Jump to content
SAU Community

R33 Power FC, Z32 AFM, 750cc Injectors Etc

GTS32
 Share

Recommended Posts

GTS32 Explorer

GTS32

Posted
Posted

To suit Skyline R33 RB25DET

Power FC

Power FC Hand Controller

Z32 AFM

Sard/HKS 750cc Injectors

Profec A boost controller

Oil Catch Can

Do not want to seperate if possible - Expressions of interest please

What can I expect to receive for the above items?

Regards

R33RWKW Proficient

R33RWKW

Posted
Posted

New PowerFC with controller from www.nengun.com = $1020Approx delivered,

so depending on condition & how old yours is - maybe $600-$800.

Normally 2nd hand Z32 AFM's in good working condition go for $230-$250.

I'm not sure on the others though, hope this helps.

Cheers

geordie Proficient

geordie

Posted
Posted

I think your proly best to split it up.

1. You'll most likely get more $$

2. Some ppl might already have one or the other already. So obviously wont need it all.

3. Im looking for injectors :)

gtrGhosTDoGG11 Experienced

gtrGhosTDoGG11

Posted
Posted

Iam interested in the

Power FC

Power FC Hand Controller

Z32 AFM

What is the condition?

Everything is working?

Whats the reason to take everything off?

Maybe injectors too if the right price.

Will

GTS32 Explorer

GTS32

Posted
  • Author
Posted

The items are my brother's and they are in his car (returning it to standard to sell).

I will check with him how much he wants.

All items were purchased new.

The AFM was purchased new from Nissan approx 2 weeks ago.

At a guess, he would want approx $2,000 for the lot.

Regards,

danieltangtc Rising Star

danieltangtc

Posted
Posted

Hi...doe the Z32 afm come with r33 plug?

Im willing to take the whole lot for $1900 if its ok. I do not want oil catch can though as I already have one

pls pm me if interested in sale

Cheers

Dan

  • 1 month later...
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Latest Posts

    • R32 TT
      33 GTR Broken front wheel knuckle

      By R32 TT · Posted

      Just had this happen to me too.  R32 GTR.   Also broke "just before going out onto the track" - someone up there is looking out for us... Very scary since I was about to do a narrow street course with zero run-off and curbs everywhere. Many people on here upgrading to billet uprights and R35 bearings?   Or buying new OEM knuckles?  I am not keen to replace with another s/h 30 year old fatigued part.
    • joshuaho96
      Coolant leak?

      By joshuaho96 · Posted

      Top off with distilled water and see what happens. If you keep losing coolant then you know to start looking.
    • Murray_Calavera
      Quieter performance exhausts (or muffler add-on options)

      By Murray_Calavera · Posted

      Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • f00stx
      Quieter performance exhausts (or muffler add-on options)

      By f00stx · Posted

      So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
×
×
  • Create New...