Jump to content
SAU Community

Recommended Posts

Gday,

Just wondering if anyone had solved these cefiro quirks. Or if anyone wanted to add any to see if we can solve them?

1. Rear windows

Why the hell are these permanently child locked? It looks pimped when the windows only go down half way but is this due to the side intrusion bars or is this how cefiros were made?

Is there anyway to make them go all the way down (some of my rear seat passengers whinge too much).

2. Auto door-lock

My car decides to lock all doors (except for the driver door) when the car starts or starts moving around 15-20kmh (it randomly chooses).

Is there a way to get rid of this and still keep the central locking button operative? (i'd still like to hit the switch to lock/unlock all doors but i'd like to stop the auto-lock).

Thanks.

Anyone else got any?

Link to comment
https://www.sau.com.au/forums/topic/60799-cefiro-quirks/
Share on other sites

they arent really quicks so much as they are features. Most 4 door cars only wound the windows down that far. I remember my dads commonwhore of that era doing the same thing... our mitsi. The door lock thing is a safety feature which is the same as the soarer has... as soon as u get up past 20ks it locks the doors... all tho it should lock them all. Mercedes bought this in as an anti hijack feature incase people got car jacked cause people always forgot to lock their doors when they got in the car.

Link to comment
https://www.sau.com.au/forums/topic/60799-cefiro-quirks/#findComment-1151598
Share on other sites

One man's feature is another man's quirks.

I find them annoying. I have visions of me being stuck after rolling my car (heaven forbid) in a deathtrap fireball and being locked in... Atleast I'd be safe in the knowledge that people couldn't hi-jack (or rescue) me while I was locked in.

And what's the deal .. how is locking all but the driver door stop hi-jacking? I don't see how a hi-jacker would go to try to jack me through the rear door :(

Still.. Anyone know how to get rid of it?

Slain I think it's been mentioned in a previous thread somewhere in this section how to rip the box out.

Link to comment
https://www.sau.com.au/forums/topic/60799-cefiro-quirks/#findComment-1151617
Share on other sites

A post was done about the 105km ping and how to stop it unsure where it was again.

and from memory a wire needs to be cut (again unsure where) and the auto locking will stop

no good for trying to do circle work with the door open foot on the ground and my mate jumping in the passange side while it keeps locking now is it :(

Link to comment
https://www.sau.com.au/forums/topic/60799-cefiro-quirks/#findComment-1151616
Share on other sites

hah adrnln.

CEF11E mentioned to me you can unplug the central locking thing and it will stop it. Obviously then you lose the functionality of the central locking button - which I'd like to retain.

One thing I have thought of is cutting that wire, then re-wiring the same wire from the actual drivers door lock (which is wired to central locK) and hook it up to the button. This way when you press the button it's the same as locking the drivers door (which will central locK/open).

I would prefer not to re-wire stuff so if I can just zap the module that detects the speed or disable that wire (so the central locking module always thinks it's at 0km or the car is off) that would be ideal.

The windows don't bother me as much as the door lock. Only because I have freaked out passengers and I get the shits with people trying to open doors while I'm pressing the button to unlock them.

Link to comment
https://www.sau.com.au/forums/topic/60799-cefiro-quirks/#findComment-1151623
Share on other sites

The drivers doors doesnt lock automatically with the others because it doesnt have a motor in it .....found this out when i got the immobiliser and hooked up to the central locking. All my doors lock now !:) little annoying.

The chiming noise can easily be removed ...its one of two black boxes under tha dash ..... just unplug it....oneis for the ligfhts and the other is for the doors.

Link to comment
https://www.sau.com.au/forums/topic/60799-cefiro-quirks/#findComment-1151777
Share on other sites

The drivers doors doesnt lock automatically with the others because it doesnt have a motor in it .....found this out when i got the immobiliser and hooked up to the central locking.  All my doors lock now !:( little annoying.  

The chiming noise can easily be removed ...its one of two black boxes under tha dash ..... just unplug it....oneis for the ligfhts and the other is for the doors.

So what did you have to do to make all doors lock with your alarm? Put in a motor?

see none of these happen in my car... no speedo noise... no auto locking... :D

only thing mine does the same is the windows which as u said isnt really an issue.

