Jump to content
SAU Community

Recommended Posts

hello to all , i am interested in upgrading my gtr's turbos and i need some advice to whether i should go a big single or a nice size twin set up??. I want at least 400 at all 4 wheels and if possible can you guys give some adive to when the turbos would come on to boost??? any information will be greatly appreciated!!!

thanks :Bang: :Bang: :Bang:

Link to comment
https://www.sau.com.au/forums/topic/63346-big-single-or-twin-turbo-upgrade/
Share on other sites

If you are talking 400hp at the wheels this can be easily achieved with a pair of nice low mounts such as n1's or 2530's at 1.2-3bar on pump fuel in a GTR You will also have the same response down low as the stock turbo's and the car will be a pleasure to drive on the street .

Big singles are good for making big peak power and also the underbonnet wow factor but cruising around the street you will have no were near as much response as with the low mounts . When it all boils down for a street GTR low down and mid range response is what it's all about as I rarely wind my car right out on the street soppose it's why I've kept my license all this time :P.

Guess it depends what kind of performance your after. Personally im going for a large single turbo. Engine rebuild with a higher rpm redline would really be needed to get the best out of it though. Twins would be great for response but a large single will give you that "time to go home and change the underware" kinda feelin!! :wassup:

Guess it depends what kind of performance your after. Personally im going for a large single turbo. Engine rebuild with a higher rpm redline would really be needed to get the best out of it though. Twins would be great for response but a large single will give you that "time to go home and change the underware" kinda feelin!!  :wassup:

Well that's why the GTR has twin turbos anyway isn't it - for responsiveness. The ceramic turbine wheel was chosen for responsiveness, not absolute power?

Go a big single...T78 or T88 get the smaller version though the T88-33D you will see boost Around 5400-5600rpm On the stock motor...Although 272* cams were used, cooler, etc etc...

Mods would vary when the turbo comes on...

Its a simple set up you can get one between $4500-5500 depending on condition...

And you get the awesome wastegate scream ;)

As for the power you will easily pull over 400KW@all 4 wheels considering the mods etc....

If you are talking 400hp at the wheels this can be easily achieved with a pair of nice low mounts such as n1's or 2530's at 1.2-3bar on pump fuel in a GTR   You will also have the same response down low as the stock turbo's and the car will be a pleasure to drive on the street .  

Big singles are good for making big peak power and also the underbonnet wow factor but cruising around the street you will have no were near as much response as with the low mounts . When it all boils down for a street GTR low down and mid range response is what it's all about as I rarely wind my car right out on the street soppose it's why I've kept my license all this time ;).

7heaven is spot on the mark

90%plus of your driving will be at lowish speed(below110) and lowish revs, general driving so its nice have a car that is a pleasure to drive normally, as well as a monster when you leen on it.

Go twin r34 N1 or hks2530 you'll never regret it :wassup:

I think that most of you dont actually realise that gone are the days where two smaller turbos give better responsiveness than one. Physics will also support this fact and sorry to those who want to try and argue against it, because physics can't be changed. The fact is, with two turbos you have twice the loss energy required to spin the turbine, leaks, twice the oil getting into your compressed air (since no turbo is 100% seal-proof). OK, since they're smaller turbos (compared to lets say one big one), the losses will be smaller through each turbo, but not combined. That taken into consideration, it is impossible for two small turbos to be more responsive than one larger turbo which of the same horsepower rating of the two turbos combined. Now you may argue against this, and I will most likely take your side if you chose to implement the T88 or T78 as your examples. These are old-school plain bearing pieces of crap which make the horsepower only in the big revs. The reason is because they are old school crap turbos. These days we have BB turbos and gone are the days where two is better than one for responsiveness. You can see that this logic has been adpated to by in commercial cars. Take the new subaru B4 for example. Its predesessor had two sequential turbos for responsiveness. Now it only has one BB making more power, more response (yes power ealier) and more mid range power. There is a GTR going around that exploits this very fact too. It has a single BB GT30 and runs in the tens with no loss in drivability, certainly less than a pair of 2530s. Twin is old school and you only ever need to run twin if one BB turbo cant provide you with the power you want. Considering garette make a BB 1000 hp turbo, that rules out most cases. This is my experience anyway. But before you hammer my comments, ask yourself if you have ever driven a GTR with a GT30 and compared its drivability to something with twin turbos that can also do 10s.

