Jump to content
SAU Community

Recommended Posts

Okay all you slackos,,,round 2 is fast approaching. Same place as the 1st one "Nirimba" which is at the Quakers Hill Tafe. Lets see some Drift,,,Drag ,,,Circuit boys and all you illegal street racers (YES YOU) out there for some mad legal fun.

Neil.

Link to comment
https://www.sau.com.au/forums/topic/68132-motorkhana-2005-2nd-round-03405/
Share on other sites

You guys ever get hassled by cops there? Reason i ask is haven't got licence back yet but keen to check it out as i live around the corner. Is it cool to bring non members and do we just rock up?

what do you race around neil the car park where is the track

Jason,,,Bring the pair of GTR's. You and your father-in-law will have a ball,,,

Motorkhana NSW will hate you as much as they hate me.

Strap on the D01J's buddy and get into it,,,I'll bet you won't go home dissappointed.

Neil.

just make sure to pull the 4WD fuse out of yours :(

Tosh you are kidding. Why the would you pull the fuse on the best 4wd system on the planet. Predominetly RWD till things go wrong and then starts transfering to the front.

I was trying to work out why you would type such a comment and then I remembered that you own a crap box Toyota and wouldn't know any better.

Besides that if Jason turns up with his FIL that makes 3 AWD's which makes a class of it and all the pair have to worry about is a laser.

So are you coming with the new diff in the 810 or was that to hard?. Remember we have a tow car and trailer buddy.

Neil.

Well wouldn't that just piss me off,,,I actually get SAU's best Skyline drifter interested in a Motorkhana and the MINI car club has cancelled the day. How ironic Dan. Oh by the way it would have cost $50 for the day.

Jason,,,just your luck you have box problems cause I would kill you at motorkhana,but we would have had a ball anyway.

It will be interesting when we get both our cars on the track together,,,your GTR against my lightweight sports sedan.

Neil.

Sorry Neil but cancelled works for us - all seem to be doing atm is work on GTRs!

On the bright side, Mark is looking good for Targa and the Yellow Peril is on track for a race debut in April. It might also make a guest appearance at a few khanas for a bit of fun.

  • 1 month later...


  • Similar Content

  • Latest Posts

    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
×
×
  • Create New...