Jump to content
SAU Community

Recommended Posts

What i was really wondering, has anyone made over 300rwkw with the standard dumps and then changed to see a notable difference.

HKS 2530's @1.3-1.6 bar

Oil cooler

PFC pro

twin 3" exhaust

forged pistons 8.8CR

linished, shot peened rods

Jun 1.2 metal head gasket

555cc injectors

044 fuel pump

K&N panel filter

oil catch can

2530's on mine @ 1.2bar with std dumps made 275rwkw@4500rpms on a 2wd dyno dynamics in shootout mode we didn't push any further cause the dyno showed the car leaning out big time which was later to be proved wrong so didn't get to do a full power run.

I've got a set of xforce dump pipes (like hks copy's) here which are going on soon after looking at some standered one's they look very restrictive hopefully when we get around to pulling the turbo's off and bolting up these xforce one's will not only make more power but hopefully see full boost earlier on which is very important . If you have everything apart like you say then I would certainly upgrade the dumps as it's much easier to do so and it will be a bottleneck for the 2530's .

we just use those dump pipes which are one big pipe not the split dump set up.

also from looking at all the jap brands i thinkHKS is the only one apart from the new trust dump/front pipe wich use the split style dump pipes.

the first mods we did to our car was a twin 2.5'' into 3'' front pipe with a set of stainless manifolds and the stainless dump pipes.

with useing a boost controller or anything else we were making 215kw at all four wheels.

with a perfect diagonal line up with the revs.

hope this helps,Ben.

i made custom 3" dump pipes one piece (not split) look very similar to the tomei units for mine in the early days and found them well worth the effect. Better responce and spool up and are still running the same units know at close to 400rwkw

Ok just picked a some Xforce dumps from CRD for $450. They look really nicely made however not perfect. Where the wastegate pipe meets the turbine exhaust pipe there is a lip instead of a smooth transition. I will be grinding this out before installing. Apart from that they are perfect and come with gaskets. Also the pipe size is 47.5mm and then 50mm a cm down after the flange. fine for my 2530's but no good for 2835 and up.

If you want to restrict your turbos, then use the factory dumppipes!!! Good choice on getting a custom set. The factory dumppipes are crap. My brother and I fitted new dumppipes to his car along with N1 turbos. The car sounds a lot throatier now...hence the exhaust has been opened up. Seriously, if you can fit some custom dumps...which you will, you'll be very happy with the result. You will make more power. No doubt about it. Especially you have twin 3" exhausts which would be going to waste with those fatory dumps. You're system is only as strong as your weakest link, in your case, the only link being the dumps.

Keep us posted.

I posted some pics of the CES dumppipes on the N1 turbos I fitted to my bro's GTR. Search and you'll see them bolted on. But in terms of quality, they are the best. I have never seen something like them internally. They are smooth, no dags and flow very well. I have never seen HKS ones tough. Im pretty sure they must be good.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...