Jump to content
SAU Community

Recommended Posts

as previously said by steve the rule only needs ministerial signage, not parliament.

If this is addressed to me, my point was not that parliament is required, but that Ministers will actually have to be "at work" as of next week: most are still currently on holidays.

Agreed, another example of the government putting other issues ahead of what its own citizens want.

I personally will be going to Japan and getting a few personal vehicles once the 15yr old rule has been murdered. Taking orders now!!! :P

Well, I hope you planning to spend multiple years there, because AFAIK your only allowed to bring in one vehicle (at a time), and you have to show ownership and use for 12 months.

Edit: Combined posts.

LW.

Agreed, another example of the government putting other issues ahead of what its own citizens want.

I personally will be going to Japan and getting a few personal vehicles once the 15yr old rule has been murdered. Taking orders now!!! :P

Well, I hope you planning to spend multiple years there, because AFAIK your only allowed to bring in one vehicle (at a time), and you have to show ownership and use for 12 months.

LW.

']you must prove ownership for a year to qualify as a personal import.

no limits on the number from what i know, if you can afford to own 10 gtr's more power to you

To be eligible for a personal import the following criteria must be satisfied:

The vehicle has been owned and used by the applicant for a continuous period of at least 12 months;

The applicant has not imported a road vehicle owned by him/her within the year ending on the day on which the vehicle in respect of which the application is made is landed in Australia.

One vehicle every 12 months,

']you must prove ownership for a year to qualify as a personal import.

no limits on the number from what i know, if you can afford to own 10 gtr's more power to you

Bzzzt.

Personal Imports – Part 8 on the Application Form

Visitors, temporary residents, foreign diplomatic personnel, companies and corporations are not eligible to import a vehicle under the personal import scheme.

This scheme allows a vehicle to be imported as a personal import without proof that it meets the ADRs, but the vehicle is expected to provide a level of safety similar to Australian vehicles.

To be eligible for a personal import the following criteria must be satisfied:

1. the vehicle has been owned and used by the applicant for a continuous period of at least 12 months (3 months where ownership and use of the vehicle commenced before 8 May 2000);

2. at the time the vehicle is imported, the applicant is:

    1. an Australian citizen or an Australian permanent resident; or

    2. a person who has applied to become an Australian citizen or an Australian permanent resident;

3. the applicant is of an age that entitles him or her to hold a licence or a permit to drive a road vehicle of that type;

4. the applicant undertakes to comply with any requirements as to road safety that are imposed in respect of the vehicle by the Administrator; and

5. the applicant has not imported a road vehicle owned by him/her within the year ending on the day on which the vehicle in respect of which the application is made is landed in Australia.

The government isn't that stupid I'm afraid.

Edit: Doh, didn't see others had replied.

LW.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...