Jump to content
SAU Community

Recommended Posts

Good luck getting that translated

Its really weird. Apparently alot of the auctioneers don't write japanese, they put all their comments in english (or their idea of english) and they actually write in down on the paper with japanese letters. .. So its hard even for japanese speaking people to read..

Not to mention the scribble that is your auction sheet.. They should definately make bigger spaces for comments - considering alot of these cars are highly modified

:headspin:

well there is a few things you can tell about it without needing to read japanese. firstly, it's an accident grade car. secondly it's a 1989 model. body doesn't look too bad. some pin dents and something up with passenger side window, some sratches and possibly indicating some accident repair (not really sure). your buyer should be able to have this interpreted for you.

I can read most of it - it's definitely in japanese, LOL - the core problems with auction sheets are:

1. handwriting tends to be atrocious

2. kanji is small (often this partly to do with the size of the scan) - makes it hard to differentiate

3. they write in a 'code' - a kind of shorthand - people in 'the know' will understand it - but if you don't know the lingo/abbreviations - it can be guesswork only

If no-one transaltes it soon, I'll tell you what I can

(blacky - if you are reading this - I haven't forgotten about you, I just haven't had the time/opportunity to pass on your sheet)

Thanks for your input! =)

The details for this Auction sheet:

R33 N1 turbos

Mines modified ECU

OS twin plate clutch

Mines direct shifter

N1 headlights

Pivot tension rods

Nismo speedo

Adjustable suspension

N1 brake rotors

HKS exhaust (with front pipe)

Mines strut brace

Apexi air filter

Brake master cylinder stopper

Can the mines ecu be tuned in australia?...... And how does it compare to others like the Apexi PFC or E-manage?

:flamed:

bet he's stoked now, N1 turbos... :cheers:

Yeah i'm reading DaiOni, and thats cool, whenever u get round to it is ok. I've had a few people have a stab at it now including J exchange students and they all think its hard to read. But they all manage to get "Rigid Spacer"! .

blacky

here's part 1, I'll try to squeeze in a bit more later:

89 bnr32 GTR, gunmetal grey

* 65,710km. Km are listed as 'unclear' as the car has a nismo speedometer

* r33 rb26dett

*n1 turbos

* frontpipe (downpipe, or whatever you want to call it)

* cat-back exhaust

* mines cpu

* OS twin plate clutch

* mines 'direct shift' (??)

* rollbar

* n1 rotors

* boost meter

* lots of little scratches, including stonechip(s), and scratched rims

* there is a bit that looks like 'no factory parts' - but it's under the bit about the nismo dash (hard to tell if they are connected) - so it may be saying 'has a replacement speedo, and no original speedo' (so - can't verify kms)

I'll need to get my magnifying glass out for the rest, :)

okay, part II...

* I can't deceipher the first 'sales point' - first kanji is 'car', second appears to be 'high', I think the last is chou - which can mean condition/style. It's a total guess, but I think the inference is that this is a 'high-level car' (probably a reference to the degree of modification)

* has 17" rims

* has a 'takuu' bar (?)

* from my translation, it says "The owner has done a lot of modifications to this car, to confirm everything (on the car) come and look at it". I think, it suggests that there may be a lot more mods to the car

* pillow-ball tension rods

* oil catch can

* there's something about lock-nuts and a spare key - but not sure what (I would hope it says that they come with the car...)

* seat(s?) are worn/damaged

* the floor of the boot has been repaired

* the car has had repairs done, including dent repairs ('dent' is a very cool kanji - you learn something every day!)

* there are scratches and dents on the underbody (I'd assume there probably is surface rust too - but that is not listed)

* rear 'spo' (I'm guessing that is an abbrev. form of 'spoiler'...) has a scratch

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
×
×
  • Create New...