Jump to content
SAU Community

Recommended Posts

Ok since most of u guys have a shit load more experience when it comes to modifications and wat not, thought id post up some stuff im gonna do to my project car (96 gts) now im aiming for around the same power as my 95 gtst (225.1rwkw) or possibly more

i thought it mite be best to start with some stronger internals, and then hook a turbo up later,

what do you guys reckon,

- hypereuretic (however thats spelt) pistons as opposed to forgies coz im not after too much power as yet

- some new camshafts

- a set of valve springs

- possibly a new cam gear or 2 lol

- some conrods and better bolts obviously

now i havent gone into this much detail with my gtst but im not sure how strong the rb25de engine is and if it will be able to handle a good turbo :)

after i strengthen the engine with all the above am i to see any if at all performance improvement before i turbo up :)

thanks anyhelp would be appreciated, also do i need to strengthen anything else before i consider a turbo :)?

Link to comment
https://www.sau.com.au/forums/topic/65657-project-make-gts-go-hard/
Share on other sites

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

Building an engine for NA performance and building one for turbo'd performance are worlds apart.

It would be cheaper to junk the RB25DE and buy a tired RB25DET to do up when the time comes.

In fact it would be cheaper to just sell the NA car and buy a turbo one.

So much is different, Brakes are inferior on the NA for a start.

because i can :) lol i didnt ask for u to comment on how much it wud cost, becoz i know how much more expensive it is, im doin it coz i got money and i can, and coz i wanna be proud of wat ive done to it to get it going harder, and not just chuck in a rb25det in there spend 6grand on mods and achieve the same results ive already achieved in my other skyline, and PTR33 i already have a gtst, i told u its my project, wat part of that do u not understand? if i wanted ur advice on saving money i wud have asked. all i wanted to know was wat else i need to strengthen, not to have some geek comment on how much it would cost, because they are tite

negative cun ts, geez how easy is it to chuck a rb25det in there and do that up, but wheres the fun in that mate? are u my financial advisor or something? i dont wanna take the easier and cheaper option, coz eventually u'd have to do a strengthen internals anyway, this way ive already strengthened and wont have to worry for a while, as for breaks and suspension ive got spare brembos and stock gtr suspension :)

because i can :) lol i didnt ask for u to comment on how much it wud cost, becoz i know how much more expensive it is, im doin it coz i got money and i can,

well guy a GTR and make that go hard.

would be safer for all concerned. And less of a head f*ck

If money is not a problem,

Use a RB30 bottom end and aftermarket crank girdle to allow for big rev's, forged rods, forged pistons and a ~12:1 comp ratio.

RB26 head with a set of really big cams, a nice porting/polish as you will need lots of rev's and as much airflow available to make the power you are after.

After all 225rwkw is around 270-280kw at the flywheel.

Thats a lot of power to be had from a little 2.5 or even 3ltr.

Not sure if it can be done to be honest.

A 3ltr n/a needs 100% VE @ 9000rpm to flow ~360hp at the flywheel which is ~270kw at the flywheel.

A 2.5 n/a with 100% VE needs almost 11,000rpm to flow that same amount of air.

Thats a lot of frequent rebuilds. :)

yeah ive been reading about that it seems really hectic, rb30 bottom end rb26 head been done very nicely by a guy in victoria it think it was he was getting sumwhere around 850kw but thats wit the biggest of hks turbos (single turbo) full worked internals and all, very nice indeed, im not looking for that much power but will definately do some research and see wat can be done. gotta carefully plan this out, slowly work it up etc

ta for the info cubes :)

as Cubes said go for an RB30DE

if you want N/A power you need bigger capacity and lots of revs

i was going to build a twin cam high comp RB30DE

aparently it could have made 250-300KW@W depending on the fuel and tune.

i think thats the way to go if your serious about it

grab an RB30 black and an RB26 head and start building it

IMO its an awesome project good luck with it :)

nice!! doin my research, just need some price figures on the rb30 bottom end etc? yeah its a nice idea, hopefully it works out will, gonna be slow as lol, work 5 days a week spend 2 days on the project LOL :)

because i can :) lol i didnt ask for u to comment on how much it wud cost, becoz i know how much more expensive it is, im doin it coz i got money and i can, and coz i wanna be proud of wat ive done to it to get it going harder, and not just chuck in a rb25det in there spend 6grand on mods and achieve the same results ive already achieved in my other skyline, and PTR33 i already have a gtst, i told u its my project, wat part of that do u not understand? if i wanted ur advice on saving money i wud have asked. all i wanted to know was wat else i need to strengthen, not to have some geek comment on how much it would cost, because they are tite

