Jump to content
SAU Community

Recommended Posts

ok this is kind of wierd . I have 18x8.5 inch rims on my r33 . theres a little bit of vibration at about 80-100km but nothing too bad , id assume a wheel alignment would sort it . but my wheel nuts keep coming lose gradually and If i forget to check them it gets to the point where the wheel is loose and you will be driving and you will hear this knocking noise and a couple of the nuts are fully undone . This happened tonight on the freeway and one of my studs broke off! its happened on 3 different wheels , front right and both left so far .

do I need locator rings or something ? theres no problem with stock r33 wheels . also ive got locking nuts . could it be a problem with those ? they do up tight and everything .

Link to comment
https://www.sau.com.au/forums/topic/69561-wheels-problem/
Share on other sites

no spacers . im going to replace the nuts and studs , incase any have been weakened and see if I need center locator rings for the rims . I have a feeling after talking to people it may just be the nuts are not the correct size but ill do it all just incase , studs are cheap anyway . after that a good balance and alignment and see how it goes .

Link to comment
https://www.sau.com.au/forums/topic/69561-wheels-problem/#findComment-1287629
Share on other sites

Similar thing happened to e, about a week after getting my rims, driving on the freeway between 90-110 it was vibrating pretty badly. I figured it was probably just the nuts needing tughtening, but that wasnt it... Next conclusion was that i'd lost a weight and was out of balance...

Took it back the next day and got em to look at it. After rebalancing and wheel alignment it all seems good again... might help.

Link to comment
https://www.sau.com.au/forums/topic/69561-wheels-problem/#findComment-1287878
Share on other sites

Similar thing happened to e, about a week after getting my rims, driving on the freeway between 90-110 it was vibrating pretty badly. I figured it was probably just the nuts needing tughtening, but that wasnt it... Next conclusion was that i'd lost a weight and was out of balance...  

Took it back the next day and got em to look at it. After rebalancing and wheel alignment it all seems good again... might help.

:werd:

If you're noticing most at 80-100 (or thereabouts) then it's highly likely it's a wheel balance that is required. $40, but ring them first to make sure they can balance an 18 x 8.5

Link to comment
https://www.sau.com.au/forums/topic/69561-wheels-problem/#findComment-1289765
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG is has not responded to my emails so far after purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
×
×
  • Create New...