Jump to content
SAU Community

driver training day (drift)oran park Sunday Feb 27th


Recommended Posts

  • Replies 145
  • Created
  • Last Reply

Top Posters In This Topic

yeah a very sad story but it will be back soon :rolleyes: It went back to the machine shop on Fri and we should have it back to start again on Tue. Hoping to have the engine back in and running by w/end after next.

And we've pretty much finished up the interior too, seats, harnesses, kill switch, data logger.

Still need to reinstall bushes, subframe, diff, suspension, brake lines....but its getting close, probably 100% ready in 4 weeks

Sick... must be pretty stressfull. I know if it was me I would be throwing spanners across the garage if that happened. What are the rules for the touring category in regards to brakes and diffs - free for all, do what want type thing?

fatz: when you say there would be flag marshalls on the track it means the dudes in white suits and earmuffs waiving different color flags? Hopefully we get a crash course on those in the beginning because i can see myself getting beaten up by 5 blokes who were tailgating me while i was waived to pull over and let pass.

yeah some spanners have been abused in the building of that engine :cheers: The rules are pretty tight, only things we can change are ECU, coilovers, diff centres, and add safety stuff like cage, seat, harness, kill switch. Luckily we can run N1 spec which includes larger wheels and tyres and the brembo brakes.

Yeah there will be a couple of guys manning the flag points, 3 last time I think. Basically they will show yellow flag if there is an incident and red if the session is over (back to the pits).

Fatz,,,Is it okay to pay you on the day?. I've got a problem with one of the rear calipers and Race Brakes www.racebrakes.com.au are trying to fix it.

Neil.




  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...