Jump to content
SAU Community

driver training day (drift)oran park Sunday Feb 27th


Recommended Posts

FDD returns oran park south circuit SUN 27th feb

same as all the other time 20 spots for drift and 40 for the track

all welcome

Circuit and Drift day all welcome 27th Feb 2005

Driver training: Aaron McGill of Auto-Motion Australia will have professional driver trainers on hand to give tips on circuit and drift techniques. The focus of the day is to improve driving techniques for drivers of all skill levels and have a great time. Flag marshal posts will be manned on the day.

Where: Oran Park South Circuit Time: Get to the track at 8am for sign on and scrutineering. The day will finish at 5pm. There will be three rotating sessions of 20 minutes through out the day one for circuit training and one for drifting.

Cost: $150 (for the full day and includes lunch) discounts apply for club members.Limited numbers: There will only be 60 spots available for the day. Get in quick! Three sessions of 20 minutes (one drift session and 2 track sessions)

Drivers will need: Helmet, long sleeve shirt and long pants. Cars will be inspected to check for track worthiness.

Spectators: $5.00 will be charged to all spectators. Viewing area to be advised.

Bookings: Payment will need to be finalised by 20 Feb 2004. Email Peter on [email protected] for payment details

Whether you drive a stock family car or the latest Jap drifting machine, get out there and give it a go. Where else do you get to drive fast, safe & sideways, and where it's legal?

The day is organised by Peter Carruthers, and professionally run by Aaron McGill of Auto-Motion Australia driver training - Aaron McGill has 20 years racing experience and 11 years professional driving instructing experience. Oran Park Raceway - Cobbitty Road, NARELLAN For any enquiries, call Peter on 0409 226 626.

  • Replies 145
  • Created
  • Last Reply

Top Posters In This Topic

Three sessions of  20 minutes (one drift session and 2 track sessions)

Just to clarify - Is that only 60 minutes of track time for the whole day? And it must be 1 session drift, 2 track? I.E. Can you do 3 of track, or 3 of drift, or 2 drift, 1 track....

I doubt I will have my car by then, But I could be interested in the next one.

Just to clarify - Is that only 60 minutes of track time for the whole day? And it must be 1 session drift, 2 track? I.E. Can you do 3 of track, or 3 of drift, or 2 drift, 1 track....

I doubt I will have my car by then, But I could be interested in the next one.

You are put in one of the three groups (drift, track1 or track2).

Each session is 20 minutes. After 20 minutes you all go back in and the next group goes out.

The last one i think we all did 5 or 6 sessions at least?? The day is from 9-5. There is a small break for lunch which was filled with a passenger drift session. And at the start of the day is a driver briefing..

cool. sounds good

So south circuit....is that the one they have the drift comps on (the one under the bridge) or is it the main faster circuit, where they cut of the cool corners around the bridge?

If it is the main circuit, how does drifitng go there? I havn't paid a huge amount of attention, but i', guessing u'd need to be doing some bloody fast drift to drift thos corners?

grab'd my interest.. but one thing i need to know is, and i've posted this up once b4. Can u drift using an auto/tipronic g/box?.. i'm interested in doin` the track but more liking to drift. If so would there be someone there to show me how to do so with the auto?.. Oh and another thing.. the car lags! Hits boost bout 4000rpm, is that a problem?

thanks




  • Similar Content

  • Latest Posts

    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
    • It's been quite the ordeal but hey, at least you figured it out.
    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
×
×
  • Create New...