Jump to content
SAU Community

Recommended Posts

I'm after a pair to fit onto an R33 GTR. I'm not really fussed if they are new or used, but need a pair ASAP.

Feel free to call 0407 931 097.

Hi,

I've a brand new R34 N1 Turbo (pair)

interested pls email me at [email protected]

cheers

there is different r34 n1 turbos around , i found out when i was in japan recently so i bought gtss's for mine .

I have r33 n1's in my r33 now and they are great , 2530's are old turbos now .

I didn't think the N1's were as good as HKS turbos, just a general idea i've picked up...

can anyone list differences between N1's and HKS 2530/GT-SS, ie what kind of bearing, what are the wheels made from etc?

what do u mean by different R34 n1 turbos? Any part numbers to distinguish??

Yea thats it about 4 or 5 different part numbers and some of them you have to buy the bigger housings seperate so you buy the so called n1 turbo and it comes with the smaller housing then you buy the bigger housing .

The ones i saw on actual cars( Nur spec ) all had the bigger housings , same as the ones i have on my 33 now .

Ferni , all n1 turbos have steel wheels , only r34's have ball bearings , 33 have 360 degree bearing and 32 have 270 .

They are rated about the same hp as 2530's .

  • 1 month later...

ok what numbers are we needing to know to make sure we get the R34 GTR N1 larger housing as part of the deal!

here I was thinking getting either the 2530 or N1 34 was the way to go! but now there are at least 4 types of N1..... hmmmm

help!

oh and if any kind soul has a set of either of these please PM me :)

the bigger .64 sounds nice!

hi ok, all of the r34 n1 turbo's i've seen have had the same housing specs. .64 rear with .60 front. the only ones that didn't come with these specs are the r33 n1's which have small front housing and sometimes small rears as well. all the aa401 aa402 and aa403 have had these larger housings. between the 3 types of r34 n1's the only difference has been in the trim of the front compressor wheels. the later is the pick of the bunch. all of the n1 turbo range mostly use inconol front compressor wheels but all have steel rear wheels.and yes only the r34 series is ball bearing. ok on the topic of hks gt-ss turbo's compaired to n1's ok where to start. basiclly a hks gt-ss uses s15 compressor wheel with hks gt2530 rear turine wheel(or gt2871rs turbine wheel for u aussie turbo nuts as there exactly same wheel) the gt-ss hks turbo's on gtr use very simialar(near identical) housings to the nismo r34 turbz. .64 rear whit .60 front. basiclly the gt-ss will run abit more hp thanks to it's slightly larger rear turbine wheel thanks to it flowing more exhuast gases meaning lower back pressure meaning more hp. also meaning it can run alittle more boost as well and still being ifficient at the same time. any ways just some info

Mark

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Time to decide what’s more import, your power level or your budget because you’re going to struggle to keep both 
    • Our Southern Highlands Cruise is proudly registered with “R U OK?” Day.  Sometimes the best way to check in on your mates is by getting out for a drive together. Sharing a common passion like cars creates the perfect space to chat, connect, and support each other.  A simple “R U OK?” can make all the difference. Let's enjoy the drive, the company, and look out for one another. PLEASE WEAR YELLOW FOR “R U OK?” DAY Sunday 14th September 2025 9:30AM Meeting Crossroads Homemaker Centre 10:00AM Cruise Departure Via Old Hume Hwy 11:45AM Arrival at Mittagong RSL Club Meet Location: Crossroads Homemaker Centre Final Destination: Mittagong RSL Club *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yep, its been down for a while, as I understand it it will be back soon.
    • Yeah I also looked at Plazmaman, but, it ended up alot  cheaper getting black ones through EFI when you also added in the delivery cost
    • Nice shot! They look super clean. The roof rack delete on the black one is interesting. Would like to see more pictures from different angles. It's subtle but could make quite a difference to how the car looks in profile.
×
×
  • Create New...