Jump to content
SAU Community

Recommended Posts

hey all,

after driving the car for a bit, ive come across a few things that dont seem too good.

theres a sound that im sure is coming from the turbo when it spools up, which sounds like a screaming screeching sound (almost like tyres screeching). i know what a spool'ed turbo sounds like, but this is a louder, higher pitch sound. any suggestions on what it could be?

secondly, the car drops boost as it goes towards redline. on take off, it makes 0.5bar by 2500rpm, 0.8bar by 3200rpm, starts dropping at around 5800rpm and hits back to 0.5bar at 7000rpm.

my first thoughts would be the turbo is too small and cant provide, but ive read on here rb20 turbos are capable of running 12psi all the way to redline? although, looking under the car the turbo did look rather small.. do those turbo actions sound like anyone elses stock rb20?

any thoughts would be appreciated.

thanks, shaun.

Link to comment
https://www.sau.com.au/forums/topic/62428-my-turbo-in-quetion/
Share on other sites

Tyre screeching sound :uhh: depends what you mean if its metal scraping metal thats not good! But if not its proberly just the way the turbo spools.

Boost drop off can be a number of things.

Stock RB20 with usual pod and boost. You need the other bits & pieces to go with it, exhaust, dumpipe, FMIC. - If you havn't already got them.

The turbo carn't be running out of efficency already because its only stock boost, so sounds like a restriction problem at high RPM.

:D

Jun

Both your problems are caused by the one fault.

Turbo to manifold gasket.

You are probably missing a bolt/nut that is holding the turbo to the manifold.

if they are all there, then you will probably find that one or more are loose.

the above 2 problems cause HOT HOT exhaust gases to escape from the nearest opening, and this is obviously between the turbo and exhaust manifold.

this burns the gasket and then you eventually start hearing the high pitch squeel when you come on boost. obviously because this is when there is more pressure going through there..

if you leave it, you will eventually start hearing the car run like a lawn mower on cold starts..

sort of a ch ch ch ch sound as air escapes through there..

now.

the boost drop at high revs.. again, the leaking gasket is to blame cause it is taking the easiest exit out of the system here..

it just can't hold that pressure when there is a leak.

GCG turbo's in Sydney sell the nissan exhaust gasket kits for $27 I think.

then it's a matter of spending the time doing it yourself or paying like $200 for a mechanic to do it for you.

I'd take the mechanic option as this will mean that when he brakes a manifold stud (and he will and so will you if you try it), he can just drill it out and tap a new one in.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...