Jump to content
SAU Community

Recommended Posts

Hi i have an r33 s2 skyline (auto), i have this problem that occurs once a while when i drive, but now its becomming more often. What happens is, when i accelerate and take my foot of the pedal the engine rev's will drop to 0 , when it drops after accelration the engine will sometimes stall and the hicas light lights up.

First of all the hicas light will turn on, then my car will loose all power (including brakes and power steering) and then the engine will shut off at a halt. This has happened to me in intersections and traffic lights so the car is to dangerous to drive atm.

Does anyone know the problem ? and where i could go to fix it ?

thanks for your help !

Link to comment
https://www.sau.com.au/forums/topic/65689-engine-dies-pls-help/
Share on other sites

hicas wont make the car stop as it is your steering.

the reason your brakes and steering are tough is because when the car dies there is no power assistance so your brake booster will stay boosted resulting in your pedal feeling like it wont push in and your steering like it had no power steering.

the hicas check light always comes on in auxilary power which is what it is on when the car conks out as that is the key position .

do a search for this as many people have had similar problems.

but start doing the easy things first like cleaning airflow meter etc.

youll also find that the engine and oil light will pop on aswell as the hicas.

I had the same problem with my R32 Gtst..... intill i find out my head in my RB20det is bent and cooliant from the radiatior is goin through the pistons, droping in compression, which then changes sounds and the engine's revs drop and sometimes dies

ummmm... if its the common problem (sounds like it) alot of people seem to be getting this, its the AFM. i got the same problem with my R32 gts-t four door. only i havnt got the cash to get another AFM. take a look at "engine cut out" threads.

Do you leave overdrive on or off?

I had the same problem as you (see: http://www.skylinesaustralia.com/forums/sh...ead.php?t=65491 ) but when I turn OD off it cures the problem. I just turn OD on when I'm cruising at 50kmh+ and when I goto slow down at lights I just turn OD off to get the RPMs up again.

Note I also have a BOV but it's plumback.

I also learn to give it more throttle around turns (as that's when the stalling usually happens).

yeh i noticed that it helps with Overdrive off, but still i dont want it to stall at all. Another thing is when i go up hills when i accelerate and then let my foot of the pedal, it will def stall. It getting annoying thats why i wanted to see if anyone else had the problem ... ill try the bov first, if it doesnt ill just crash it into a pole lol j/ks cos its reallly pissing me off.

The plumbing from your original standard BOV should be still hanging there so hook that up and get some brackets to secure it so it doesnt leak and I bet your problem is solved. Basically your AFM gets tricked when your Bov vents and thinks that your throttle is still open therefore it momentarily runs rich and stalls the engine. I would imagine it might be worse on auto cars as you dont have as much control on gears shifts.

PS get a manual :headspin:

hmm i have a small rubber tube that runs from the BOV to the engine part ? is that the tube your talking about ? if so, it's already connected

yep sounds like it, I think it connects to your inlet pipe from your afm/air filter, just reconnect that if you can, if you cant buy another BOV that will, youll lose the sound but whats more important...performance or rice.

I would be checking the following.

1. Any vacuum leaks in piping/plumbing/emmision hoses etc.

2. No atmo venting BOV valve, is it set right (better still fit original item)

3. Disconnect the AAC valve connector and make sure the base idle is set correctly.

4. Make sure the idle contact on the TPS sensor is working as it should.

5. Check to make sure the idle voltage on the other TPS is measuring <0.5V at idle.

Im sure it will be one of the above.

It won't just stall for no reason...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...