Here's some advice for you pal

GO FU(K YOURSELF

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • PRICE  : $1400 LOCATION   : NSW Central Coast FIT  :  All Nissan 350Z type Z33 and Infinity G35 Coupe. See delivery note. Hi, brand new, unused, still in the box.  ($1850.00 is what i paid ) My bad luck !!! I thought my right front  Bilstein was cactus so i bought the ST 's to replace all.  Turns out the right front is fine ( loose mounting after service  by a well known importer of Bilsteins ) So im selling the ST's. They are made by KW ( no intro needed ) . Iam on the Central Coast and im willing to meet up in Sydney metro, within reason and Newcastle.
    • Yep, yeah would need to do the flywheel although the 6 bolt NA clutch can handle a 20de if just wants to replace the stocker.
    • No it's fine. Heat sleeve is a thing. With oil running through it it is unlikely. Engine off heat soak can be a thing though. There is no way that you have a leak through the hose. That has pressure behind it and any small hole will turn into a large one in very short order. It is so much more likely to be leaking from the connection.
    • Really? That's piss weak. I didn't know they hobbled the shitboxen that badly. OK. So probs need to buy a flywheel too. But that's not too bad.
    • Hi all. I already posted some newbie-ish questions here and there but this will be my first "big" post. Last summer I went and fulfilled a kind of childhood wish, because I just thought I needed this experience in my life no matter what. The car I bought is a mildly modded 1995 BCNR33 Vspec. It was repainted to a metallic orange color all around and it had all windows reseated. Not so well done black respray in the trunk and a metallic black in the engine bay. From outside it looks very nice except for a minor paint error on the roof and the rear spats needing new adhesive tape. The inside is pretty clean and no broken plastics, missing or faded buttons. Even the adjustable mirrors and trunk antenna work like a charm. Despite a moderately long list of issues I don't (yet) regret buying this car. Most mechanical problems are just due to age, like worn rubbers here and there. The underside sadly has lots of corrosion, especially to the back. It looks like it either has been driven in the winter for a while or it lived near the saltwater in Japan, the rust is nothing terrible but it'll require to be looked after. Mostly panel gaps and all the mounted components underneath are a bit crusty, but I don't think anywhere has progressed so badly that there's going to be holes. Front right jacking rail is crushed and needs some care so it doesn't develop into a rust crater at some point. Worst part is definitely the strut towers. I thought they looked fine but after taking off the strut bar I noticed that it actually started bulging up on the passenger side. Probably would have passed on the car or negotiated down by some thousand Euros more if I had noticed this before buying, but here we are. Trunk area also has signs that there was a water leak to the interior once but nothing too crazy, I guess lots of Skylines had this at some point. As for the list of (known) issues, I'll try to make this compact. I hope the coloring is self explanatory. Mechanical: -Various busted or soon-to-be busted rubber bushings and ball joints. Will replace ball joints with OEM or better and bushings with polyurethane where possible. -Shaking steering wheel at above 80kph -downshift from 5th to 4th is a bit crunchy unless I rev-match, might just try to renew the shifter assembly, but it's not a priority issue -tailshaft centre bearing could use a replacement, is it worth going 1-piece tailshaft as it doesn't look too fresh all around? Chassis: -underbody corrosion on many spots and in hollow spaces, needs to be treated -corrosion on many bolts, hoses, lines, suspension components, subframes, will be treated when replacing of the bushings is needed as time goes on -strut tower top panels and some of the surrounding panels are rusty, so needs fixing. Will look into doing this with a buddy in the winter, otherwise bite the bullet and pay a professional -driver side door is misaligned to the body and needs to go a slight bit more inwards -both door windows are misaligned and have an airgap where the window meets the door at the B pillar -The Aerocatch latches for the bonnet have locks but no keys, need new keys. -driver side door window is kind of gritty and could use a polish -damaged jacking rails and front frame rails, from people lifting the car the wrong way, might have this fixed by a bodyshop Electrical: -Nismo tachometer is just bouncing and displaying nonsense, supposedly worked fine when the stock ECU was still in the car -An old Greddy boost controller sits on the dash which will be removed as it servers no purpose anymore. -a led segment rpm gauge is on the steering column, will probably also be (re-)moved once the Nismo tacho is working correctly -there was an attempt to make the sound system better by the previous owner but it was just inducing noise all the time, ripped out the amp and filters in the back, no music for now -trunk antenna goes up as long as the radio is on regardless of the mode, I want it to only rise if I choose Radio specifically or per switch -3rd brake light is a bit dimmer than the taillights but everything was converted to LEDs so mabye now it just seems dimmer? -reverse light flickers, have to test if that behavior changes when I fiddle with the gear stick. Hope I can get around changing the switch. -Left side taillight, blinker section has minor water intake and is humid after washing. Other side has a hole in it, probably for that exact reason. I'll probably reseal them entirely and plug the holes. Engine: -minor coolant drips on one or the other hose -rear turbo leaks oil onto the exhaust making the car essentially undriveable due to fire hazard -Oil filter relocation kit has an oil drip at the Dash lines, will probably make a new connection there and tighten real good and pray -throttle body assembly is slightly stuck for the first throttle pedal input after sitting for a while I'm always open to suggestions and advice from more experienced people, I'm sure half of this list is easily dealt with and just requires some time and effort to sort out properly. Once I have some proper pictures of the car I will post some in this thread, I just have to remember to take some more once I get the chance to. Will post updates when I have news on anything, I want to try to keep this thread as kind of a logbook as well. Ultimately my goal for this car is to just enjoy it. An engine rebuild is probably going to happen sometime as well, because it is old after all. It will never be fully new again, I am just not that rich. But I want it to look good, work well and not rot away while I drive it. I'm probably gonna spend a lot of money on this journey, hopefully not an unreasonable amount.
×
×
  • Create New...