Jump to content
SAU Community

Recommended Posts

  • Replies 115
  • Created
  • Last Reply

Top Posters In This Topic

If anyone wants some nice trick alloy bonnet pins that sit flush or 1mm above the bonnet line then let me know. Saw some neat ones at the Motorsport show the other day, skyline_geoff bought some at the Trade Store, im getting mine next week for my new bonnet

I don't need any at this time, but I might in the near future :)

Can you get a business card or details of the distributor when you go get yours please?

Pics would be good too :)

Yhe i have the business card at home. They are actually in NSW, if Geoff sees this he may post some pics. The bottom half that gopes into you radiator support mount is the same as usual, but rather then a pin thru the boonet, you have an aluminium housing the size of a gum leaf that has a push type latch/door.

When you push the latch, it releases the pin and allows you to open the bonnet. To close you clip it back down and its all spring loaded. So sits all neat and flush on the bonnet. Could even be colour coded i guess. They are attached to the bonnet by approx 6 allean head cap screws.

They are advertised in Autosport Engineering and are trick units. Ill check, but im 99% sure they are FIA etc approved so a re well engineered and perfectly safe. When i get back to Melb from Adelaide ill post the details up in the Motorsport section of the forum

what does compression have to do with pinging?

The higher the compression you run, the lower the detonation threshold. i.e. The less boost you can run before you'll start running into detonation problems.

I have never heard ANY tuner who knows his conrod from his clutch say that they can't run more than 13.5psi boost with a stock engine because the compression is too high.

I ran 1.2 bar (17.5psi) on my old GTS-t (I didn't want to run more because it was my daily driver and I didn't want to push the engine too much) and it made 280rwkw. The new owner ran it upto 1.5 bar (21.5 psi) also on the stock engine, and stock compression.

13.5psi = too much? :confused: Sounds like tuner limitation, not compression limitation to me :Oops:

when it hit around 15psi i can hear it ping, thats got really nothing to do with the tuner, i wanted it to be very safe cause i used to use it as a day to day car but now its purely for racing and the od cruize. i got more mods to do soon so we will see.

Oops, Speed.

I guess neither of them would like me confusing the two. Its too late and i had way to much C++...

They don't mind. Both Speed and Wheels are owned by the same publisher. If you confused any of those with Hot4's, or FastFours there would be hell to pay :D lol




  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...