Jump to content
SAU Community

Recommended Posts

Got my car dynod today and made 225rwkw at 16psi boost. What do you guys think, im cut seeing sum1 else on the forums pull 240rwkw at 13psi.

Modifications:

GCG 450hp hi flow

Bosh fuel pump

700cc Injectors

Haltec e6x

3 inch exhaust

Dump Pipe

FMIC

Pod Filter

Im spewing coz i had Vortex 98 in my car for the tune and my car was running like shit before i took it in. It is sumtimes pinging is this bad???

Link to comment
https://www.sau.com.au/forums/topic/64326-my-results-after-mods/
Share on other sites

Hi

Basically i have the same as you, only running a pfc instead .... and the tuner REALLY knows his way around the pfc ...

not a bad result tho ... how does it drive ?

Got my car dynod today and made 225rwkw at 16psi boost. What do you guys think, im cut seeing sum1 else on the forums pull 240rwkw at 13psi.

Modifications:

GCG 450hp hi flow

Bosh fuel pump

700cc Injectors

Haltec e6x

3 inch exhaust

Dump Pipe

FMIC

Pod Filter

Im spewing coz i had Vortex 98 in my car for the tune and my car was running like shit before i took it in. It is sumtimes pinging is this bad???

it drives good. I had 171kw before the dyno. Yee the mechanic specialises in in haltech computers he was happy with the result. I rekon with the better fuel i could of got better.

Oh yeee wats this about haveing to change the coils for more power???? the mechanic said its not good to boost it more until i change this?

The stock coils aren't the greatest on an rb25. Seems to be limited to the 25 though, not the 20 or 26 which is a bit strange.

You'll find the car will develop a miss around the point of peak torque over time at higher power if your coils are getting a little old. I'm considering a set of splitfires atm, or retro fitting my rb20 coils and ignitor as an interim measure

I can't work this coil paranoia out, I have no problems at 265 rwkw with standard RB25 coils. Maybe it's because I use NGK copper plugs with 0.8mm gap. I have no problems with RB26 coils at 400+ rwkw either, but I use NGK copper plugs at 0.7mm gap. I have no problems with RB20 coils at 225 rwkw, but I use NGK copper plugs at 0.8 mm gap.

I see a trend there:cheers:

I agree....

Remember you need 3 things to get combustion in a petrol motor...

1. Fuel

2. Air

3. Ignition.....

If you want more power you need to increase the amount of the above to comply...

IE> A V8 has a higher capicity, more fuel and more air with 8 spark plug more ignigition. This equates to power power. A skyline has a turbo and very large injectors for its class. This means more fuel and air but no more ignighton.

You have done the steps to increase air and fuel... Now its time to increase ignightion...

Make sence????

Cheers Col

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sounds good Hmm suppose the main thing is, how much do you care about this car? The filler doesn't make for a very good water barrier lol. If there was a tiny little bit of rust forming now, that in 3 to 5 years time becomes obvious under the paint (starts to bubble up), would it bother you? 
    • I already have the ability to datalog the voltage... what I can't do is correlate it to what the gauge is showing when I'm looking at the data at a later date. Or something like this. Except getting the oil to 125C+ involves me going 200+kmh at the track so you can imagine this is a little tricky unless I do something like note what the voltage is when I am at the top of 5th gear so I have a point to reference on. Drove car today. O2 still reading richer because hopefully not a leak instead of massive restriction I've introduced. Car really doesn't sound like a LS. It's quite strange. Pulled a bit of fuel out up top. This does potentially explain why my spark plugs looked like the car was running pretty over-rich. If I was tuning it to a ~12.7 which in reality was far richer than that in the past. It will be handy to have the dyno WB to compare my WB to to compare notes that's for sure. At this point I'm happy to just sit in the passenger seat and tune the thing given I've got about 7 million hours on the platform lol.
    • Yeah I understand you have to pay for an updated map or subscription service or something. But I can't even find a current map for Australia. My map is dated 2017, but didn't this car version still sell in Australia until 2021?   Also, just as an aside, the navigation system warns you of traffic incidences ahead.....why would they include that on a map they knew is not receiving live information. I am forever going to be warned of an incident that probably existed for 30 minutes 8 years ago.
    • Car has been sold and I am now selling leftover parts. Prices are non-negotiable as I will sell to my mechanic if it won't sell here. Prices are firm except for the Random Parts listed at the very bottom. All parts are genuine except for the S-Tune front bumper. Volk Racing TE37SL 19×10.5″ +12 5×114.3 pressed graphite with P-Zero 275 30 19 tyres [USED] $4,500 Wheels are in perfect condition, have been sitting in my garage for the past 6 years. Tyres still have 90% tread, but since they're now old, I would not recommend you drive hard on them. K-Sport Super Sport External Reservoir Coilovers (made to order) [NEW] $2,500 Front spring rate 14kg, Rear spring rate 7.5kg Fork Type. You can read all about it here (https://www.k-sportracing.com/product_detail.php?Key=12). I was going to start tracking the GTR, but never got around to it. Paid $3500 (after USD conversion and taxes). HKS Kansai Service Tower Bar [NEW] $500 Never fitted in the original Japanese box. R34 GTR S-Tune Fibreglass Bumper [NEW] $500 No mesh - No Box - No damage - just dusty. Nitto RB26 Clear Timing Cover [NEW] $50 Couldn't fit RB2630 due to bonnet clearance. HKS Piping Kit Special Type (BNR34) & Apexi Power Intake Air Filter Kit & Password JDM Adapter [USED] $1,000 Missing some rubber hoses and supports, but you get what you see. Nismo NE-1 Weldina Turbo Back Exhaust & Custom 3.5"straight pipe [USED] $1,000 Needs some love, but perfect for those who want to go back to OEM+. Bayside Blue Aluminium Vspec Bonnet/Hood [USED] $700 Came off my GTR. Unfortunately, the tips have been slightly ground down. It will need some repairing. Bride Low Max Super Seat Rails [USED] $350 The price is for both sides. Will post pictures when I get a chance. Random Parts [USED] - negotiable Standard rb26 cams (intake and exhaust) $10 Stock amber front indicators $10 Standard GTR bumper lower side grills $10 Stock amber side indicators $10 Nismo Sports Resetting ECU $50 Water reservoir $10 Stock airbox mouth $10 Stock fuel rail $10 Stock coilovers from R34 GTR Vspec $100 PM me which items you are interested in. I do work 9-5, so I will be responding daily at best. Best time for pick up is after 5 and before 7 on weekdays, or i can work something out on weekends. I will only accept cash or PayID. Pick up only - located Epping NSW area.
    • sensible choice....and all 32s should be in yellow
×
×
  • Create New...