. You can see the outlines of the plates and if you look up in the Indian you can see exaclty where it was.

plates.gif

And last a map of the plates

Next week we'll learn about why the sky is blue kiddies :P

I am Sri lankan as well and thankfully none of our remaining relatives over there were hurt. My mums cousin had a there house washed away and are living in temporary accomodation - My grandmother is going back there this month and she will be helping with the aid relief, we are sending clothes and other items and giving donations as well.

I dunno if this is a good idea - but over here while I was in Perth we had a "tsunami cruise" where over 300 cars rocked up to and ppl gave donations for a map. It was a great success and they made around 3500 dollars - this was after only 4 days notice!!! I think a donation cruise would be a good idea, the police im sure wudnt mind ppl cruising for charity - but it wud be a great idea!

let us know what u think

Regards

Kim

I was in lanka from the 23rd and just came back yesterday.

For those that know Lanka I was heading to Gaul, which is on the south coast of Lanka on the same day the tidal wave hit but luckly we managed to escape it all as we left 1 hour late and we got stopped half way there as there was water coming onto the coastal road. This was before the 2 main waves hit. We then knew something was weird was going on so we managed to find a inland road out of the coastal area about 30 mins before the 2 waves wiped out the areas we were driving through. We didnt know how bad it was until we got home and watched the news on tv.

So many people in Lanka died as when the water and sea started rising before the 2 waves hit everyone was running to the beach to see what was happening as they had not seen anything like that before. There were people standing and watching the canals and bridges near the coast also filling up before the waves hit, and they would all not have had a chance once the waves came.

It was a scary thing to witness first hand as everyone was running around on the roads and cars buses etc we also driving around everywhere.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Are you suggesting that the kit did a cheap and nasty job of just jamming the wheel in between other things and caused the misalignment? I mean, we normally do this with an integrated crank trigger wheel, not something bodged on. It's not 1995 any more.
    • I mean, given the number of BMWs you own their tolerance for improper torque is rather low. The number of torque + angle spec bolts and non-reusable bolts in one is nuts.
    • Atmospheric vent requires something that doesn't use a MAF for load. You would need a standalone ECU for that.
    • Hey all,   I’ve got an RB25 with a trigger kit that includes a crank wheel, and I’ve hit a wall trying to sort a timing belt tracking issue. The belt either rides right on the edge of the cam/crank pulleys or walks slightly forward once the engine starts. It tracks okay-ish for a moment, then creeps right to the edge—and honestly, it’s stressing me out.   I’ve spent hours removing and reinstalling the belt, double-checking everything:   Tensioner setup is good, checked multiple times Idler pulley and washers are all in the correct places Followed the RB25 timing procedure step-by-step     The only thing I changed was the rear crank washer—I swapped the OEM one for a Neato version, and it made things worse. The belt now sits even more forward than before. I’m beginning to think the crank trigger wheel itself (from the trigger kit) is the issue—poor design or slightly off dimensions.   What’s strange is that with the previous belt setup, it actually ran fine for a couple of years—around 4,000 to 5,000 miles, even with hard driving and high RPMs. But even then, the belt was always riding right on the edge, and I know that’s not ideal or safe long term.   At this point, I’m debating whether to:   Machine a few mm off the crank trigger wheel to bring it back in line, or Replace it entirely with a better-designed unit     Only thing is, I already have the Cherry Hall sensors, bracket, etc.—I just want to replace the wheel only, not the entire kit. Anyone know a brand or supplier that sells just the crank trigger wheel on its own?   Would really appreciate any feedback—especially from anyone who’s run into this exact issue and found a reliable fix.   Thanks in advance.
    • Hi...a little refresh. Is Nistune gonna be enough to run BoV? Or do i need some proper ECU? 
×
×
  • Create New...