Jump to content
SAU Community

Recommended Posts

Hey guys,

I've got a R33 Gts25t

Suspension/handling mods:

-Tein HA's 10kg front, 8kg back

-9 inch wide 17's

-front strutbrace

Next on List

-Hicas lock bar

-whiteline swaybars

-pineapples/solid mounts

After putting in the HA's the car handles much better, but still find it rolls too much for my liking. I'm going to the track in about 2 months, just wanting some advice about stopping this roll.

I want to get whiteline swaybars, was considering 27mm front, 22mm back, just wondering, who has these and does it really stop the car rolling that much.

I mean, I would have thought the car would sit flat with the hard springs on it, was surprised when it still rolled. (pushing pretty hard)

Any other tips to get the car sitting flat, the car has great grip at the moment, just wanting it to sit flatter, don't want to get swaybars and find they aren't good enough.

I want to be able to go hardout around the track on occasional trackdays without the car rolling around, maybe even a little bit of drifting.

Sydneykid - I know you don't like jap shocks, but they were cheap so I got them and have been impressed, I do like them hard, mostly drive around with them on half, now just want to add to the coilovers with other improved handling parts.

Sorry if the post doesn't make sense, too tired!haha

Oh and are the adjustable swaybars, although smaller diameter still can be adjusted to be more stiff than the biggest non-adjustable one? or not?

Dave

Thanks guys. Can the whiteline adjustables be turned up stiffer than the non-adjustables or not?

I looked on the whiteline website and they have:

FRONT

24mm adjustable

27mm non-adjustable

REAR

22mm adjustable

22mm non-adjustable

It leads me to think the stiffess swaybars to buy would be:

FRONT

27mm non-adjustable

REAR

22mm adjustable

What do you guys think?

On the race R32 GTST, we run 27 mm adjustable on the front and 24 mm adjustable on the rear in the dry and 22 mm adjustable on the rear in the wet. Easily the best and most cost effective handling improvement you can make.

We run no more than 8 kgmm front spings and 4.5 kgmm rear springs, and it will lift the inside front wheel on corner exit using "R" compound tyres. Note that most of the roll you can feel is the outside tyres compressing under the load. As a few of the guys have said, you can easily have suspension that is too stiff and won't absorb the track irregularities. Plus a fast time sometimes requires use of the ripple strips, and you can't do that if the suspension is too stiff to absorb the impact.

Remember the object is to go fast, not rattle your teeth out:cheers:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...