Jump to content
SAU Community

deciding on gtr or gtst

nemz

By nemz,
in New South Wales

 Share

Recommended Posts

Deluxe Grand Master

Deluxe

Posted
Posted

Hey,

Don't have a 32 GTR myself, but i figure make sure you get any car cheacked out before buying buying it. If all comes back ok, then your choice on purchace, but i would suggest getting a full service and definatlly a Dyno, as you wouldn't know when the last time it would have had one.

Went through the same issues before buting my 33 GTS wasn't sure what to get, bought my mates GTS and took it to get dyno and it has Power FC and it was all over the shop!!

If your debating the RWD/4WD issue, go the 4WD cos in the GTR's it only takes a relay switch in cab for changing as you please. :headspin:

MR R32 Experienced

MR R32

Posted
Posted

Whichever way you decide to go I would reccommend doing a full inspection including compression and leak down test. Sure it costs more, but will save you money in the long run.

Make sure it is done by a reputable place too. We have plenty of good workshops here in Sydney, so don't skimp on finding the right car.

silver gts-t Grand Master

silver gts-t

Posted
Posted

im not a gtr owner, so can someone explain to me, if i bought a r32 gtr (lets pressume it A1 condition)

and i leave it stock, apart from exhaust and suspension.

what added costs would i encouter that i wouldnt normally with my 32 gtst?

also the car wouldnt be used for trackdays etc....

Hiroshima Screamer Grand Master

Hiroshima Screamer

Posted
Posted

leon look after it and it will look after you i have spent on maintenance but nothing mechanically out of the ordinary. Biggest problem iv had was the clutch but thats all behind me now nothing a twin plate didnt fix .

[WLDCRD] Mentor

[WLDCRD]

Posted
Posted
im not a gtr owner, so can someone explain to me, if i bought a r32 gtr (lets pressume it A1 condition)

and i leave it stock, apart from exhaust and suspension.

what added costs would i encouter that i wouldnt normally with my 32 gtst?

also the car wouldnt be used for trackdays etc....

rebuilding after blowing up 2 turbos instead of 1!

rukus Grand Master

rukus

Posted
Posted

im trying to make the same decision here, except i got 3 car choices - r32/s2-r33 gtst + r32 gtr

duno which way i should go. i need something that will fit this: everyday car - roomy - quick - looks nice - not bad on fuel consumption - no more than $21k (gtr would be imported for less).

Beer Baron Grand Master

Beer Baron

Posted
Posted

unfortunately you will not be able to get a decent GTR imported and ON ROAD for less than 21K any more. also, GTR is not very economical (2.6lt TT lugging around 1500kgs), not very roomy either, but I wouldn't have any other car. :)

GTshortie Proficient

GTshortie

Posted
Posted

GTR! i've got a R33 Gts25t Series 2 but after running my modified gts against a friends DEAD STOCK GTR i was so embrassed that i only managed to match his performance (for a straight line) and i'm running 1.3bar of boost (18.85psi!)

go the GTR! you'll never regret it!

gtrken Grand Master

gtrken

Posted
Posted

R32 GTR's in good nick are ok but there aren't many of those around.

Unless you have the money for insurance and engine rebuild, stick with a GTS-T.

RB26 engines are race orientated motors that from Japan especially will need some reasonable work on them at around 120-140,000 km due to poor servicing, gone through a few hands and been thrashed by everyone.

A good , genuine low km, Jap import with proven history will cost you over 30K these days.

Having said that, we have a client with an Oz delivered one with 230,000km on the clock and the engine is fine ( stand up rev 210 ).:)

Cheers

Ken

gtrken Grand Master

gtrken

Posted
Posted
i thought REV210 drove a GTs25t? pulling 13.4 and stock wif stock turbo and no fmic ..

must of been a while hehe.

:)

He sold it and bought a GTR. As usual the gyro gearloose has been trying the bang for your buck cheap mods.. :) :)

Cheers

Ken

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • nash47
      Cas issue

      By nash47 · Posted

      Did and sync timing with light 
    • MBS206
      Cas issue

      By MBS206 · Posted

      Have you done the Ignition Sync Wizard in the AEM software?
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • MBS206
      RB25DE NEO with Haltech ECU

      By MBS206 · Posted

      You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
×
×
  • Create New...