Jump to content
SAU Community

Recommended Posts

Does somebody have a large photo of a fully intact RB20DET from the intake side (out of the car). I need to see which exact hose is leaking coolant. I can see it leaking from underneath. Its where it goes back into the block just near the oil pressure sender and a bit back from the alternator. I think it's the heater hose return, but not sure.

I have the engine manuals in PDF, but useless as batshit for an overall diagram of the whole coolant flow system ;)

Yeah, that is the return.

Have you replaced the little 3 inch hose under the manifold?

Coz if you haven't, I would probably consider it. It will go next.

A real pain to get to though. You'll need a lot of patience.

Have you replaced the little 3 inch hose under the manifold? Coz if you haven't, I would probably consider it. It will go next.

A real pain to get to though. You'll need a lot of patience.

I'll second that! Also be prepared to lose a lot of skin on your hands.

Thanks for the encouragement guys :( It's going to be fun removing most of the manifold I know.

Yeah, once one goes they all tend to. This one is leaking pretty badly. I've traced it along and it goes into just near the thermostat.

I only really just got the car.. he replaced one of them as he said it had a coolant leak when i bought it, but obviously not the right one.

Hehe, I can almost guarantee which one is leaking, it will be the thermo housing to intake manifold coolant line. the small steel nipple coming out of the engine block rusts out and pisses coolant on the ground. If you're lucky you can cover the hole with a longer hose and double hose clamp the little bastard. And replace every single hose underneath the manifold while you have it torn down. It doesn't take very long and is worth the piece of mind.

-Matt

thanks for the advice.. I am pretty sure it's back on one of the actual hose connections (can see it dripping from them), rather than near the thermostat housing, but we'll see. But yeah, that is the one I'm pretty positive is gone.

Probably half a days work to get it all off and fixed up, so working my way up to it :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can ship Nismo floor mats to you: https://www.oemsoko.co.jp/products/nismo-floor-mats-for-skyline-r33-bcnr33-stagea-wgnc34?_pos=1&_sid=9278c1467&_ss=r  
    • Here's the link: https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6642/misc/G49?frame_no=WGNC34-137122 What you think about it? The same product i found on nengun: https://www.nengun.com/oem/parts/40567/MiPwn5qAMfCfmpxHNDnwn5q9MDAx8J-QiW9sZC1qcC0xMTAtRzQ5LS0wMDE/Floor+Carpet+%2F+Mat+2/0688339eba149c19 Bot i have spoken to 😅 ensured me, that mats are 100% original, oem product. I have my doubts. I also heard what you mentioned, that nengun often offers items that are actual not available... On the other hand mats i found on japanese yahoo or ebay are in poor condition and still quite expensive so i'd rather wait for some better offers. My location - Poland. We literaly don't have ANY market for used Stagea parts so need to search outside Europe.
    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
×
×
  • Create New...