Just out of interest when you hit your central locking button in your door do all of the doors open and close?

IF SO - Any chance you can have a look at your door consoles to see if there are any obvious wires unplugged? :)

:)

Link to comment
https://www.sau.com.au/forums/topic/60799-cefiro-quirks/#findComment-1151826
Share on other sites

the reason the rear windows don't go down all the way is because the cefiro has 4 doors, ie: a rear wheel well interrupting halfway down the rear door, if it was to go all the way down it would cut into your tires =P

i don't have the issue with the auto-lock and mine was a grandpa spec, to tell truth i don't really have any quirks!

except i do really hate the reverse BEEEEEEEP BEEEEEEEEEP BEEEEEEEP BEEEEEEP

noise, what the sh*t is the point of that? if it's on the outside of the car i can understand cos it lets kids know your reversing but inside the car? WHY!?!?!

Link to comment
https://www.sau.com.au/forums/topic/60799-cefiro-quirks/#findComment-1151896
Share on other sites

the reason that the windows only go down half way is because the wheel arch which takes up some of the rear door space actually prevents the window from going down completely.

to make the window go down completely, you need to create a split window, one that cuts out the rear bit of the window (does that make sense?), so that the back bit of the window does not actually meet the wheel arch bit.

i hope you can understand that.

Link to comment
https://www.sau.com.au/forums/topic/60799-cefiro-quirks/#findComment-1151910
Share on other sites

So what did you have to do to make all doors lock with your alarm? Put in a motor?

Just out of interest when you hit your central locking button in your door do all of the doors open and close?

IF SO - Any chance you can have a look at your door consoles to see if there are any obvious wires unplugged? :D

:)

yeah central locking still works from the inside... but from the drivers side key it only operates my door.

Link to comment
https://www.sau.com.au/forums/topic/60799-cefiro-quirks/#findComment-1151935
Share on other sites

i put in a central locking alarm so we had to wire a motor to the driver door, all the others had factory ones, so now when I go over 15km/h ALL the doors including the driver doors lock.

My chime's still on as my dad actually likes that feature, but its a real PITA when you have to drive from melb to syd at 110km/h with that blasted thing on... luckily i packed some earplugs.

The windows are a standard feature... like all cars fromt hat time, including eunos cosmo's and laurels.

Link to comment
https://www.sau.com.au/forums/topic/60799-cefiro-quirks/#findComment-1152022
Share on other sites

That makes sense.

Looks like I might have to execute my plan to "fix" the auto lock thing and still retain full central locking feature.

Just out of interest how'd you put the driver side motor in? Is it hard? Where did you source it from? I need to put alarm in shortly :)

Link to comment
https://www.sau.com.au/forums/topic/60799-cefiro-quirks/#findComment-1152031
Share on other sites

danny from autotrust did it for me while I helped (mostly watched) took him about 5 mins to wire the extra motor and the locking mechanism in. Using a standard solenoid available over the counter. You'll have to get the exact details off him, but yeah all up it wasn't too hard because my car already had the central locking stuff wired up.

All we did was make the alarm trigger the central lock AS WELL as the speed safety mechanism. And then instead of locking all the passenger doors, made it lock all 4 doors by using the extra motor.

There is a way of disabling the speed lock, danny showed me how, but I can't remember exactly, it was as simple as terminating one of the wires going into the central lock trigger.

Link to comment
https://www.sau.com.au/forums/topic/60799-cefiro-quirks/#findComment-1152050
Share on other sites

yea i had another motor put into the drivers door to make it lock .......its weird how they didnt come with it ........i thought mine had been taken out or something .......like a few other things ...but seeing most other people have the same thing ...looks like it was stock...

