Jump to content
SAU Community

Recommended Posts

Brand new garrett GT Series turbo rated at 700 hp. This turbo is also

commonly known as the GT35/40R as it has the GT35 turbine wheel

and the larger GT40 compressor wheel.

Front A/R is 0.7

Rear A/R is 0.82

4'' inlet with massive bell mouth to suck in plenty of laminar air

2.5" outlet to suit intercooler pipe work

Turbine housing: GT30 non wastegated.

Inlet: T3

Outlet :GT30

Ball bearings allow the turbo spin forever, even when spun by hand.

Item includes Garrett warranty from date of purchase.

Unlike bushed (STD wet floating bearing) turbos that need replacing/rebuilding

at 40,000 klm in performance applications, this will only require new oil seals

at 80,000 klm. This means long term savings!

Utilizing the latest compressor and turbine wheel design these have proved to

spool up even faster providing more drivability, stronger midrange power and torque

with better reliability.

Inconel turbine shaft which is extremely light allowing quicker turbo response

and heat resilient this turbo is top shelf with no expense spared.

Recommended retail is $2960

Turbo only $1950

67_1_b.JPG

81_1.JPG

bc_1.JPG

HKS Cast manifold.

This will not crack! In addition it can be further ported, extrude honed etc for further improvement if need be. As you can see from the pic's, the design is pretty good. All runners are split as far up to the collector as possible which will give good top end and mid range performance. It even splits the wastegate gasses.

This has a T3 flange, but is big enough to be drilled for a T4 flange if required.

I usually use these with GT30/35/40 BB turbo's due to the T3 flange. Due to the low mount design, you minimize any unwanted attention from the cops! If you need more info feel free to contact us.

Manifld only $950

Manifold and Turbo combination $2700

20_1_b.JPG

73_1.JPG

ff_1.JPG

f8_1.JPG

bd_1.JPG

e0_1.JPG

RB25DET Apex 550 cc injectors $750 cleaned and shipped

RB20DET/RB26 HKS 680cc injectors $750 cleaned and shipped

Moderators still waiting for comeone to replt RE: Trader details etc

These manifolds are not made by HKS anymore. They now produce the Stainless ones which seem to be good! However I cant see them being tuneable in the way of further porting at a later date etc.

So basically there is only 1 available!

So that large turbo will fit in the low mount position ?

What size wastegate would i need for that turbo? HKS 60mm ?

Yes, it will fit! Nice and snug! I have fitted a couple of these to RB30/Rb25 combo's and 1 bar is reached before just 2400 RPM and 2000 with the 3040 turbo!

Wastegate size would depend on the boost you are running and if its dumping to atmosphere or plumbed back. Generally 40mm will be OK in most situations. If for some reason you want to run a measly 7-9 psi, you will need a 50-55mm gate.

Its a common misconception you need large wastegates. They are only to relieve pressure (not flow) in 99% of applications. The other 1 % is in extream circumstances. e.g Cars that have an uncanny amount of exhaust gas. I.e. RB engines wouldnt have anywhere near as much exhaust flow as a 13B even if it had an RB30 bottom end and only if it rev'd to 9,000 rpm or so.

Remember the exhaust wheel on most of these large Hp set up's flow gobs of air and only sight pressure variations are enough to control boost.

But by all means if you have the cash to flash, go big!

What's the reason for selling? How laggy would this turbo be on an RB25DET-NEO with tomei poncams...?

As laggy as a 700 Hp set up would be on an RB25 with flow to make an easy 350 rw kw...

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...