Jump to content
SAU Community

Recommended Posts

hey does anyone have any idears i have a rb25det neo in my r32 haveing some difficultys with air con

i put my air con into diagnostic mode and it gives me two faults one is water temp sensor witch one is this the one for the dash or the one for the ecu and also it faults on the sunload sensor and if the water temp sensor is the ecu one will it mater that its the r34 one

Link to comment
https://www.sau.com.au/forums/topic/62696-air-con-problems/
Share on other sites

[if you did the diagnostic in a garage or low light situation it will come up with a sensor problem. I checked my on my R33 in the dark and it told me there was a problem with that sensor, did it in daylilght and there was no problems. I don't think it woujld stop your air con from working though. Do you know if the compressor is OK?

Link to comment
https://www.sau.com.au/forums/topic/62696-air-con-problems/#findComment-1183029
Share on other sites

I have had ongoing Aircon problems. It WORKS, but its only full cold 18`c, but anything >= 19`c it runs at full hot. Suspected that my dash cabin sensor was the culprit, but Have since been informed by Powerplay that I'm missing the external temp sensor up the front in the bay somewhere. Just waiting to get it fixed and gassed :P

Link to comment
https://www.sau.com.au/forums/topic/62696-air-con-problems/#findComment-1183645
Share on other sites

Glad it's not just me, having the same problems with my R32, compressor didn't want to spool up, when it did it cycled on & off without cooling the car down. Diagnostic check in driveway displayed sunload sensor code, was wondering where it is & how to get to it/fix/change it. Might also get the system checked to see if it needs regasssing. Had the car for a year, no dramas up till now. Any aircon gurus out there?

Link to comment
https://www.sau.com.au/forums/topic/62696-air-con-problems/#findComment-1183981
Share on other sites

Mines leaking because the origional Compressor carked it, and had a new one put it, but apparently GTR compressors dont fit the GTS-t. They FIT, but one of the connectors is too big, hence the leak. Still waiting for Powerplay to get back to me about a replacement.

Link to comment
https://www.sau.com.au/forums/topic/62696-air-con-problems/#findComment-1184558
Share on other sites

Water temp sensor for a rb20det is the same as a nissan maxima v6 model... Yeah paid $60 from nissan... Fitted in 20 seconds with a bit of thread tape....

Had the same water temp sensor in the same car, Neo 32. Replaced the sensor with a part from nissan (~$70) aircon works fine now.
Link to comment
https://www.sau.com.au/forums/topic/62696-air-con-problems/#findComment-1188585
Share on other sites

I have had ongoing Aircon problems. It WORKS, but its only full cold 18`c, but anything >= 19`c it runs at full hot. Suspected that my dash cabin sensor was the culprit, but Have since been informed by Powerplay that I'm missing the external temp sensor up the front in the bay somewhere. Just waiting to get it fixed and gassed :P

Hey Jordan, I have the exact same problem. Its a real pissa when u dont want it to be that cold but its too hot to roll the windows down. Could you do me a fav and pm wat the problem was, cause i'll be wanting to get that fixed. Thanks man. I wonder if we are the only ones with this problem.

Link to comment
https://www.sau.com.au/forums/topic/62696-air-con-problems/#findComment-1192347
Share on other sites

  • 12 years later...
On 02/02/2005 at 10:01 PM, GroundRun said:

Hey Jordan, I have the exact same problem. Its a real pissa when u dont want it to be that cold but its too hot to roll the windows down. Could you do me a fav and pm wat the problem was, cause i'll be wanting to get that fixed. Thanks man. I wonder if we are the only ones with this problem.

Sorry for reviving an old thread.
I have this exact issue for my R33 Type M GTST here in Japan. What was the fix. It's driving me insane!

Link to comment
https://www.sau.com.au/forums/topic/62696-air-con-problems/#findComment-7827364
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It turns out that Setrab make a fan specifically for the oil cooler which is great and I've installed it with minimal swearing. I removed my 2x 12in push fans from the front of my aircon condenser and wired them into this. My main thermo fans kick on when I use the aircon anyway and would effectively already be working as puller fans through the condensor which is infront of the rad. The push fans (understandably) didn't really do much in the config they were previously in so now they're out. Now we're on to the "Oil fan doesn't really do much either!". Yes I'll duct it next if it does nothing in heavy use which it shouldn't. But hey, the object exists and fits great and is cool. Let me have this. The car is still in the "do my fittings leak oil now? do my wheels actually rub?" phase. I did a spirited drive on them and didn't hear or feel anything. Then I got back home and noticed there were grind marks on the inside of the rims, though I couldn't see where they were touching I got out the grinder and attacked the suspects. Note: I do not know how to use a grinder. Then I realised I had dragged my new rims across my concrete driveway before I did this drive. I didn't think I had damage at that time when I briefly looked...... but remembered this occurred after I did all the angle grinding. The grinding on the wheels in some very specific spots. It's not around the whole rim for example, which lines up with dragging it across concrete more than hitting a suspension component for even 1 full rotation. So everything is currently painted and taped up and I need to test it some more to see if it really IS rubbing, but from inside the car it doesn't feel like it is. In other news I attempted to do a before and after comparison of the heads/cam upgrade thing. Dynos lie, everything is in different measurements. Here is the data from the sandown back straight. Car go faster than before. Vroom vroom.
    • Here's my base ignition. +3 correction to redline when shooting water/meth which is always on. Looking at my old ignition table, I should be able to add 1-2 degree's next time I'm on the dyno.  Let me know your thoughts. 
    • Given what I know now - same haha, but this was 12 years ago with second hand 740cc Nismo injectors in my S15 daily, I was too busy hunting elsewhere for the issue to even look at the injectors, running through some cleaner was a happy coincidence haha
    • Not a terrible idea. But if I ever had concerns that my injectors were sufficiently dirty to be causing me a problem, they would be out of the engine and onto the actual injector cleaner/testing bench.
    • Run some injector cleaner through it I had a similar issue that plagued me for months, even tried replacing the cat. If one or more injectors are blocked up the ecu sees ping so pulls timing and makes the tune rich overall, you'll see black smoke coming out of the exhaust and like me assume it's running rich but it could only be one or two cylinders  $10 bottle of injector cleaner and the next time I hit boost it pumped out a huge plume of black smoke, cleared the blockage and then ran great, if that's not the issue it's only a cheap thing to try haha  
×
×
  • Create New...