Jump to content
SAU Community

Recommended Posts

there are a few R31's that are super charged, can pull about 130 kws with about 10 psi (correct me if im wrong)

Thats funny. :D

Drop a RB25 head on a RB30 with a set of rb25 pistons to bring the comp up to 10.5:1 and you see that kind of power. :)

Guest Mashrock

rb26dettr

twin turbo supercharged..

now thats nice.

there are massive advantages of a setup up like this.

you can use a spuercharger for all the downlow boost. and have either one or two massive snails to finish off the job, if i had the money and time i would try and do something similar..

here's a photo..

i havnt really found any info on this motor ever tho.. if anyone could help??

I know why they call supercharges parasites.

 

Checking out one of the whipple flow maps I noticed to flow 500-600cfm it sucks around 40hp.

Yes, but, with a turbo you are also losing a lot of power due to the extremely high exhaust backpressure (usually a little higher than the boost pressure).

Where's Warpspeed when you need him.

I went throught the supercharging thing on in line 6 cylinder engines back when the dinosaurs roamed the earth. Admitedly that was on Holden Red motors. I really carnt see why it carnt be done now even better with the multi valve twin cam engines of today.

Considering my motor was making 497hp and 523lbs/ft of torque on pump gas and even more on alcohol !

I know nissan made a car (cant remember which one - one of those small cc jap race cars) that had both a supercharger and a turbo on it. The supercharger would give it the botton end power then as the revs rose and the turbo came onto boost it would change over to the turbo.

A supercharger has all of the advantages that a Tubro has as disadvantages(ie good at the bottom, running out of puff at the top, no lag, turbo has no reall loss of power at the bottom end, but the supercharger takes power from the bottom end of the rev range)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
×
×
  • Create New...