Jump to content
SAU Community

Recommended Posts

Guys, i was wondering if any1 knows how to tell the difference between a 2.5L and 2L gts ?

besides driving it(i wouldnt know since ive never driven a manual nor a powerful car). is there any other alternatives ?

i worried about this becoz i dont want the dealer to be swapping plastic covers, plates etc inorder to fake a 2.5L.

thnx guys

you couls drop something into the bore through the sparkplug hole and find bottom dead center then measure the stroke to top dead centre. Look up this website for the stroke of the two engines and work out which one it is.

Or you could take it for a test drive and give it everything it's got, if it doesn't make any power until over 4000rpm but keeps going till close to 8000rpm(mine stops at 8500) then it's an rb20(and it sounds shit hot doin it) If it makes power under 3000rpm and pulls the shute at 6500 whilst sounding like an angry bastard it's probulary an RB25.

Hope that help

RANT!!! for fark sake.. and you guys call your self skyline driver!!!

 

shame on you...

 

ok here you are.. this will explain it all

 

 

http://zhome.com/rnt/RBEng/Chong.htm

 

 

cheers

Joe

u made my day :D

ohhh hang on. since the rb20de is like a camry engine(no power). i dont think u can import it under sevs eh ?

ohh, so i have nothing to worry about., yaay. :)

you can't import either from memory (RB25DE is just under as well).

the RB20DE is a top feed injector setup, wheras the RB25DE's a side feed. Most RB25DE's have VVT, so they'll have a lump where on an RB20DE it says "RB20".

r34_skyline - Just out of interest sake are you talking about an R34? As visually the RB20DE and RB25DE are very similar, I noticed you mentioned swapping plastic engine covers, which would only apply to R34's

Can't believe no-one has said this already, check the factory VIN plate:

HR34/HR33/HR32 = 2.0L

ER34/ER33/ER32 = 2.5L

Thus H = 2.0L, E = 2.5L. Note that there may be other letters between the H/E and the R, these denote things like HICAS etc.

This of course assumes that the engine hasn't been changed from the factory......

r34_skyline - Just out of interest sake are you talking about an R34? As visually the RB20DE and RB25DE are very similar, I noticed you mentioned swapping plastic engine covers, which would only apply to R34's

yes, exactly.

as u can see, i abit worried about this issue. i dont wanna end up with a 2L wannabe.

im gettin if from a dealer. im hoping they dont try any funny business.

Can't believe no-one has said this already, check the factory VIN plate:

HR34/HR33/HR32 = 2.0L

ER34/ER33/ER32 = 2.5L

Thus H = 2.0L, E = 2.5L. Note that there may be other letters between the H/E and the R, these denote things like HICAS etc.

This of course assumes that the engine hasn't been changed from the factory......

i thought HR stands for 4 door ? mmm, guess im wrong.

RB20.JPG

If you have a careful look at this the RB25 doesn't have the Air Jet Swirl Valve actuator and solenoid found on the intake manifold runners...looks like the RB20 doesn't have a Auxilary Fan on the radiator either.

And the car will be VERY sluggish to drive, much like an old corolla :rofl:

I've heard of a few of the RB20's knocking around down south, so it pays to check thoroughly.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...