I think that most of you dont actually realise that gone are the days where two smaller turbos give better responsiveness than one. Physics will also support this fact and sorry to those who want to try and argue against it, because physics can't be changed. The fact is, with two turbos you have twice the loss energy required to spin the turbine, leaks, twice the oil getting into your compressed air (since no turbo is 100% seal-proof). OK, since they're smaller turbos (compared to lets say one big one), the losses will be smaller through each turbo, but not combined. That taken into consideration, it is impossible for two small turbos to be more responsive than one larger turbo which of the same horsepower rating of the two turbos combined. Now you may argue against this, and I will most likely take your side if you chose to implement the T88 or T78 as your examples. These are old-school plain bearing pieces of crap which make the horsepower only in the big revs. The reason is because they are old school crap turbos. These days we have BB turbos and  gone are the days where two is better than one for responsiveness. You can see that this logic has been adpated to by in commercial cars. Take the new subaru B4 for example. Its predesessor had two sequential turbos for responsiveness. Now it only has one BB making more power, more response (yes power ealier) and more mid range power. There is a GTR going around that exploits this very fact too. It has a single BB GT30 and runs in the tens with no loss in drivability, certainly less than a pair of 2530s. Twin is old school and you only ever need to run twin if one BB turbo cant provide you with the power you want. Considering garette make a BB 1000 hp turbo, that rules out most cases. This is my experience anyway. But before you hammer my comments, ask yourself if you have ever driven a GTR with a GT30 and compared its drivability to something with twin turbos that can also do 10s.

there is one thing your missing Graham bell explain it better than me in Forced induction , its a fact they discovered then forgot and discovered again , i will try my best to explain in my terms

The clearer the exhaust pulse signal ,the more efficient the turbo will spool

(by thing less cylinder per turbo more efficient)

this is not an ideal i made up but a stated fact from published documentation as Graham Bell talks about in his book and i believe this is why all top level turbocharged car were twin turbo and why F1 never used single turbo configuration.

Please just passing on what i have read for on the subject

:P

As far as I know most upgraded twins dont make full boost till 3000rpm or higher.

My single GT35R made full boost at 4000rpm.

Good for up to 500rwhp, cheaper, simpler and lighter.

I like having two power modes: the one without boost to drive around

local streets in stealth mode, and a nice wide top half for other occasions.

At least the RB26 has enough torque off boost to get around at a respectable pace.

Huge huffers that dont happen till 6000+ would be just plain annoying though.

a TT engine bay can be a bit tight... if you want to do work yourself etc.

a big single opens up things a bit more.

just another thing to consider if your the DIY person.

I tried removing my own low-mount (big single) what a mission. If it was high-mounted i'd have had it off in under an hour.

I think that most of you dont actually realise that gone are the days where two smaller turbos give better responsiveness than one. Physics will also support this fact and sorry to those who want to try and argue against it, because physics can't be changed. The fact is, with two turbos you have twice the loss energy required to spin the turbine, leaks, twice the oil getting into your compressed air (since no turbo is 100% seal-proof). OK, since they're smaller turbos (compared to lets say one big one), the losses will be smaller through each turbo, but not combined. That taken into consideration, it is impossible for two small turbos to be more responsive than one larger turbo which of the same horsepower rating of the two turbos combined. Now you may argue against this, and I will most likely take your side if you chose to implement the T88 or T78 as your examples. These are old-school plain bearing pieces of crap which make the horsepower only in the big revs. The reason is because they are old school crap turbos. These days we have BB turbos and  gone are the days where two is better than one for responsiveness. You can see that this logic has been adpated to by in commercial cars. Take the new subaru B4 for example. Its predesessor had two sequential turbos for responsiveness. Now it only has one BB making more power, more response (yes power ealier) and more mid range power. There is a GTR going around that exploits this very fact too. It has a single BB GT30 and runs in the tens with no loss in drivability, certainly less than a pair of 2530s. Twin is old school and you only ever need to run twin if one BB turbo cant provide you with the power you want. Considering garette make a BB 1000 hp turbo, that rules out most cases. This is my experience anyway. But before you hammer my comments, ask yourself if you have ever driven a GTR with a GT30 and compared its drivability to something with twin turbos that can also do 10s.

