Jump to content
SAU Community

Craptastic Weird A$$ Indicator Spasticness

Messiah

By Messiah,
in General Automotive Discussion

 Share

Recommended Posts

Messiah Mentor

Messiah

Posted
Posted

The other day i started my car up to go for a spin and noticed that there is a noise that sounds very much like the clicking of the indicators but twice as fast coming from the steering column of my car.

It seems to be pretty intermittent at this time... sometimes clicking away like a mad man for a few seconds at a time other times it clicks incessantly for a few mins.

It doesnt seem to be triggering the the actual indicatore light (on the outside of the car) but i could have sworn that i once caught the left indicator dash light faintly fiicking on and off.

Twiddling the indicator stick (just indicating left or right) or turning the wheel sometimes fixes it up other times it just stops itself.

Has anyone else had this problem or know what it is or how to fix it? it doesnt appear to be causing any probs but its bloody annoying and i kinda prefer my car not to do weird and unexplained things.

Oh and before i forget, the only thing i did that was out of the ordinary before this happened was to drive home in the pouring rain the other day in the middle of wednesdays big a$$ storm. The indicator in my front left qtr panel is missing so a little water may have got in there but i would havye thought it would have dried out by now.

Cheers in advance.

(B1) MR_fanny Grand Master

(B1) MR_fanny

Posted
Posted

my car makes sounds like its readin a hard drive or doin calculations from the tacho dash. it only seems to do it when my cars fuel level hits the 1/4 mark or lower and only notice it when im at idle and lasts for a minute or 2. have no idea what it is though.

elbee111 Proficient

elbee111

Posted
Posted

Messiah,

I have the same problem. It has been this way for a year or two. It is something to do with the switch and/ or circuitry in the steering column. My suspicion is some sort of tracking or arcing do do with a wiper that is moved between contacts.

Laziness and a she'll be right attitude means that it hasn't bothered me quite enough to do something about it.

Yet.

El Bee

ps. Don't freak too much if you see wisps of smoke coming out of the steering column. Mine sometimes does this when the ticking has been going on for a long time. No joke.

bomb100 Newbie

bomb100

Posted
Posted

YES!!!

Mine does exactly the same thing, and indeed i would say it's the indicator stalk engaging slightly (or not disengaging properly).

And yeah, there's occasional wisps of smoke but don't worry that your car is on fire.

It's such a bitch to get the steering column apart that i cant be bothered in this hot queensland weather.

Atreyu Rising Star

Atreyu

Posted
Posted

Haha, my car did the exact same thing for ages. It could be the indicator relay playing up. Mine stopped doing it all of a sudden and hasnt started. I also noticed smoke twice. Once after we had the steering column apart. All good now though.

Jordan Rising Star

Jordan

Posted
Posted

Mine did that, I got the whole stalk assembly replaced (wiper and indicators are on the same unit) but it was replaced from a lesser model so I lost my fog switch on the indicator (Not that I have foggies anymore anyways). Fixed it right up

  • 2 months later...
RTHRTY3 Rising Star

RTHRTY3

Posted
Posted
  Jordan said:
Mine did that, I got the whole stalk assembly replaced (wiper and indicators are on the same unit) but it was replaced from a lesser model so I lost my fog switch on the indicator (Not that I have foggies anymore anyways). Fixed it right up

how much does it cost ya to replace that whole stalk assembly? Being new or from wreckers?

oh and another thing is there a step by step instructions on how to pull the steering column apart (without causing anything to break :D)? Could somebody care to explain please.

Thanks in advance :D

elbee111 Proficient

elbee111

Posted
Posted

Finally got around to fixing this problem about 2 or 3 weeks ago.

Bought a second hand replacement for about $75.

I took the steering wheel off and the plastic surrounds etc, and found the stalk held in by about three screws.

All good now.

El Bee

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      NC MX5

      By MBS206 · Posted

      My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • dbm7
      Automatic Power Button Light Flashing

      By dbm7 · Posted

      Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Duncan
      R34 Plug Identification

      By Duncan · Posted

      Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • joshuaho96
      Automatic Power Button Light Flashing

      By joshuaho96 · Posted

      Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
×
×
  • Create New...