Jump to content
SAU Community

Recommended Posts

hi reflex,

i have recently done this, heres what i found. initial powerfc tune $350. then it may need readjustment from knocking or leaning out/running rich etc, should be free as its a retune or fix of previous tune. injectors to fit is about $250 as plenum has to come off. unsure about hiflow fitting. speak to ice performance for pricing gerald or nigel. www.iceperformance.com.au there in chentleham.

my first tune was at protek, they magically decided to run 0.90 bar and maxed out the fuel pump and then dropped the tune cos the fuel pump couldnt keep up, stocker unit. i never asked for boost to be turned up. the tune was left like that i had massive knock and it was running rich. was fixed by ice performance the 2nd time. id say ice performance

I think i will try to bolt the high flow on myself. Will it run on the standard ecu if I keep it on low boost (7psi) til I get the injectors and pfc fitted and tuned.

Creatd are more local to me but i dont mind driving. Has anyone had there car tuned by them?

So having injectors fitted and the Apexi PFC tuned im looking at about $600-650???

  • 3 weeks later...

I have put off going the high-flow turbo for a while. Creatd seem to be the closest tuner for me. For a full tune $350 seems pretty resonable. My cars pretty stock, can i assume i will have 185-195rwkw after pfc tune with the following mods:

-stock turbo

-cai + pod filter

-3" exhaust from the turbo back

-upgraded fuel pump(not sure what one) & surge tank

-FMIC

-iridium plugs

-boost set at 12psi

Take it ICE i rang around for months before my good gear went into my car looking for a tune, nigel and gerald were most helpful and were straight up with me about what to expect power and cost wise. there also perfectionists is the job isnt right they just keep ticking away until its 100%.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...