.....next time im at the auto electrics place might ask him to have a look an see it i can have the auto door lock feature removed ...cause it pees me off ..and most of my friends hehe ....

once they get to my car they cannot leave! heheh

Link to comment
https://www.sau.com.au/forums/topic/60799-cefiro-quirks/#findComment-1152238
Share on other sites

he's holidaying in the phillipines with his wife n kid right now... but he's from VIC :)

I'd show you my cef, its sittin in Dundas right now, but I dunno if my dad'll be too keen on strangers taking his door panel apart :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/60799-cefiro-quirks/#findComment-1152586
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • When I said "wiring diagram", I meant the car's wiring diagram. You need to understand how and when 12V appears on certain wires/terminals, when 0V is allowed to appear on certain wires/terminals (which is the difference between supply side switching, and earth side switching), for the way that the car is supposed to work without the immobiliser. Then you start looking for those voltages in the appropriate places at the appropriate times (ie, relay terminals, ECU terminals, fuel pump terminals, at different ignition switch positions, and at times such as "immediately after switching to ON" and "say, 5-10s after switching to ON". You will find that you are not getting what you need when and where you need it, and because you understand what you need and when, from working through the wiring diagram, you can then likely work out why you're not getting it. And that will lead you to the mess that has been made of the associated wires around the immobiliser. But seriously, there is no way that we will be able to find or lead you to the fault from here. You will have to do it at the car, because it will be something f**ked up, and there are a near infinite number of ways for it to be f**ked up. The wiring diagram will give you wire colours and pin numbers and so you can do continuity testing and voltage/time probing and start to work out what is right and what is wrong. I can only close my eyes and imagine a rat's nest of wiring under the dash. You can actually see and touch it.
    • So I found this: https://www.efihardware.com/temperature-sensor-voltage-calculator I didn't know what the pullup resistor is. So I thought if I used my table of known values I could estimate it by putting a value into the pullup resistor, and this should line up with the voltages I had measured. Eventually I got this table out of it by using 210ohms as the pullup resistor. 180C 0.232V - Predicted 175C 0.254V - Predicted 170C 0.278V - Predicted 165C 0.305V - Predicted 160C 0.336V - Predicted 155C 0.369V - Predicted 150C 0.407V - Predicted 145C 0.448V - Predicted 140C 0.494V - Predicted 135C 0.545V - Predicted 130C 0.603V - Predicted 125C 0.668V - Predicted 120C 0.740V - Predicted 115C 0.817V - Predicted 110C 0.914V - Predicted 105C 1.023V - Predicted 100C 1.15V 90C 1.42V - Predicted 85C 1.59V 80C 1.74V 75C 1.94V 70C 2.10V 65C 2.33V 60C 2.56V 58C 2.68V 57C 2.70V 56C 2.74V 55C 2.78V 54C 2.80V 50C 2.98V 49C 3.06V 47C 3.18V 45C 3.23V 43C 3.36V 40C 3.51V 37C 3.67V 35C 3.75V 30C 4.00V As before, the formula in HPTuners is here: https://www.hptuners.com/documentation/files/VCM-Scanner/Content/vcm_scanner/defining_a_transform.htm?Highlight=defining a transform Specifically: In my case I used 50C and 150C, given the sensor is supposedly for that. Input 1 = 2.98V Output 1 = 50C Input 2 = 0.407V Output 2 = 150C (0.407-2.98) / (150-50) -2.573/100 = -0.02573 2.98/-0.02573 + 47.045 = 50 So the corresponding formula should be: (Input / -0.02573) + 47.045 = Output.   If someone can confirm my math it'd be great. Supposedly you can pick any two pairs of the data to make this formula.
    • Well this shows me the fuel pump relay is inside the base of the drivers A Pillar, and goes into the main power wire, and it connects to the ignition. The alarm is.... in the base of the drivers A Pillar. The issue is that I'm not getting 12v to the pump at ignition which tells me that relay isn't being triggered. AVS told me the immobiliser should be open until the ignition is active. So once ignition is active, the immobiliser relay should be telling that fuel pump relay to close which completes the circuit. But I'm not getting voltage at the relay in the rear triggered by the ECU, which leaves me back at the same assumption that that relay was never connected into the immobiliser. This is what I'm trying to verify, that my assumption is the most likely scenario and I'll go back to the alarm tech yet again that he needs to fix his work.      Here is the alarms wiring diagram, so my assumption is IM3A, IM3B, or both, aren't connected or improper. But this is all sealed up, with black wiring, and loomed  
    • Ceste, jak se mas Marek...sorry I only have english keyboard. Are you a fan of Poland's greatest band ever?   
×
×
  • Create New...