Jump to content
SAU Community

Recommended Posts

Hey fellas

I saw in a recent post about RB26 Cams in an RB20. I would like to do this, but i have seen that with the stock ECU the idle is pretty messy. If i had a powerfc and got it tuned properly would the car idle better?

Also does anyone have a rough idea of how much increase i would get from this mod?

Finally anyone know the cost of RB26 Cams?

Thanks heaps!

Link to comment
https://www.sau.com.au/forums/topic/66891-rb26-cams-in-rb20-with-power-fc/
Share on other sites

Basicly the workshop doing my tuning has a spare set of 26 cams laying around, so they are gonna fit them up and see what they can do. Should be very interesting. But im prepared to buy tomei cams and adjustable cam gears if needs be later on down the track.

yeah i had a look on nengun.com at cams. then saw someone here put rb26 cams in an RB25 and also an RB20 and they said idle was a little rough so i thought if you had an aftermarket ecu it would make the car idle easier as you could change heaps of stuf etc etc.

It was tried on my car with re-written ecu and Pfc. The results werent that great, ie hopeless.

You can get RB20 cams for around $850, i suggest you get the real deal, or at least get the RB26 cams machined to suit the hydrualics. Thats based on my experience, others seem to have had more luck, but i know of two first hand instances where it was a waste of time, and in my case a waste of money.

Waz, with all due respect, ill bet money you were either sold RB25DE/RB20DET/De cams or something. Or the mechanic that installed your cams still has the RB26 cams sitting in the back of his workshop.

Not meaning to doubt you, but sometimes people you trust lead you astray. I am willing to be proven wrong, and not that you have to prove anything, but i would love to hear from someone that knows for a fact that the cams they have in their hot little hands are RB26 DETT cams, and were isntalled by them , or the installation was witnessed.

It sounds old school tuff, but it just didnt work:(

Waz, with all due respect, ill bet money you were either sold RB25DE/RB20DET/De cams or something. Or the mechanic that installed your cams still has the RB26 cams sitting in the back of his workshop.  

Not meaning to doubt you, but sometimes people you trust lead you astray. I am willing to be proven wrong, and not that you have to prove anything, but i would love to hear from someone that knows for a fact that the cams they have in their hot little hands are RB26 DETT cams, and were isntalled by them , or the installation was witnessed.

It sounds old school tuff, but it just didnt work:(

i don't know what to say to that other than

- my mechanic would not stock any other parts

- i saw the old cams that came out of the engine before they went into the bin (they acutually snapped one getting it out)

- mechanic is a friend of the family

cams were purchased from GT51R who has (had) a well documented white R33 GTR Vspec so i have no reason to doubt the origins of the cams

yes, i actually have no ws of proving if they were specifically rb26 cams as there was no 'rb26' printed on them etc. but my mechanic said that they had a higher lift of about .5mm

next time you are in brisbane you are more than welcome to come and check them out if that is possible (as long as whatever you take off you replace) and you buy me a slab as compensation :P

Waz.

Waz, with all due respect, ill bet money you were either sold RB25DE/RB20DET/De cams or something. Or the mechanic that installed your cams still has the RB26 cams sitting in the back of his workshop.  

Not meaning to doubt you, but sometimes people you trust lead you astray. I am willing to be proven wrong, and not that you have to prove anything, but i would love to hear from someone that knows for a fact that the cams they have in their hot little hands are RB26 DETT cams, and were isntalled by them , or the installation was witnessed.

It sounds old school tuff, but it just didnt work:(

/bitch

Roy, meaning to doubt you but I would place a bet on the fact that your RB26 cams were not installed correctly, and the workshop handling your car had no f'ing idea and jerked you around. Quite possibly they have parts of yours lying around their workshop.

/bitch off

LOL...yeh the installation was definitely the problem with my car. The journal that i stole off Bl4ck32 had a different tolerance to mine. So after running for a while it started to gal, and the inlet cam borderline seized resulting in the timing belt to skip teeth. So i think i can attribute the damage aspect to the tool with the wrences (me) and the different sized journal. When the cams were removed the damage was most evident on that journal I7.

So my thing idled like a piece of sh1t, but i never drove it out the driveway. The cams were cleaned up and tried in a friends R33, and same deal, woudlnt idle too well. He went for a drive and the car was an absolute dog under 4,500rpm then it took off.

Admittedly the PFC wasnt tuned for it, but this particular R33 makes boost like a truck and has a turbo with similar performance to a 2530. So my experiences combined with his, using the exact same R33 GTR cams means that im a little gun shy now of the whole thing.

And personally, i would get them machined to suit the hydraulic lifters before installing them.

Now run off and find some more wicked sh1t to put on my car..just so i can spend the next 18 months farking around/up ...:P

Brisbane? Since when did you move from cold and dreary Melbourne.  

Based on mine and a friends experiences...well, happy to hear more from ppl that got the whole thing workign properly

moved up in jan to study medicine :)

the weather is so good its not funny...

OK didn't read the whole thread but for $280 incl. I can re-grind your GTR cams to hydraulic spec. This is a Nissan grind and it acutally makes the profile larger because there is no more clearance. Do not get overly excited about the increased size because it isn't a huge amount over the GTR cams but it does make them hydraulic and it WILL work in every instance. The area under the lift-duration plot (at the valve) is an increase of 5% over the GTR profile but this is all in lift. So this means you get the same duration at 0.050" but an extra 0.5mm lift at the valve. The base circle will be approximately 0.5mm smaller in diameter which the hydraulic buckets will take up.

I don't want to start a sh1t fight, just offering a solution.

Sorry I didn't organise this earlier Roy... :cheers:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...