Jump to content
SAU Community

Recommended Posts

lifespan of a cat is about 5 years, after that they become useless.. and can actually impede flow.

Sure, they might *look* fine, but the honeycomb material is involved in a chemical reaction in converting the CO (and whatever other chemicals it is engineered to attract).. once its spent, no more cat reaction = cat useless..

yeah, so then you come to me and say "hey Dan, can you buy me one of those super dooper cat's from your work for $170?"

And I say sure...no problems.

You could go the ultra high flow cats which are now available. They are around $240 and flow an extra 40% or so. They are a much larger body though so you have to be aware of space for it.

You forgot Step 6. Get pulled over by transport inspectors who tell you your cat is hollow because of the poisonous gases bellowing out the back

and Step 7. Get fined up to $5000 depending on how 'aware' you were that it was hollow.

If you have the cat casing still on, but just hollow, you can only be fined for emissions...

I know a guy with a hollowed cat, you cant see the gasses coming out, it has to be taken to an inspection station for a test to concluded that, even then see above.

and the fine is on a per cylinder basis AFAIK.

:D for a uselesspost.

Back on topic: The gain from a highflow cat would be VERY minimal maybe 3rwkw max...

haha. They can actually do a gas analysis on the side of the road. And with one of those, you can tell if there is no material in the cat. Your Nitrous Oxides would be through the roof. And as for that, once they find that your cat is hollow....coz any idiot can tell the difference with an analyser, you get a machinery and they fine you. The fine is up to $5000 depending on your involvement.

Thankyou for wasting my time for having to explain it. ;)

put your hands around your neck and squeeze tight, now try and breath out....

same thing in your exhaust, you totally have defeated the purpose to having a highflowing exhaust, especially if you have the original cat which is more than likley blocked having had a high fuel load dumped into it over the years as well as heat which is associated with running more boost.

mine the front side of it melted and was practicly completly blocked when i last replaced it.

also if your planning on gutting a cat just bear in mind that the contents of the honeycomb is reportedly carsonogenic (sp?) (that said you can get cancer from scratching your armpit these days so why worry eh?)

i got my replacement cat from batmbl as well, he was very good to deal with.

as gordon said before, after 5 or so years they are useless, the fronts become melted and blocked and the honeycomb is no longer effective, replacing it with something capable of flowing more and converting more gas is a much better investment than replacing it with another stocker

Im not exactly sure what size my cat-back exhaust is... the previous owner told me the spec of it but i forgot... what i do remember is that its bigger than 3 inches... its either 3.25" or 3.5"...

Now the question is, will have to find a cat with the same size ends? Or will standarad 3" hiflow cat do the job? I just dont wanna end up buying a cat that doesnt fit, or even worse, going to a muffler joint to get them to measure it and find out after paying them $$$ that it would have fitted!

The intuitive response would be that the same size cat would be required but im asking bcoz currently with the cat back exhaust, the bigger exhaust pipe is attached to the smaller stock cat... If you get what i mean...

Also, is it possible to put your car up on a jack and replace the cat yourself with some backyard tools? Is it a complicated process?

Anyway, any help much appreciated!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
×
×
  • Create New...