If you say so. Anyway at this point the RB26DETT is "old school" because it's out of production.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There is a way, but it's not with the same cars. You need to find the same vintage of car, that we had. Realistically, that was an affordable car with aftermarket parts around. So what people need to find is a car that had a decent base in its day, and can be modified. They're looking for a car year make of 2010 to 2015 really... Aus could have done it if Holden didn't fold as V8 commodores were cheap, and if Ford didn't get expensive thanks to COVID, then you could cheaply play with FG Barras. Realistically, those are just a bit heavier, four door skylines. I'm sure the US and UK have similar cars they could find.
    • Haha I do that.. thats when it chirps..The bit point for me is almost non-existent. Otherwise I stall it. But yes, in terms of performance, the clutch is solid af.
    • Greg speaks wisdom. These dirty old Datsuns are only value when they are cheap. When they are not cheap, there is no value. Sounds contradictory, but it's true. We are now 20 years past the hey day of modifying cheap 90s JDM cars for small amounts of money. This is a different world. If you are rich and can afford not to care about what is effectively wasting money on an old Datto shitter, then I have no reason to argue against it. But if you are wanting to experience what we all experienced back in 2005 (and I bought my car last century!) then there is no way to do it.
    • Short answer: No. Medium answer: No, because you still need to conjure the things out of thin air to bolt them to a NA to make it a NA+T. Long Answer: No - The things you need to conjure - meaning a turbo, intercooling, manifolds, exhaust, intake/manifold/piping, clutch, injectors, fuel pump, AFM (?), ECU + Wiring (woo, N/A loom fun) have to come from somewhere. You could have many scavenged these things from an OEM car that someone had upgraded from and use some of these. This will be cost prohibitive now, especially so in the USA. You'd probably pay the same for newer, upgraded components that are better than old OEM stuff from 25-30 years ago. None of these big ticket items are re-usable for the N/A car. Why not buy new and upgrade while you're there? The only real consideration is turbo and fuel sizing and determining whether you want to stay within the bounds of the OEM engine or get into rebuild territory. These limits ARE lower with a N/A motor and especially N/A gearbox at the starting point. And if you're gonna upgrade those then you may as well consider having them built to begin with. Because everyone here knows you're never far from that next engine rebuild once you start making the power you want... The cars you see on the internet and SAU etc have been built over decades. If you're really clued in... you would sell your US car to somebody for what you paid for it. You would then scour AU JDM pages or SAU and buy a car like Dose's on this forum with your powerful American Dollar. This will save you so much money in the long term. Importing it could be tricky. Or it might not because USA. I have long said the only reason 90's Japanese stuff took off was because a) Japanese people had Japanese cars so that is what they used b) Australians could import these cars to Australia with very minimal changes and use them on the road here c) Neither country had well-priced access to US or EU Sports Cars. I don't believe the JDM scene would have taken off in Australia at all if we had EU priced EU BMW M offerings, or more especially the AUS V8 Scene would never have existed if we had the multitude of US cars like Camaros, Mustangs, Corvettes at the prices you folks do. After all - Do the math. I would say put a V8 in your R34 and that's the smart way forward. It is. I did it. I know this from my own experience. But at that point there's no reason to simply not buy a C5 or C6? It would be simpler and easier and cheaper and bette-
    • Reading all this... hurts lol. I have an ENR34 5MT and I paid an inflated USA price for the car alone, had to do tons of preventative maintenance past that, and so I'm over $30K USD into the car already and haven't even touched power.  I wanted to +t it. Not even trying to make GTR numbers, I'd be happy with 250hp.  Can I get away with paying much less to make that happen?
×
×
  • Create New...