Jump to content
SAU Community

Recommended Posts

Hi Lads,

Cannot find answer after numerous searches. I live in a hot climate, and as a result the air-con sometimes takes a while to work. I set my unit to 20 degrees and only the foot vents work until the car cools down enough, then the top (dash) vents open. Must switch once the difference between the set value and the AMB value is small enough (maybe 8 or 9 degrees).

What really annoys me though, is that I cannot manually turn the top vents open until the cabin cools enough to automatically switch.

Is this normal? Can I override this?

Thanks, regards

Link to comment
https://www.sau.com.au/forums/topic/60237-r32-gtr-air-con/
Share on other sites

The climate control has a feature that isn't documented in the R32 owner's manual.

With the fan on, temperature set at 18 (the lowest it will go), press and hold the temperature

down button for a couple of seconds. The climate control will show "FC", the air conditioning

will come on in re-circulated mode. This must be a fast cool, as it sets the optimum setting for

cooling the car quickly. The re-circulation mode can be turned off.

There is a "FH" mode also with the temperature set at 32 (the highest temperature). Press and

hold the temperature up button to enter the FH (fast heat?) mode.

Link to comment
https://www.sau.com.au/forums/topic/60237-r32-gtr-air-con/#findComment-1145869
Share on other sites

Lads - thanks for the comments.

I know about the mode button - it switches to manual but still does not change vents.

I know and use the FC mode quite regularly - we must have downloaded the same skyline 'book!'

I ran a diagnostic check a few weeks ago, and it came up with a sunload error (common, ignored) and a water termerature sensor error. I do not think this has anything to do with the vents, though, as the AC is bloody cold when its working.

It just takes a little time to switch vents over, depending on the inside car temp.

Thanks for the comments lads.

Link to comment
https://www.sau.com.au/forums/topic/60237-r32-gtr-air-con/#findComment-1147409
Share on other sites

He had the car for a few days, Changed from old gas to new, cylender was damaged so he had to degas it, replace and regas it again. new control unit, from memory around 300. the guy I use is really really good. I always take any of my cars to him without a worry

Who is this guy? How much for the gas switch?

Cheers,

Lucien.

Link to comment
https://www.sau.com.au/forums/topic/60237-r32-gtr-air-con/#findComment-1147447
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • And I just realised that that advice is slightly nonsensical for a GTR, because you need 2 of them. But it is otherwise true.
    • Having had a reasonable look at the car, I'll be able to remove the (one time) rams and retract the hinge (they are held in the down location by a tiny (m3?) sacrificial screw) which will get it physically back in shape. From there if you remove the rams you need a resistor to turn off the airbag light (as Mark said, there are plug in kits and I might go that way because its reversible). And...per all the threads on here, even if you have the resistors to turn off the airbag light, the bonnet light will stay on as it writes to the airbag computer history - that is either replace the airbag controller, reprogam the EPROM (if I can work out how), or remove the globe from the dash. Having seen how sensitive this system is, if I had my time over I'd pre-emptively remove the rams, even on a road car, because this is all a very unnecessary pain in the arse. Reminds me, time to go and have a look at the Fuga too....
    • Hi, I need same this wing nismo , Does anyone have one for sale?  if any one have can contact me  00966546888343
    • Nah, lots of insurance repairs on V36 and V37 for pedestrians deployments. Reasons ranging from possums, to extremely severe potholes have deployed them. However, paying for the full repair can still be upto $5k AU some people have noted!
    • Hi, i got 1998 r34 4 door auto abs model and its manual converted with bigbox when i bought it . I successfully find the neutral and reverse light wire but can’t find the speed signal wires for speedo drive. I know its grey plug but on my loom no grey plug with 2 wires . I opened the loom upto where it getting branch with other wire, i’m amazed they is no wire. So need help how to fix the speedometer problem. I search on google it says some r34 model measure speed from diff sensor. Is it right? I talk to a wrecker he say no this isn’t right, i’m kinda stuck. Please help
×
×
  • Create New...